فهرست مقالات 2022   (تا پایان اردیبهشت ماه 1401)

Quartile

Artjname

IF

Vol.

Authors

Title

1

Chemical Engineering Journal

13.273

430

H. Wang, Z. Jin, X. Hu, Q. Jin, S. Tan, A. R. Mahdavian, N. Zhu, K. Guo

Continuous flow cationic polymerizations

1

Journal of Photochemistry & Photobiology, C: Photochemistry Reviews

12.927

51

J. Keyvan Rad, Z. Balzade, A. R. Mahdavian

Spiropyran-based advanced photoswitchable materials: A fascinating pathway to the future stimuli-responsive devices

1

Green Chemistry

10.182

24

M. Taghizadeh, A. Taghizadeh, M. Khodadadi Yazdi, P. Zarrintaj,  F. J. Stadler, J. D. Ramsey, S. Habibzadeh, S. Hosseini Rad, Gh. Naderi, M. R. Saeb, M. Mozafari, U. S. Schubert

Chitosan-based inks for 3D printing and bioprinting

1

Journal of Power Sources

9.127

538

M. Oroujzadeh, M. A. Nikouei, Sh. Mehdipour-Ataei, M. Amiri

Materials selection for choosing the best composite blend polymeric membrane for hydrogen/oxygen proton exchange membrane fuel cell

1

Separation and Purification Technology

7.312

278

R. Dehghan, J. Barzin

Membrane patterning through horizontally aligned microchannels developed by sulfated chopped carbon fiber for facile permeability of blood plasma components in low-density lipoprotein apheresis

1

International Journal of Biological Macromolecules

6.953

207

A. Saberi, A. Behnamghader, B. Aghabarari, A. Yousefi, D. Majda, M. Victoria Martinez Huerta, M. Mozafari

3D direct printing of composite bone scaffolds containing polylactic acid and spray dried mesoporous bioactive glass-ceramic microparticles

1

International Journal of Biological Macromolecules

6.953

206

A. Sadeghi, M. J. Fatemi, M. Zandi, T. Bagheri, T. Ghadimi, M. Tamimi, M. Pezeshki-Modarres

Multilayered 3-D nanofibrous scaffold with chondroitin sulfate sustained release as dermal substitute

1

Catalysis Today

6.766

388

E. Pump, A. Poater, N. Bahri-Laleh, R. Credendino, L. Serra, V. Scarano, L. Cavallo

Regio, stereo and chemoselectivity of 2nd generation Grubbs ruthenium-catalyzed olefin metathesis

1

Applied Surface Science

6.707

585

M. Zehtab Salmasi, M. Kazemeini, S. Sadjadi, R. Nematollahi

Spinel MgAl2O4 nanospheres coupled with modified graphitic carbon nitride nanosheets as an efficient Z-scheme photocatalyst for photodegradation of organic contaminants

1

Journal of Molecular Liquids

6.165

352

M. Mehdizadeh, S. Sadjad, A. Poater, A. Mansouri, N. Bahri-Laleh

Molecular modelling aided catalyst design for PAO oils hydrofinishing

1

Journal of Industrial and Engineering Chemistry

6.064

108

A. Joorabloo, M. T. Khorasani, H. Adeli, P. Brouki Milan, M. Amoupour

Using artificial neural network for design and development of PVA/chitosan/starch/heparinized nZnO hydrogels for enhanced wound healing

1

Macromolecules

5.985

55

M. Hadaeghnia, Sh. Ahmadi, I. Ghasemi, P. M. Wood-Adams

Evolution of Phase Morphology, Rheology, and Electrical Conductivity of PA6/POE Blends Containing Graphene during Annealing under SAOS

1

International Journal of Pharmaceutics

5.875

615

M. Mohseni , P. Shokrollahi *, J. Barzin

Impact of supramolecular interactions on delivery of dexamethasone from a physical network of gelatin/ZnHAp composite scaffold

1

International Journal of Hydrogen Energy

5.816

47

M. Mohammadi, M. B. Karimi, F. Mohammadi, Sh. Mehdipour-Ataei

Anhydrous proton conductivity of sulfonated polysulfone/deep eutectic solvents (DESs) composite membranes: Effect of sulfonation degree and DES composition

1

microporous and mesoporous materials

5.455

329

E. Asadi, A. Ghadimi, S. S. Hosseini, B. Sadatnia, M. Rostamizadeh, A. Nadeali

Surfactant-mediated and wet-impregnation approaches for modification of ZIF-8 nanocrystals: Mixed matrix membranes for CO2/CH4 separation

1

Journal of Materials Research and Technology

5.039

18

M. Aberoumand, K. Soltanmohammadi, E. Soleyman, D. Rahmatabadi, I. Ghasemi, M. Baniassadi, K. Abrinia, M. Baghani

A comprehensive experimental investigation on 4D printing of PET-G under bending

1

Journal of Materials Research and Technology

5.039

18

E. Soleyman, M. Aberoumand, D. Rahmatabadi, K. Soltanmohammadi, I. Ghasemi, M. Baniassadi, K. Abrinia, M. Baghani

Assessment of controllable shape transformation, potential applications, and tensile shape memory properties of 3D printed PETG

1

Dyes and Pigments

4.889

204

A. Nazari, M. Raeesi, H. Salehi-Mobarakeh, A. R. Mahdavian

Ready-to-use optical H2O2 sensor based on stimuli-responsive polyacrylic film and nanofibers containing spiropyran

2

Colloids and Surfaces A: Physicochemical and Engineering Aspects

4.539

644

R. Ghamsarizade, A. A. Sarabi, Sh. Roshan, H. Eivaz Mohammadloo

Study on release and inhibition action of mixed ZAPP and 8-HQ corrosion inhibitors loaded in pH-sensitive microcapsules for Mg AZ31

2

Colloids and Surfaces A: Physicochemical and Engineering Aspects

4.539

648

B. Fotovvat, M. Behzadnasab, S. M. Mirabedini, H. Eivaz Mohammadloo

Anti-corrosion performance and mechanical properties of epoxy coatings containing microcapsules filled with linseed oil and modified ceria nanoparticles

1

Scientific Report

4.379

12

S. Sadjadi, F. Koohestani, M. M. Heravi

A novel composite of ionic liquid‑containing polymer and metal-organic framework as an efficient catalyst for ultrasonic‑assisted Knoevenagel condensation

1

Journal of Photochemistry & Photobiology, A: Chemistry

4.291

424

S. Sanjabi , J. Keyvan Rad , A. R. Mahdavian

Spiropyran and spironaphthoxazine based opto-chemical probes for instant ion detection with high selectivity and sensitivity to trace amounts of cyanide

1

eXPRESS Polymer Letters

4.161

16

S. Daneshpayeh, I. Ghasemi , F. Ashenai Ghasemi, V. Panahizadeh

Achieve balanced stiffness and toughness properties of nanocomposites based on poly(lactic acid)/polyolefin by using fuzzy rule-based system

1

applied organometllic chemistry

4.105

6719

A. Shams, S. Sadjadi, J. Duran, S. Simon, A. Poater, N. Bahri-Laleh

Effect of support hydrophobicity of halloysite-based catalysts on the  polyalphaolefin hydrofinishing performance

2

Materials Chemistry and Physics

4.099

276

M.H. Shahini a, H. Eivaz Mohammadloo b, Mohammad Ramezanzadeh a, Bahram Ramezanzadeh

Recent innovations in synthesis/characterization of advanced nano-porous metal-organic frameworks (MOFs); current/future trends with a focus on the smart anti-corrosion features

2

Materials Chemistry and Physics

4.094

280

F. Dehghani, M. T. Khorasani, M. Movahedi

Fabrication of Polyurethane-Heparinized carbon nanotubes composite for heart valves application

2

Journal of Physics and Chemistry of Solids

3.995

164

M. Alleshagh, S. Sadjadi, H. Arabi, N. Bahri-Laleh, E. Monflier

Pd on ligand-decorated chitosan as an efficient catalyst for hydrofinishing polyalphaolefins: Experimental and computational studies

1

Journal of the Mechanical Behavior of Biomedical Materials

3.902

126

R. Balilvand, A. Nodehi, J. Keyvan Rad, Mohammad Atai

Solution photo-copolymerization of acrylic acid and itaconic acid: The effect of polymerization parameters on mechanical properties of glass ionomer cements

1

Polym Adv Technol

3.665

33

Sh. Mehdipour-Ataei, S. Babanzadeh, S. Khodami

Thin film nanocomposites from a novel poly(keto ether sulfone) to remove metal ions from wastewater

2

Journal of Solid State Chemistry

3.498

308

S. Sadjadi, F. Koohestani

Composite of magnetic carbon quantum dot-supported ionic liquid and Cu-BDC (CCDC no. 687690) MOF: A triple catalytic composite for chemical transformations

2

Materials Today Communications

3.383

30

Sh. Roshan, H. Eivaz Mohammadloo, A. A. Sarabi, M. Afshari

Biocompatible hybrid chitosan/hydroxyapatite coating applied on the AZ31 Mg alloy substrate: In-vitro corrosion, surface and structure studies

2

Materials Today Communications

3.383

30

A. Hadian Rasanani, B. Kaffashi, J. Seyfi, Sh. Ahmadi

Probing the effect of graphene surface chemistry on compatibility, crystallinity, and viscoelastic response of polylactic acid/polyvinylidene fluoride blends

2

Materials Chemistry and Physics

3.328

278

M. Alleshagh, S. Sadjadi, H. Arabi, N. Bahri-Laleh, E. Monflier

Palladated chitosan-halloysite bead as an efficient catalyst for hydrogenation of lubricants

2

Journal of Molecular Structure

3.196

1250

S. Sadjadi , F. Koohestani

Palladated composite of Cu-BDC MOF and perlite as an efficient catalyst for hydrogenation of nitroarenes

2

Journal of Molecular Structure

3.196

1263

A. Hanifpour, M. Ahmadi, M. Nekoomanesh-Haghighi, N. Bahri-Laleh

Effect of different chain transfer agents in the coordinative chain transfer oligomerization of dec-1-ene

2

Journal of Molecular Structure

3.196

1264

N. Abedian-Dehaghani, S. Sadjadi, M. M. Heravi

Selenium and nitrogen co-doped biochar as an efficient metal-free catalyst for oxidation of aldehydes

1

Polymer Composites

3.171

43

M. H. Karimi, M. M. Mortazavi, S. Ahmadjo, H. Azizi, M. R. Rostami

Improvement in the thermal and mechanical properties of PP/clay nanocomposite using novel ethoxylated oxidized PE wax as a compatibilizer\

1

Journal of Applied Polymer Science

3.125

139

E. Behtouei, M. Zandi, F. Askari, H. Daemi, S. Zamanlui, A. arabsorkhi, M. Pezeshki-Modaress

Bead-free and tough electrospun PCL/gelatin/PGS ternary nanofibrous scaffolds for tissue engineering application

2

Iranian Polymer Journal

3.097

29

Z. Javidi, H. Nazockdast, I. Ghasemi

Effect of graphene/graphene oxide on microstructure development and its impact on electrical conductivity and shape recovery behavior of plasticized starch‑based nano‑biocomposites

2

Journal of Polymer Research

3.097

29

E. Vatankhah, M. Abasnezhad, M. Nazerian, M. Barmar, A. Partovinia

Thermal energy storage and mechanical performance of composites of rigid polyurethane foam and phase change material prepared by one‑shot synthesis method

2

Journal of Polymer Research

3.097

29

M. Masoori, M. Nekoomanesh, S. Posada‑Pérez, R. Rashedi, N. Bahri‑Laleh

Exploring cocatalyst type effect on the Ziegler-Natta catalyzed ethylene polymerizations: experimental and DFT studies

2

Research on Chemical Intermediates

2.914

48

S. Sadjadi, F. Koohestani

Synthesis and catalytic activity of a novel ionic liquid‑functionalized metal-organic framework

2

polymer bulletin

2.87

79

A. Dadpanah, A. Rabiee, F. Mohammadi, A. Ershad Langroudi, M. E. Zeynali

Preparation and characterization of AM‑co‑APTAC/TiO2 nanocomposite for environmental applications

2

polymer bulletin

2.87

79

S. Amiri, Sh. Mokhtari

Synthesis and characterization of modified polyisobutylene‑based dispersants from polyisobutylene succinimides

2

polymer bulletin

2.87

79

H. Abedini, M. R. Rostami, S. Shahsavar

Numerical simulation of atom transfer radical polymerization of styrene by moment and population balance models

2

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION

2.583

27

S. Rahmatkhah, Shahram Mehdipour-Ataei

Synthesis and characterization of novel poly(urethane-amide)s with enhanced thermal stability

2

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION

2.583

27

S. Nazemzadeh, Sh. Mehdipour-Ataei

Novel high performance poly(sulfone-ether-amide-imide)s

2

Inorganic Chemistry Communications

2.495

137

S. Sadjadi, F. Koohestani

Pd on imidazolium ionic liquid modified halloysite: A potent catalyst for the hydrogenation of nitro-compounds under mild reaction condition

2

Inorganic Chemistry Communications

2.495

140

Z. Asadi, S. Sadjadi, M. Nekoomanesh-Haghighi, N. Bahri-Laleh

Effects of acid-treatment of halloysite on the characteristics and catalytic performance of palladated halloysite in lubricants hydrogenation reaction

3

Cell Journal

2.479

24

M. Pezeshki-Modarres, M. Akbarzadeh, D. Ebrahimibagha, M. Zandi, T. Ghadimi, A. Sadeghi, S. Rajabi

ّFabrication and In vitro Evaluation of A Chondroitin Sulphate-polycaprolactone Composite Nanofibrous Scaffold for Potential use in Dermal Tissue Engineering

2

J. Coat. Technol. Res

2.382

19

M. H. Shahini, H. Eivaz Mohammadloo , B. Ramezanzadeh

Recent advances in steel surface treatment via novel/green conversion coatings for anti-corrosion applications: a review study

2

Molecular Biology Report

2.316

49

N. Asghari, Sh. Irani, M. Pezeshki-Modarres, M. Zandi, M. Mohammadi

Neuronal differentation of mesenchymal stem cells by polyvinyl alcohol/gelatin/crocin and betacarotene

2

J Materials: Design and Applications

2.311

236

H. Mansoori , R. Hamzehei, S. Dariushi

Crashworthiness analysis of cylindrical tubes with coupling effects under quasi-static axial loading: An experimental and numerical study

3

Journal of the Iranian Chemical Society

2.019

19

Z. Sepehr, H. Nasr‑Isfahani, A. R. Mahdavian, B. Notash

Synthesis, characterization, and photochromism study of two spiropyran molecules with a terminal alkynyl functional group and their new 1,2,3‑triazoline‑containing derivatives

3

polymers and polymer composites

2

30

S. Daneshpayeh, F. Ashenai Ghasemi, I. Ghasemi

Experimental investigation on mechanical properties of nanocomposites based on poly lactic acid/ polyolefin elastomer reinforced with multi-walled carbon nanotubes, andgraphene nanoplatelets

2

Iranian Polymer Journal

1.899

31

M. Nekoomanesh, M. Hashemi Tabatabaei

Iranian Polymer Journal 30th Anniversary issue

2

Iranian Polymer Journal

1.899

31

A. Hanifpour, N. Bahri‑Laleh, A. Mohebbi, M. Nekoomanesh‑Haghighi

Oligomerization of higher α‑olefins to poly(α‑olefins)

2

Iranian Polymer Journal

1.899

31

Sh. Mehdipour-Ataei

Polymers and clean energy

2

Iranian Polymer Journal

1.899

31

N. Rastegar, A. Ershad‑Langroudi, H. Parsimehr, Gh. Moradi

Sound‑absorbing porous materials: a review on polyurethane‑based foams

2

Iranian Polymer Journal

1.899

31

A. Soroushnia, F. Ganji, E. Vasheghani‑Farahani, H. Mobedi

Effect of combined stabilizers on midazolam nanosuspension properties

2

Iranian Polymer Journal

1.899

31

M. R. Jozaghkar, F. Ziaee, S. M. Jalilian

Synthesis, kinetic study and characterization of living anionic polymerized polystyrene in cyclohexane

2

Iranian Polymer Journal

1.899

31

A. Soleimannezhad, S. M. M. Mortazavi, S. Ahmadjo, S. Mansouri, R. Rashedi

Study on polymerization conditions in homo‑ and copolymer syntheses of norbornene/1‑hexene with nickel‑based late‑transition metal catalyst