دکتر قاسم نادری

صفحه اصلی > منوهای بالای سایت > اعضای هیات علمی  > دکتر قاسم نادری  
آخرین اخبار
برگزاری جلسه هیئت امنای پژوهشگاه پلیمر و پتروشیمی ایران
1401/11/17
دکتر محمد حسین بهشتی به عنوان مدیرکل دفتر حمایت و پشتیبانی امور پژوهشی وزارت علوم منصوب شد
1401/11/17
دکتر مژگان زندی به عنوان یکی از بانوان تاثیرگذار کشور انتخاب شد
1401/11/2

Curriculum Vitae

Ghasem Naderi
(Ph.D., M.Sc., B.Sc.)
 Professor







 
Iran Polymer & Petrochemical Institute (IPPI)
P.O. Box: 14965/115, Postal Code: 1497713115, Tehran, IRAN
 
1-Personal Information:
First name: Ghasem
Surname: Naderi
Languages: Persian, English & French.
Tel: (+98 21) 44787081
Fax: (+98 21) 48662520
Email: G.Naderi@ippi.ac.ir
 
 
 2- Educations:
  1. Ph.D. in Polymer Engineering (2006), Polytechnique of Montréal,    Montreal, Canada.  
         Thesis: Nanocomposite Thermoplastic Elastomers based on EPDM/PP.
  1. M.Sc. in Polymer Engineering (1995), Amirkabir University, Tehran, Iran.
         Thesis: Thermoplastic Elastomer based on Dynamically Vulcanized  
                      NBR/PU.
  1. B.Sc. in Polymer Engineering (1991), Amirkabir University, Tehran, Iran.
         Thesis: Mechanical and Rheological Properties of NR/SBR/Non-black
                      Reinforced Fillers.
 
 3- Scholarship & Awards:
  1. Award of a full scholarship from The Iranian Ministry of Science, Research and Technology for my Ph.D. program in Canada (2002-2006).
  2. Natural Sciences and Engineering Research Council of Canada (NSERC), 2002-2006.
  3. Selected by Iran Polymer & Petrochemical Institute and awarded by the Director of the Institute as a distinguished researcher (A/Professor) in 2010.
  4. Selected by Iran Polymer & Petrochemical Institute and awarded by the Director of the Institute as a distinguished researcher (A/Professor) in 2011.
  5. Selected by Iran Polymer & Petrochemical Institute and awarded by the Director of the Institute as a distinguished researcher (A/Professor) in 2012.
  6. Selected by Iran Polymer & Petrochemical Institute and awarded by the Director of the Institute as a distinguished researcher (A/Professor) in 2013.
  7. Selected by Iran Polymer & Petrochemical Institute and awarded by the Director of the Institute as a distinguished researcher (A/Professor) in 2015.
  8. Selected by Iran Polymer & Petrochemical Institute and awarded by the Director of the Institute as a distinguished researcher (A/Professor) in 2016
                                         
 
 4- Reviewer:
 
  1.     Iranian Polymer Journal (English), Published by Springer.
  2.      Journal of Vinyl & Additive Technology Published by John Wiley &
     Sons, Inc.
  1.      Fibres and Polymers Published by Springer. 
  2.      Iranian Journal of Polymer Science &Technology (Persian), Published by the Iran 
           Polymer & Petrochemical Institute.
  1.      Journal of Composite Materials, Published by Sage Publications.
  2.      Iranian Journal of Basparesh (Persion) Published by the Iran 
           Polymer & Petrochemical Institute.
 
 5- Teaching Experience:
 
  1. Engineering Properties of Polymers
  2. Physical and Mechanical Properties of Polymers
  3. Transport phenomena
  4. Elastomers
  5. Rheology
  6. Advanced Physical Chemistry of Polymers
 
 
 6- Scientific Society and Journal Member:
 
  1. Iran Polymer Society (IPS).
  2. Society of Plastics Engineers (SPE).
  3. Member of Organizing Committee & Editorial Board of the Iranian Journal of Basparesh.
  4. Polymer Processing Society (PPS).
  5. Iranian Association of Chemical Engineering (IAChE) (Member)
 
 7- List of Publications:
I: Books
  1. Naderi G., Lafleur P. G., Dubois C. , Nanocomposite Thermoplastic  Elastomer based on EPDM/PP, Lambert Academic Publishing, www.amazon.com,  3838320786, (2009).
  2. Naderi G., Shokohi S., Rheology, Amir kabir Jahad Daneshgahi Press, (2010).
  3. Bakhshandeh G.R., Naderi G., Khosrokhavar R., Elastomer Engineering, Iran Polymer & Petrochemical Press, (2011).
  4. Esmizadeh E., Naderi G.,, Vahidifar A., Elastomer composites in Electronics, Electronic applications of Polyacrylic rubber and its composites, Springer, (2016).
  5. Shokoohi S., Naderi G., Davoodi A., Nanocomposite Materials: Synthesis, Properties and Applications, Mechanical properties of nanomaterials, Taylor & Francis, (2017).
  6. Esmizadeh E., Naderi G.,, Vahidifar, Dubois C., Handbook of Ecomaterials, Springer International Publishing, (2018).
II: Journal Papers:
          English:      
 
  
  1. Rafei M. Ghoreishy M.HR., Naderi G., Computer Simulation of Tire Rolling Resistance using Finite Element Method: Effect of Linear and Nonlinear Viscoelastic models, Journal of Automobile Engineering, In Press (2018).
  2. Paran M., Naderi G., Babakhani A., An experimental study of the effect of CNTs on the mechanical properties of CNT/NR/EPDM nanocomposites, Polymer Composites Journal, In Press (2018).
  3. Zoghi S., Shokohi S.,Naderi G., Ehsani M., An Investigation into Hyper-elastic Behavior of Butadiene Rubber/Epoxy-Polyester Hybrid/Nanoclay Nanocomposites, Polymer Composites Journal, In Press, (2018).
  4. Paran M., Naderi G., Ghoreishy M., Heydari A., Enhancement of mechanical, thermal and morphological properties of compatibilized grapheme reinforced dynamically vulcanized thermoplastic elastomer vulcanizates based on polyethylene and reclaimed rubber, Composites Science and Technology, 161, 57-65, (2018).
  5. Paran M., Naderi G., Ghoreishy M., Dubois C., Multiscale modeling of polymer systems comprising nanotube-like inclusions by considering interfacial debonding under plastic deformations, Composites Structures, 194, 302-315, (2018).
  6. Paran M., Naderi G., Ghoreishy M., Dubois C., Essential work of fracture and failure mechanism in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR grafted HNTs, Engineering Fracture Mechanics, 200, 251-262, (2018).
  7. Sahraeian R., Esmizadeh E., Esfandeh M., Naderi G., Dubois C., Hybrid Effect of Nanoperlite and Nanoclay on Mechanical and Rheological Properties of Low-Density Polyethylene, Journal of Polymer & Composites, Vol 6, Issue 1, P 1-9, 2321-2810, (2018).
  8. Jahed M., Naderi G., Ghoreishy M., Microstructure, Mechanical, and Rheological Properties of Natural Rubber/Ethylene Propylene diene monomer Nanocomposites reinforced by multi wall carbon nanotubes, Polymer Composites, 39, S2, E745-E753, (2018).
  9. Mostafapour A., Naderi G., Nakhaei M. R., Effect of process parameters on fracture toughness of PP/EPDM/nanoclay nanocomposite fabricated by novel method of heat assisted Friction stir processing, Polymer composites, Vol 39, Issue 7, P 2336-2346, (2018).
  10. Shemshadi R., Naderi G., The relationship between rheological behavior and microstructure of nanocomposite based on PA6/NBR/Clay, Polymer Composites, Vol 39, Issue 7, P 2403-2410, (2018).
  11. Asgarzadeh Z, Naderi G., Morphology and Properties of Unvulcanized and Dynamically Vulcanized PVC/NBR Blend Reinforced by Graphene Nanoplatelets, International Polymer Processing, XXXIII, Vol 33, No 4, P 497-505, (2018).
  12. Rafei M., Ghoreishy M., Naderi G., Thermo-Mechanical Coupled Finite Element Simulation of Tire Cornering Characteristics-Effect of Complex Material Models and Friction Law, Mathematics and Computers in Simulation, Vol. 144, pages 35-51, (2018).
  13. Esmizadeh E., Naderi G., Arezomand S., Mazinani S., Fabrication and characterization properties of polypropylene polycarbonate clay nanocomposites prepared with twin screw extruder, SECM, 25, 1, 31-19, (2018).
  14. Naderi G., Organoclay-Reinforced Dynamically Vulcanized Thermoplastic Elastomers of Polyamide-6/Polyepichlorohydrin-co-Ethylene Oxide, Polymer Composites,   Volume 38, Issue 9, Pages: 1948–1956, (2017).
  15. Haghnegahdar M., Naderi G., Ghoreishy M., Electrical and thermal properties of a thermoplastic elastomer nanocomposite based on polypropylene ethylene diene monomer grapheme, Soft Materials, Vol 15, No.1, 82-94, (2017).
  16. Haghnegahdar M., Naderi G., Ghoreishy M., Fracture toughness and deformation mechanism of unvulcanized and vulcanized polypropylene ethylene propylene diene monomer grapheme nanocomposites, Composites and Science Technology, 141, 83-98, (2017).
  17. Haghnegahdar M., Naderi G., Ghoreishy M., Microstructure and Mechanical Properties of Nanocomposite based on Polypropylene Ethylene Propylene diene monomer grapheme, International Polymer Processing, XXXII, 1, 72-83, (2017).
  18. Esmizadeh E., Irani A., Naderi G., Ghoreishy M., Dubois C., Effect of carbon nanotube on PA6/ECO composites: Morphology development, rheological, and thermal properties, Journal of Applied Polymer Science, 135, 45977(109), (2017).
  19. Paran M., Naderi G., Ghoreishy M., Microstructure and Mechanical Properties of Thermoplastic Elastomer Nanocomposites based on PA6/NBR/HNT, Polymer Composites, Vol. 38, Issue S1, Pages E451-E461, (2017).  
  20. Razavi-Nouri M.,Karami M., Naderi G., Rheological behavior and morphology of acrylonitrile-butadiene rubber/poly(ethylene-co-vinyl acetate) blends filled by various organoclay contents, Applied Clay Science, Vol. 145, 1, 1-10, (2017).
  21. Vahidifar A., Esmizadeh E., Naderi G., Varvani A.,  Ratcheting response of nylon fiber reinforced natural stress/styrene butadiene rubber composites under uniaxial stress cycles: Experimental studies, Fatigue Fract Eng Mater Struct, 1, 1-10, (2017).
  22. Shokoohi S., Naderi G., Kharazmkia M., Ghoreishy M., Hyper-elastic Model Analysis of Stress-Strain Behavior in BR/EPDM Nanocomposites, Journal of Vinyle & Additive Technology, 23, 21-27, (2017).  
  23. Salimi, A., Naderi G., Ghamgosar V., Bakhshandeh G.R., A Comparative study on Dispersion of Carbon Nanotubes in (Styren-Butadiene Rubber)-based Nanocomposites, Journal of Vinyle & Additive Technology, 23, 28-34, (2017).
  24. Esmizadeh E., Naderi G., Bakhshandeh G., Fasaei M., Ahmadi S., Reactively compatibilized and dynamically vulcanized thermoplastic elastomers based on high density polyethylene and reclaimed rubber, Polymer Science, Series B, Vol 58, No. 3, P 1-10, (2017).
  25. Ahmadi A., Arab M., Naderi G., Nakhaei M., Optimization of CO2 laser welding process parameters of PP EPDM clay nanocomposites using response surface methodology, Mechanics & Industry, 18, 220, (2017).
  26. Nakhaei M. R., Naderi G., mostafapour A., Optimization of mechanical properties of PP/EPDM/Clay Nanocomposite Fabricated by Friction Stir processing with Response surface methodology and Neural Networks, Polymer Composites, 38, E421-E432, (2017).
  27. Mostafapour A., Naderi G., Nakhaei M. R., Theoretical models for prediction of mechanical behavior of the PP/EPDM nanocomposites fabricated by friction stir process, Polyolefines Journal, Vol 4, No.1, 99-109, (2017).
  28. Esmizadeh E., Naderi G., Paran M., Preparation and characterization of hybrid nanocomposites based on NBR/Nanoclay/Carbon Black, polymer composites, 38, E181-E188, (2017).
  29. Delkash M., Naderi G., Sahraeian R., Esmizadeh E., Crystallization, structural and mechanical properties of PA6/PC/NBR ternary blends: effect of NBR-g-GMA compatibilizer and organoclay, SECM, Science Engineering Composites Materials, 24, 5, 669-678, (2017).
  30. Paran M., Naderi G., Ghoreishy M.,Effect of Halloysite nanotube on Microstructure, Rheological and Mechanical Properties of Dynamically Vulcanized PA6/NBR Thermoplastic Vulcanizates, Soft Materials, Vol.14, No. 3, 127-139, (2016).
  31. Ghoreshy M., Naderi G.,  Pahlavan M., An investigation into the thermal transport properties of PP/EPDM/clay nanocomposites using a new combined experimental numerical method, Plastics, Rubber and Composites, Vol. 45, Issue 5, P 229-237, (2016).
  32. Naderi G., Ghoreishy M., Moradi M., Effect of Modified Single-Wall Carbon Nanotubes on Mechanical and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on Polyamide 6/Acrylonitrile Butadiene Rubber, Journal of Vinyle & Additive Technology, Vol 22, issue 3, P 336-341,  (2016).  
  33. Naderi G., Khosrokhavar R., Shokohi Sh., Dynamically Vulcanized PP/EPDM Nanocomposites: Effect of Mixing Sequence on Structural, Rheological and Mechanical Properties, Journal of Vinyl & Additive Technology, Vol. 22, issue 3, P 320-325, (2016).
  34. Esmizadeh E., Naderi G., Yousefi A., Milone C., Investigation of curing kinetics of epoxy resin novel nanoclay carbon nanotube hybrids by non-isothermal differential scanning calorimetry, Journal of Thermal Analysis Calorimetry, 126, 771-784, (2016).  
  35. Rounagh Baghban M., Mohammadi F., Naderi G., Surface characterization of polybutadiene and natural rubbers oxidized by silver(II), Soft Materials, Vol.14, No. 3, 187-198, (2016).
  36. Rounagh Baghban M., Naderi G., Mohammadi F., Mediated electrochemical oxidation of vulcanized polybutadiene/organoclay nanocomposite characterization and kinetic study, Polymer degredation and stability,131, 30-41, (2016).
  37. Molavi F., Soltani s. Bagheri R. Naderi G., Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber, Polyolefines Journal, Vol 3, No. 2, 69-77, (2016).
  38. Nakhaei M. R., Naderi G., mostafapour A.,  Effect of Processing Parameters on Morphology and Tensile Properties of PP/EPDM/Organoclay Nanocomposites Fabricated by FSP, Iranian Polymer Journal, 25, 179-191, (2016).  
  39. Shokoohi S., Naderi G., Development and Experimental Validation of Morphology Predictive Model for Compatibilized Ternary Polymer Blends I. Effect of Interfacial Tension, , JOM, 68, 1, 37-48, (2016).   
  40. Esmizadeh E., Naderi G., Yousefi A., Milone C., Thermal and Morphological Study of Epoxy Matrix with Chemical and Physical Hybrid of Nanoclay/Carbon Nanotube, JOM, 68, 1, 362-373, (2016).
  41. Paran M., Naderi G., Ghoreishy M., XNBR grafted halloysosite nanotube core shell as a potential compatibilizer for immiscible polymer systems, Applied surface science, 382, 63-72, (2016).
  42. Paran M., Naderi G., Ghoreishy M., Mechanical properties development of high CAN nitrile butadiene rubber /organoclay nanocomposites, Plastic Rubber & Composites, Vol 45, No. 9, 389-397, (2016).
  43. Paran M., Naderi G., Ghoreishy M., Novel nanotube reinforcers for safe polyamide 6 based nanocomposites, Plastics Research Online, 10, 2417, 1-4, (2016).
  44. Esmizadeh E., Yousefi A., Naderi G., Drastic increase in catalyst productivity of nanoclay-supported CVD-grown carbon nanotubes by organo-modification, Applied Clay Science, 118, 248-257, (2015).  
  45. Ghoreishy M., Naderi G., Rohandeh , An Experimental Investigation on the Effect of Ozone Degradation on Hyperelastic Behavior of a NR/BR Compound, Iranian Polymer Journal, 24, 1015-1024, (2015).  
  46. Ahmadi S., Jahani Y., Naderi G., Asadollahazdeh, Super tough PA6/NBR nano alloy through in-situ polymerization of Ε-caprolactam in the presence of NBR nano-phase, Journal of Vinyl and Additive Technology, 21, 116-121, (2015).
  47. Esmizadeh E., Yousefi A.A., Naderi G., Effect of type and aspect ratio of different carbon nanotubes on cure behavior of epoxy-based nanocomposites, Iranian Polymer Journal, 24, 1-12, (2015).
  48. Esmizadeh E., Naderi G., Barmar M., Effect of Organo-clay on properties and mechanical behavior of Silicone rubber, Fibers and Polymers, 15, 11, 2376-2385, (2014).
  49. Soltani S., Naderi G., Mohseniyan, Mechanical, Morphological and Rheological Properties of short nylon fiber reinforced acrcylonitrile butadiene rubber composites, Fibers and Polymers, 15, 11, 2360-2369, (2014).
  50. Firouzbakht M., Ghoreishy M., Naderi G., Parameter Determination and Experimental Verification of Bergström-Boyce Hysteresis Model for Rubber Compounds Reinforced By Carbon Black Blends, Journal of Materials and Design , 53, 457-465, (2014).
  51. Azizli A., Naderi G., Bakhshandeh G.R, Soltani S., Askari F., IIR/CR Rubber Blend Organoclay Nanocomposites, Rubber Chemistry and Technology, Vol.87, No.1, 10-20, (2014).  
  52. Shokrzadeh A., Naderi G., , Esmizadeh E., Mechanical and rheological properties of calcium carbonate-filled ethylene propylene diene elastomer reinforced by metallic acrylate salt, Fibers and Polymers, Vol. 15, No. 8, 1694-1700, (2014).
  53. Mirzaei M., Naderi G., Shataheri S. J., Rahimi A., Mohammadfam I., Jahangiri M., Mechanical and barrier properties of XNBR-Clay Nanocomposite: as a promising material for protective gloves, Iranian Polymer Journal,23, 289-296, (2014).
  54. Andideh M., Naderi G., Ghoreishy M.H.R. Soltani S., Effect of nanoclay and short nylon fiber on morphology and mechanical properties of nanocomposites based on NR/SBR, Fibers and Polymers, Vol. 15, No.4, 814-822, (2014).
  55. Mirzaei M., Naderi G., Shataheri S. J., Rahimi A., Mohammadfam I., Jahangiri M., Transport Properties of Carboxylated Nitrile Butadiene Rubber(XNBR) nanoclay Composites: a Promising Material for Protective Gloves in Occupational Exposures, Journal of Environmental Health, Science and Engineering , 12,51, 1-8, (2014).
  56. Shokrzadeh A., Naderi G., Bakhshandeh G. R., Zohorianmehr M., J., Esmizadeh E. Improvement of the mechanical properties of carbon black-filled EPDM using a metallic acrylate salt as filler, , Journal of Composite Materials, Vol.48(4), 471-481, (2014).
  57. Hajibaba A., Naderi G. ,Esmizadeh E., Ghoreishy M.H.R., Morphology and dynamic- mechanical properties of PVC/NBR blends reinforced with two types of nano particles, Journal of Composite Materials, Vol. 48(2), 131-141, (2014).
  58. Ghoreishy M., Naderi G., Azarandaz K., FE analysis reliability experimental verification of the predicted stiffnesses for a statically loaded tire in FEA, Tire Technology International, (2014).  
  59. Haghnegahdar M., Naderi G., Bakhshandeh G.R. , Ehsani M., Shokoohi S., An Investigation into Elastomer Nanocomposites based on SBR/Epoxy Polyester hybrid/organoclay, Materials Research Innovations, Vol. 17, No.7, 483489,(2013).
  60. Esmizadeh E., Naderi G., Ghoreishy M H R, Modification of theoretical models to predict mechanical behavior of PVC/NBR/organoclay nanocomposites, Journal of Applied Polymer Science, 130, 3229-3239, (2013). 
  61. Alimi M, Mizani M., Naderi G., Shokohi Sh., Effect of Inulin Formulation on the Microstructure and Viscoelastic Properties of Low-fat Mayonnaise containing Modified Starch, Journal of Applied Polymer Science, 130, 801-809, (2013).
  62. Tolooei S., Naderi G., Shokoohi S., Soltani S., Elastomer Nanocomposites Based on NBR/BR/Nanoclay: Morphology and Mechanical Properties, Journal of Polymer Engineering , 33, 2, 133-139, (2013).
  63. Kharazmkia M., Naderi G., and Ghoreishy M.H.R. Shokoohi, S. Elastomer Nanocomposites based on BR/EPDM/Organoclay, Rubber Chemistry and Technology, 86, 2, 299-312, (2013).  
  64. Nakhaei M. R., Arab N. B.,  Naderi G., Hosenpor M., Experimental Study on Co2 laser welding parameter for Polypropylene-Clay Nanocomposite Welds, Journal of Mechanical Science & Technology, 27, 3, 843-848, (2013).    
  65. Andideh M., Naderi G., Ghoreishy M.H.R. Soltani S., Nanocomposites based on NR/SBR: Effects of Nanoclay and Short Nylon Fiber on the cure characteristics and Thermal Properties, Polymer-Plastics Technology and Engineering, Vol. 52, 1016-1024, (2013).
  66. Nakhaei M. R., Arab N. B., Naderi G.,  Application of response surface methodology for weld strength prediction in laser welding of polypropylene/clay nanocomposite, Iranian Polymer Journal, Vol. 22, No. 5, 351-360, (2013).
  67. Alimi M, Mizani M., Naderi G., Mortazavian M, Moghadam B., Development of Low-fat Mayonnaise containing combined mixtures of different types of Inulin, Journal of Food, Agriculture & Environment,, Vol. 11 (1):99-104, (2013).
  68. Zarei M., Bakhshandehb G. R., Naderi G., Shokoohi S., Ternary  Elastomer Nanocomposites Based on NR/BR/SBR: Effect of Nanoclay Composition, Journal of Applied Polymer Science, Vol. 127, 3, 2038-2045, (2013).
  69. Alipour A., Naderi G., and Ghoreishy M.H.R., Effect of Nanoclay Content and Matrix Composition on Properties and Stress Strain Behaviour of NR/EPDM Nanocomposites, Journal of Applied Polymer Science, Vol. 127, 2, 1275-1284, (2013).
  70. Rafei M., Ghoreishy M., Naderi G.,  Optimization of the Vulcanization Process of a Thick Rubber Article Using an Advanced Computer Simulation Technique, Rubber Chemistry and Technology, , Vol. 85, No. 4, pp. 576-589. (2012).  
  71. Ghoreishy M., Rafei M., Naderi G., Advances in simulation of the tire curing process, Tire Technology International Journal, (2012).  
  72. Rajabian M.,Samadfam, M.,  Naderi G., Beheshty M., Shearing and Mixing effect on Synthesis and Properties of organoclay/polyester nanocomposites, Rheologica Acta, 51, 1007-1019, (2012).
  73. Bagheri M., Ghoreishy M., Naderi G., Soltani S., Finite Element Modeling of the Flow of a Rubber Compound Through  an Axisymmetric Die Using the CEF Viscoelastic Constitutive Equation, Journal of Applied Polymer Science, Vol. 125, 5, 3648-3657, (2012).
  74. Hajibaba A., Naderi G., Ghoreishy M.H.R., Bakhshandeh G.R., Razavi-Nouri M., Effect of Single Wall Carbon Nanotube on Morphology and Mechanical Properties of NBR/PVC blends, Iranian Polymer Journal, , Vol. 21, No.8, (2012).. 
  75. Ersali M., Fazeli N., Naderi G., Preparation and properties of EPDM/ NBR/ Organoclay nano-composites, International Polymer Processing, XXVII, 2, (2012).
  76. Razmjooei F., Naderi G., Bakhshandeh G.R., Preparation of Dynamically Vulcanized Thermoplastic Elastomer Nanocomposites Based on LLDPE/Reclaimed Rubber, Journal of Applied Polymer Science, Vol. 124, 4864-4873, (2012). 
  77. Shokohi Sh., Arefazar A., Naderi G., Compatibilized PP/EPDM/PA6 Ternary Blends: Extended morphological studies, Polymers for Advanced Technologies, 23, 418-424, (2012).
  78. Mahallati P., Arefazar A., Naderi G., Thermal and morphological properties of thermoplastic elastomer nanocomposites based on PA6/NBR, Iranian Journal of Chemical Engineering, Vol. 8, No. 1, (2011).
  79. Esmizadeh E., Naderi G., Ghoreishy M., Bakhshandeh G., Optimal parameter design by using taguchi method for mechanical properties of NBR/PVC nanocomposites, Iranian Polymer Journal, 20, 7, 587-596, (2011).
  80. Naderi G., Nekoomanesh M., Mehtarani R., Eslami H., Preparation of a new polypropylene/clay nanocomposites via in sito polymerization, e-Polymes, 16, (2011).
  81. Razavi-Nouri M., Naderi G., Parvin A. and Ghoreishy M. H. R., Thermal Properties and Morphology of Isotactic Polypropylene/Acrylonitrile Butadiene Rubber Blend in the Presence and Absence of Nanoclay, Journal of Applied Polymer Science, 121, 1365-1371, (2011).
  82. Taghizadeh E., Naderi G., Mohammad Razavi-Nouri, Effects of organoclay on the mechanical properties and microstructure of PA6/ECO, Polymer Testing, 30, 327-334, (2011).
  83. Khosrokhavar R., Naderi G, Bakhshadeh G.R., Ghoreishy M.H. R., Microstructure evolution of PP/EPDM/Organoclay nanocomposites in a twin screw extruder, International Polymer Processing, 2, XXVI, (2011).
  84. Naderi G., M. Razavi, E. Taghizadeh, P. Lafleur, C. Dubois, Preparation of Thermoplastic Elastomer Nanocomposites Based on Polyamide-6/polyepichlorohyrin-co-ethylene oxide, Polymer Engineering & Science, 51, 278-284, (2011).
  85. Shokoohi Sh., Arefazar A., Naderi G., Compatibized Polypropylene Ethylene_Propylene_Diene Monomer/Polymide 6 ternary blens: Effect of twin screw extruder processing parameters, Journal of Materials and Design, 3, 32 (2011).  
  86. Baharvand H., Naderi G., Soltani S., Studies on SBR Composites Using N-Isopropyl-N'-Phenyl-P-Phenylenediamine Modified Clay as Reinforcement, Chinese Journal of Polymer Science, 2, (2011).
  87. Alipour A., Naderi G., Bakhshandeh G.R., Vali H., Shokohi Sh., Elastomer nanocomposites based on NR/EPDM/Organoclay: Morphology and Properties, International Polymer Processing, XXVI, (2011).
  88. Esmizadeh E., Naderi G., Ghoreishy M.H.R., Bakhshandeh G.R., Chemical and Properties of Self-crosslinked Poly(Vinyl Chloride) / Nitrile Rubber Nanocomposites Prepared by Melt-Mixing Process, Journal of Polymer Engineering, 2-3, (2011).
  89. Khosrokhavar R., Naderi G., G.R. Bakhshadeh, Ghoreishy M.H. R., Effect of processing parameters on PP/EPDM/Organoclay nanocomposites properties Using Taguchi Analysis Method, , Iranian Polymer Journal, 20, 1, (2011).
  90. Ahmadjo S., Arabi H., Nekomanesh M., Zohuri G., Mortazavi M., Naderi G., Terpolymerization of ethylene/propylene/diene monomer using 2-phlnd-ZrCl metallocene catalysis, Macromolecular Reaction Engineering, 4, 707-714, (2010).
  91. Soltani S., Naderi G., Ghoreishy M.H. R., Second life, Never waste a tire fiber again, Tire Technology International Journal, (2010).
  92. Soltani S., Naderi G., Ghoreishy M.H. R., Mechanical and rheological properties of waste tire fiberreinforced NR/SBR rubber compound, Tire Technology International Journal, (2010).
  93. Taghizadeh E., Naderi G., C. Dubois, Rheological and morphological properties of PA6éECO nanocomposites, Rheologica Acta, 49, 1015-1027, (2010).
  94. Soltani S., Naderi G., Ghoreishy M.H. R., Effect of bonding agent on mechanical and morphological properties of short nylon fiber NR/SBR composites, Iranian Polymer Journal, 19, 11, (2010).
  95. Rajabian M., Naderi G. , P. Carreau, C. Dubois, Flow-Induced particle orientation and rheological properties of suspensions of organoclays in thermoplastic and thermosetting resins, Journal of Polymer Science Part B: Polymer Physics, 48, 2003-1011, (2010).
  96. Rajabian M., Naderi G., Lafleur P. G., and Dubois C, Flow-induced particle orientation and micro structural developments of suspensions of organo-clays in thermoplastic and thermosetting resins in transient elongational and shear flows, Rheologica Acta, 49, 105-118, (2010). 
  97. Soltani S., Naderi G., Ghoreishy M.H. R.,  Mechanical and Rheological Properties of Short-Nylo Fiber, Journal of Rubber Research, 13,2, (2010).
  98. Mahallati P., Arefazar A., Naderi G., Thermoplastic Elastomer Nanocomposite based on PA6/NBR, International Polymer Processing,  XVV,2,  (2010).
  99. Ghoreishy M.H. R., Naderi G., Rafei, M., Development of an advanced computer simulation technique for the modeling of rubber curing process, Computational Material Science, 47, 539-547, (2009).
  100. Rajabian M., Naderi G.,  Lafleur P. G., and Dubois C, Study of particle orientation and transient elongational rheology of nano-scale platelets in viscoelastic fluids; model predictions and experimental observations, e-polymer, 118, (2009). 
  101. Khosrokhavar R., G.R. Bakhshadeh, Ghoreishy M.H. R., Naderi G., PP/EPDM Blends and their Developments up to Nanocomposites, Journal of reinforced plastic and composites, 28, 5, 613-639, (2009).
  102. Rajabian M., Naderi G., Experimental Observations and Quantitative Predictions of Rheological Properties of Organoclay/Poly(propylene) Nanocomposites at the Startup of Shear Flows, Macromolecular Symposia, 274, 116- 122, (2008).
  103. Rajabian M., Naderi G. Lafleur P. G., and Dubois C., Experimental study and modeling of flow behavior and orientation kinetics of layered silicate/polypropylene nanocomposites in start-up of shear flows,  International Polymer Processing,  XXIII, 110-118, (2008).
  104. Naderi G., Lafleur P. G., and Dubois C., The Influence of matrix Viscosity and Composition on the morphology, Rheology, and Mechanical Properties of Thermoplastic Elastomer Nanocomposites based on PP/EPDM, Polymer Composites, 29, 12, (2008).
  105. Naderi G., Lafleur P. G., and Dubois C., Microstructure-properties Correlations in Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers based on PP/EPDM, Polymer Engineering & Science, 47, 207-217, (2007).
  106. Naderi G., Lafleur P. G., and Dubois C., Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers based on PP/EPDM (Rheology & Morphology), International Polymer Processing, 3, 282, (2007).
  107. Ghoreishy, M.H.R. and Naderi G. "Three-Dimensional Finite Element Modeling of Rubber Curing Process," Journal of Elastomers and Plastics, 37, 37-53 (2005).
  108. Ghoreishy, M.H.R. and Naderi G. "Finite element analysis of a thermoplastic elastomer melt flow in the metering region of a single screw extruder" Computational Materials Science, v 34, n 4, December, , p 389-396 (2005).
  109. Ghoreishy, M.H.R. and Naderi G., "Three-Dimensional Finite Element Modelling of Truck Tyre Curing Process in Mould," Iranian Polymer Journal, 14, 735-743 (2005).
  110. Ghoreishy, M.H.R. and Naderi, G., “A New Method for the Determination of the Thermal Conductivity of Rubber Compounds,” Iranian Polymer Journal, 10, 315-320 (2001).
  111. Ghoreishy,M.H.R., Rzavi Nouri, M., and Naderi, G. “ Finite Element Analysis of the Flow of a Thermoplastic Elastomer Melt through an Axisymmeric Die With Slip Boundary Condition,” Plastics, Rubber and Composites, 29, 224-228 (2000).
  112. Naderi G., and Rzavi Nouri M., Study on dynamic vulcanization of NBR/PP blend, Iranian polymer journal, Vol. 8, No. 1, (1999).
 
 
Persian:
 
  1. Esmizade E., Sahraeian R., Esfande M., Naderi G. Nanocomposite based on polyethylene/ perlite and nanoclay, mechanical properties modeling, JSTC, journal of Science and technology of composites, In Press, (2018).
  2. Shokohi Sh., Naderi G., Jalilian H., Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene, JSTC, Journal of Science and Technology of Composites, In Press, (2018).
  3. Paran M., Naderi G., Ghoreishy M., Mechanical properties improvements of O-rings manufacturing for hydraulic systems on the basis of acrylonitrile butadiene rubber through using nanoclays, Applied Research in Chemical-Polymer Engineering, Vol. 1, No.1, Issue No. 1, P 39-48, (2017).
  4. Ronagh M., Mohammadi F., Naderi G.,  Rabiei A., A new approach to mediated surface oxidation of rubbers by silver II ion, Basparesh, 7, 1, 94-101, (2017).
  5. Mostafapour A., Naderi G., Nakhaei M. R., Welding Methods for Joining Polymer Nanocomposites in Automobile Applications, Basparesh, Vol. 7, No. 1, P 3-12, (2017).  
  6. Ghoreishy M.H. R., Naderi G., Rafei M., Study on mechanical properties of rubber-fiber-steel composites using finite element method  and analytical method, Iranian Journal of Polymer Science and Technology, 29, 2, 139-155, (2016).
  7. Ghoreishy M.H.R., Naderi G., Mansour M., Numerical Modeling and Experimental Study of Elastic-Plastic behavior of Carbon Nanotubes Reinforced nanocomposites of PA6/NBR using a Microfinite Element Model, Iranian Journal of Polymer and Science, Vol.27, No.5, 409-421, (2015).
  8. Mirzaei M., Naderi G., Shataheri S.J., Rahimi A., Jahangiri M., Characterization of XNBR-Clay Nanocomposite: a New Material for Protective Gloves, Journal of Occupational Hygiene Engineering, 1, 2, 20-26, (2014).
  9. Ghoreishy M.H.R., Naderi G., Zare M. Computer Simulation and Experimental Study of Deformation in a Radial Tire under Different Static Loads Using Finite Element Method, Iranian Journal of Polymer and Science, Vol. 27, No. 4, 325-336, (2014).
  10. Ghoreishy M.H.R., Naderi G., Steady State Analysis and Prediction of Rolling Resistance for a Moving Radial Tire Using Hyper-Viscoelastic Model, Iranian Journal of Polymer and Science, Vol. 27, No. 3, 231-340, (2014).
  11. Esmizadeh E., Yousefi A.A., Naderi G., Vahidifar A., Epoxy/Layered Silicate Nanocomposites: Factors Influencing Morfology,  Basparesh,Vol. 4, No. 2, 41-50, (2014).
  12. Shokohi Sh, Kharazmkia M., Naderi G., Ghoreishy M.H.R., Effect of nnaoclay on the curing behavior of compounds BR/EPDM used in tire, Iranian Rubber Magazine, No. 70, Vol. 17, (2013).
  13. Bajgholi S., Saadati K., Naderi G., Bohendi H., Heat Resistant Epoxy Resins, Basparesh, 3, 1, 4-11, (2013).
  14. Zoghi S., Naderi G., Bakhshandeh G., Ehsani M., Shokohi S., Elastomer nanocompositees based on BR/Nanoclay and Epoxy-Polyseter hybrid: microstructure and mechanical properties, Iranian Journal of Polymer and Science, 26, 3, 233-242, (2013).
  15. Molavi F., Bagheri R. Naderi G., Soltani s., Effect of compatibilizer on mechanical properties nanocomposite based on Ethylene-Propylene Diene monomer reinforced with MCNT,  Iranian Journal of Polymer and Science, 26, 2, 115-123, (2013).
  16. Ghoreishy M H R, Naderi G., Keshavarz A.,  Optimization of mechanical, dynamical and thermal properties of a high performance tread compound for radial tires,  Iranian Journal of Polymer and Science, 26, 2, 125-138, (2013).
  17. Ghoreishy M H R, Firouzbakht M., Naderi G., Effect of carbon black blends on the mechanical properties of a tread compound for passenger radial tires,  Iranian Journal of Polymer and Science, 26, 1, 45-56, (2013).
  18. Andideh M, Ghoreishy M., Naderi G., Soltani S., Mechanical and morphological properties of waste short nylon fibers and nanoclay reinforced NR/SBR rubber nanocomposites, Iranian Journal of Polymer and Science, 25, 6, (2013).
  19. Nadim E., Azizi M., Naderi G., A review on probable thermal degradation mechanism of polysiloxanes, Basparesh, 2, 3, 25-33, (2013).
  20. Hajibaba A., Masomi M., Naderi G., Pornaghshband A., Morphological Studies of NBR/PVC blends, Basparesh, 3,1, 1-15, (2012).
  21. Naderi G., Shokoohi S., Sadeghi H., Microstructure and Properties of Elastomer Nanocomposites II. Ethylene Propylene Diene Monomer, Basparesh, 2, 1, 13-19, (2012).
  22. Naderi G., Shokoohi S., Sadeghi H., Microstructure and Properties of Elastomer Nanocomposites I. Natural Rubber, Basparesh, 1, 1, 13-20, (2012).
  23. Basiri1 L.,  Bakhshandeh G. R., Naderi G., Shokoohi S., Elastomer Nanocomposites based on organoclay/IIR/EPDM: Microstructure and Mechanical Properties, Iranian Journal of Polymer and Science, 24, 5, 343-353, (2012).
  24. Azizli M. J., Naderi G., Bakhshandeh G. R., Preparation of elastomer nanocomposite based on IIR/CIIR/CR, Iranian Rubber Magazine, 63, 12, (2011).
  25. Shokrzadeh A., Bakhshandeh G. R., Zohorianmehr M., J., Naderi G., Synthesis of Aluminum Triacrylate as reactive filler in EPDM reinforcement, Iranian Journal of Polymer Science and Technology, 24, 3, 195-204, (2011).
  26. Alipour M., Naderi G., Bakhshandeh G. R., Shokohi Sh., Effect of composition and nanofiller content on microstructur and rheological properties of NR/EPDM compound, Iranian Rubber Magazine, 62, 90, (2011).
  27. Ghamgosar V., Bakhshandeh G. R., Salimi A., Naderi G., Study on Nanotube dispersion through polymer matrix and mechanical properties of elastomer composite,  Iranian Rubber Magazine, 62, (2011).
  28. Bagheri M., Ghoreishy M., Naderi G., Soltani S., Study on rubber compound flow in extruder die by finite element method, JACR, 4, 15, (2011).
  29. Razmjouei F., Bakhshandeh G., Naderi G. Taghizadeh E., Preparation of        nanocomposite dynamically vulcanized thermoplastic elastomer based on linear PE and reclaimed rubber, Iranian Rubber Magazine, 15, 59, (2010).
  30. Mohsenian S., Bakhshandeh G.,  Naderi G., Soltani S., Mechanical properties  and cure characteristics of NBR filled with waste  short nylon fiber, Iranian Rubber Magazine, 15, 59, (2010).
  31. Esmizadeh E., Naderi G., Ghoreishy M.H.R., Bakhshandeh G.R., Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites based on NBR/PVC/Nanoclay, Iranian Journal of Polymer Science and Technology, 23, 4, (2010).
  32. Mohsenian, SH., Bakhshandeh G.R., Naderi G., Mechanical and Morphological properties of Short Nylone Fiber Reinforced Acrylonitrile Butadiene Rubber Composites, Iranian Journal of Polymer Science and Technology, 23,3, (2010).
  33. Ghoreishy M.H. R., Rafei M.,  Naderi G., G. Bakhshandeh, Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code, Iranian Journal of Polymer Science and Technology, 23, 2, (2010).
  34. Naderi G., M.H. Beheshty, M. Babmohammadi, Effect of Composition and Type of Phenolic Resin on Mechanical Properties and Morphology of Phenolic Nanocomposites,  Iranian Journal of Polymer Science and Technology, 22, 6, (2010).
  35. Bakhshadeh G.R., Naderi G., Barikani M., Parvin A., Preparation of NR/BR compound using Nano-Zno, Iranian Journal of Polymer Science and Technology, 22, (2), (2009).
  36. M.H.R. Ghoreishy, S.Soltani, and G.Naderi, Studies on Properties of Short Fiber Reinforced Natural Rubber Composites, Iranian Journal of Polymer Science and Technology, 21, (3), 259-267 (2008).
  37. Ghoreishy,M.H.R. and Naderi, G., Three dimentional simulation and development of a computer software for rubber curing process by FEM. Iranian journal of polymer science & technology, Vol. 17, no. 1, P. 21, (2004).
  38. Beheshty MH, Afzali SK and Naderi G., “The Compounding of Phenolic Nitrile Blends: I- Effect of Phenolic Resin”, Iranian Journal of Polymer Science and Technology, 14, (5), 309-315 (2002).
  39. Beheshty MH, Afzali SK and Naderi G., “The Compounding of Phenolic Nitrile Blends: II- Effect of Nitrile Elastomer Type”, Iranian Journal of Polymer Science and Technology, 14, (5), 317-322 (2002).
  40. Beheshty MH, Naderi G, and Delbari H., “Cure Cycle Optimization of a Phenolic – Nitrile foam”, Research, 12, (43), 27-33, (2002).
  41. Naderi G. and Ghoreishy, M.H.R., “Scale-up of Rubber Mixing using Unit Work Method,” Iranian Journal of Polymer Science and Technology, No. 3, (2001).
  42. MH Beheshty, SK Afzaly and Naderi G., The Compounding of Phenolic – Nitrile Blends (The Role of Additives), Journal of Engineering, (16), 15-25 (2000).
    III: International and National Conference Papers:
  1. Esmizadeh E.,  Yousefi A.A., Naderi G., Thermal and morphological properties of epoxy matrix with chemical and physical hybrid of CNTs and nanoclay, International conference on structural nanocomposites, Nanostruc 2014, May 20-21, Madrid, Spain, (2014).
  2. Shokoohi S., Ardestani M., Naderi G., An investigation on the microstructure of CNT-Reinforced PP/PC Nanocomposites, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  3. Irani A., Naderi G., Ghoreshy M.H.R., Effect of multi walled carbon nanotubes on morphological and mechanical properties of PA6/ECO blend,  International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  4. Ghoreshy M.H.R., Naderi G., Mansor M., Micromechanical modeling of mechanical behavior of PA6/NBR/carbon nanotube nanocomposite based on representative volume element, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  5. Nakhaei M.R., Mostafapour A., Naderi G., Effect of nanoclay and process parameters on weld strength and seam width for CO2 laser welding of propylene clay nanocomposite, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  6. Delkash M., Naderi G., Sahraeian R., The effects of nanoclay on mechanical properties of PA6/PC/NBR ternary blend, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  7. Tahmasebi H., Mohammadi F., Rabiee A., Naderi G., Surface modification of EPDM rubber by mediated electrochemical oxidation, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  8. Tahmasebi H., Mohammadi F., Rabiee A., Naderi G., Surface modification of EPDM rubber by mediated electrochemical oxidation using Ce(IV), International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  9. Ghoreshy M.H.R., Naderi G., Roohandeh B., Effect of ozone degradation on hyperelastic properties of a tire sidewall compound, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  10. Ghoreshy M.H.R., Naderi G., Pahlevan M., Themal diffusivity of PP/EPDM/Clay nanocomposites: A new combined experimental numerical method, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  11. Shokoohi S., Naderpoor F., Naderi G., Kalaei M., Rubber toughened polyamide6 nanocomposites: microstructure/ properties correlation, International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  12. Ronagh M., Mohammadi F., Naderi G., Investigation on surface roughness of oxidized natural rubber by mediated electrochemical oxidation using Silver(II), International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  13. Andideh M., Ghoreshy M.H.R., Naderi G., Soltani S., Mechanical and microstructure properties of waste short nylon fibers and nanoclay reinforced NR/SBR rubber nanocomposites,  International Seminar on Polymer Science & Technology, (ISPST), 6-9 October,Tehran, Iran, (2014).
  14. Esmizadeh E.,  Yousefi A.A., Naderi G., Role of Metallic catalyst on the nanostructures synthesized in chemical vapor deposition of methane on nanoclay supports, ICNS5, Kish, Iran, (2014).
  15. Shokoohi S., Arefazar A., Naderi G., Surface Tension Considerations in Copolymer Compatibilized PP/EPDM/PA6 Polymer Blends, IChEC, Kish, Iran, 24-27, (2014).
  16. Ghoreshy M.H.R., Naderi G., Keshavarz A., Firozbakht M.,  Optimization of oil content in tire compound of passenger tire to achieve the most dynamic and thermal properties, 11th National and 2nd International Iran Rubber Industries Expo 2013, 26-28, Feb., Tehran, Iran, (2013). 
  17. Firozbakht M., Ghoreishy M.H. R., Naderi G., Keshavarz A., Effect of different carbon black on hysteresis behavior of tread tire in passenger tire, 11th National and 2nd International Iran Rubber Industries Expo 2013, 26-28, Feb., Tehran, Iran, (2013).
  18. Shokohi S., Kharazmkia M., Naderi G. Ghoreishy M.H. R., Hemati M., ,Effect of Nanoclay on cure behavior of BR/EPDM in Tire compound ,11th National and 2nd International Iran Rubber Industries Expo 2013, 26-28, Feb., Tehran, Iran, (2013).
  19. Molavi F., Bagheri R. Naderi G., Soltani s., Effect of silane compatibilizer on nanocomposite based on EPDM/MWNT, 11th National and 2nd International Iran Rubber Industries Expo 2013, 26-28, Feb., Tehran, Iran, (2013).
  20. Esmizadeh E., Naderi G., Nekomanesh M., Haghighi A., Kalati A., Tamimi S., Preparation of Ethylene Propylene Diene Methylene Rubber (EPDM) Nanocomposite via in situ Ziegler-natta Polymerization, (ICPB5), October 15-18, Aveiro, Portugal, (2012).
  21. Molavi F., Bagheri R. Naderi G., Soltani s., Study on anhydride maleic compatibilizer on EPDM nanocomposite reinforced with nanotube, 14th national seminar of Iranian chemical engineer, 17 -19   October, (2012).
  22. Ghoreishy M. H. R., Naderi  G., Azaerandaz  K., Experimental verification of some results of finite element analysis of a statically loaded tire,  ISPST 2012, 21-25 October, (2012).
  23. Ghoreishy M. H. R., Naderi G., Keshavarz A., Firouzbakht M., An optimization of passenger tire tread compound for achieving the best thermal and dynamical properties, ISPST 2012, 21-25 October, (2012).
  24. Soltani S., Naderi G., Ghoreishy M. H. R., Andideh M., Study on cure characteristics and thermal properties of short nylon fiber/nanoclay reinforced NR/SBR nanocomposites, ISPST 2012, 21-25 October, (2012).
  25. Andideh M., Naderi G., Ghoreishy M. H. R., Soltani S., Effect of Nanoclay and short nylon fiber on the microstructure and mechanical properties of nanocomposites based on NR/SBR, ISPST 2012, 21-25 October, (2012).
  26. Ghoreishy M. H. R., Naderi G., Firouzbakht Mohsen, Keshavarz Ali, Effect of Carbon black blends on the properties of a non-silica tread compound for high performabce radial tires, ISPST 2012, 21-25 October, (2012).
  27. Hajibaba1 A, Naderi G. , and Ghoreishy M., Effect of functionalized and un functional SWNT on morphology and mechanical properties of NBR/PVC, blends, ISPST 2012, 21-25 October, (2012).
  28. Andideh M., Naderi G., Ghoreishy M., Soltani S., Study on mechanical & physical properties of rubber nanocomposite reinforced by nanoclay and short fiber, First national & international  symposium on conveyor belt and tape,  14 Feb, (2012).
  29. Molavi F., Bagheri R. Naderi G., Soltani s., Mechnical properties and cure characterization of nanocomposite based on EPDM reinforced with SWCNT and MWCNT, 2th conference of nano material for defense application, 10- 11 Esfand, (2012).
  30. Andideh M., Naderi G., Ghoreishy M., Soltani S., Rubber Nanocomposite based on NR/SBR reinforced by short fiber and nanoclay, 2th Symposium of Nano Science, Imam Hosein University, Iran, (2012).
  31. Esmizadeh E., Naderi G.,  Ghoreishy M H R, Bakhshandeh G R, Stress- Strain Behavior of NBR/PVC/Clay Nanocomposites: The effect of morphological structure on constitutive models,  PPS 27, May 10-14, Marrakech, Morocco, (2011).
  32. Esmizadeh E., Naderi G.,  Ghoreishy M H R, Bakhshandeh G R, An Investigation on Interactions of Nanoclay Layers and Polymeric Chains Using DMTA and SEM, PPS 27, May 10-14, Marrakech, Morocco, (2011).
  33. Bagheri-Jaghargh M., Ghoreishy M H R, Naderi G., Soltani Sedigheh, Flow simulation of fiber reinforced rubber compounds through Axisymmetric dies in extrusion process, PPS 2011, Kish, Iran (2011).
  34. Ebrahimi Jahromi H R, Bakhshandeh G R, Alipour A,  Naderi G., Ehsani M., Preparation and Properties of NBR nanocomposites containing Montmorilonite, PPS 2011, Kish, Iran (2011).
  35. Haghnegahdar M., Bakhshandeh G R, Naderi G., Razmjooei F., Effect of filler treatment on the properties of SBR compound, PPS 2011, Kish, Iran (2011).    
  36. Razmjooei F., Bakhshandeh R G, Naderi G., Taghizadeh E.,The effect of compatibilizer on mechanical properties and morphology characteristic of TPV nanocomposites based on LLDPE/reclaimed rubber, PPS 2011, Kish, Iran (2011).    
  37. Shokrzadeh A., Bakhshande G R, Zohorianmehr M H, Naderi G., Reinforcement of EPDM elastomer by Aluminum Triacrylate reactive filler, PPS 2011, Kish, Iran (2011).    
  38. Kharazmkia M., Naderi G. Ghoreishy M H R, Enhancement of the properties of BR/EPDM compounds using organoclay, PPS 2011, Kish, Iran (2011). 
  39. Asadollahzadeh A H, Ahmadi S, Jahani Y, Naderi G., In situ polymerization of caprolactam in presence of NBR toward super tough PA6/NBR nano alloy, PPS 2011, Kish, Iran (2011). 
  40. Razmjooei F., Bakhshandeh R G, Naderi G., Taghizadeh E., Influence of increasing rubber concentration on mechanical and X-ray diffraction characteristics of dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/reclaimed rubber, PPS 2011, Kish, Iran (2011).  
  41. Hajibaba A, Naderi G., Ghoreishy M H R, Bakhshandeh G R, Razavi M, Effect of single walled carbon nanotube on mechanical and morphological properties of dynamically vulcanized thermoplastic elastomer based on NBR/PVC, PPS 2011, Kish, Iran (2011).
  42. Gharmgosar V., Bakhshandeh G. R., Salimi A., Naderi G., A comparison in dispersion of carbon nanotube in aques media, EPF, European Polymer Congress, June 26- July 1, Spain, (2011).
  43. Gharmgosar V., Bakhshandeh G. R., Salimi A., Naderi G., Effect of sodium dodecylebenzene sulfonate on carbon nanotube dispersion, EPF, European Polymer Congress, June 26- July 1, Spain, (2011).
  44. Shokohi S., Arefazar A., Naderi G., Preparation of Polymer blend Nanocomposites based on PP/EPDM/EPDM-g- MA/PA6, APME, 210, Turkey, (2011).    
  45. Arezomand, Naderi G., Shokohi S., Preparation of Polymer Nanocomposites based on PP/PC/ Cloisite 15 A, APME, 209, Turkey, (2011).    
  46. Khosrokhaver R., Naderi G., Bakhshandeh G. R., Ghoreishy M. H. R., Dynamically Vulcanized PP?EPDM/Organoclay: Effect of Mixing Sequence, APME, 208, Turkey, (2011).     
  47. Toloei S., Naderi G., Soltani S., Study on Mechanical and Morphological Properties of Nanocomposites based on NBR/BR/Nanoclay,  APME, 207, Turkey, (2011).
  48. Mohseniyan SH., Soltani S., Naderi G., Bakhshandeh G.R., Mechanical, Morphological and Rheological Properties of short Nylon fiber Rreinforced acrylonitrile- Butadiene Rubber compound, APME, 98, Turkey, (2011).   
  49. Toloei, S., Naderi G. , Mortezaei M., Microstructure and Mechanical Properties of Nanocomposites based on NBR/BR, 10 th student meeting on nanotechnology,26 Ordibehesht, (2011).   
  50. Ebrahimi H.R., Bakhshandeh G.R., Ehsani M., Naderi G., Preparation and investigation mechanical properties of nanocomposites based on NBR/Nanoclay, 8th student meeting on nanotechnology, 10, 11 Azar, Mashhad, (2010).
  51. Zarei M., Bakhshandeh G.R., Naderi G., Investigation of elastomer nanocomposites based on NR/BR/SBR with nanoclay, 8th student meeting on nanotechnology, 10, 11 Azar, Mashhad, (2010).  
  52. J. Azizli, G. Bakhshandeh, Naderi G, Preparation of elastomer based on CIIR/IIR/CR and nanoclay, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  53. Bagheri M., Ghoreishy M., Naderi G., Soltani Sedigheh, Design and development of computer software on simulation of rubber compound in extruder die, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  54. Alipour M., Naderi G., Bakhshandeh G., Ghoreishy M., Reinforcing mechanical properties of rubber compounding based on NR/EPDM using modified nanoclay 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  55. Azizli J., Bakhshandeh G., Naderi G., Alipour M., Preparation and investigation of nanocomposite based on IIR/CR and modified nanoclay, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  56. Aboulfathi A., Bakhshandeh G., Naderi G., Effect of mixing sequence on mechanical properties of NR/BR/Nanoclay, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  57. Shokrzadeh A., Baghshandeh G., Zohorian M., Naderi G., Effect of active aluminum acrilate on mechanical properties of EPDM matrix, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  58. Ebrahimi H., Bakhshandeh G., Ehsani M., Naderi G., Alipour M., Effect of two types of filler on cure characteristic and mechanical properties of NBR rubber compound, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  59. Basiri L., Bakhshandeh G., Naderi G., Preparation and investigation of  elastomer nanocomposite based on IIR/EPDM/Organoclay, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  60. Zoghi S., Bakhshandeh G., Naderi G., Ehsani M. Improvement of mechanical properties and morphology of BR elastomer by Nanoclay and waste paint powder, 10 th Iran Rubber Industries Conference & Expo, Tehran, Iran, (2010).
  61. A. Alipour, Naderi G., G. Bakhshandeh, Dynamic Mechanical: Rheological and Morphological Properties of Nanocomposites based on NR/EPDM, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  62. M. Ersali, N. Fazeli, Naderi G., Measuring the effect of orgaclay on Morphology and Properties of EPDM/NBR Compound, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  63. M. Zarei, Naderi G., G. Bakhshandeh, Preparation and Evaluation of the microstructure and mechanical properties of Tire Treads (NR/BR/SBR) With Nanoclay, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  64. M. Durandish, Naderi G., G. Bakhshandeh, A. Alipour, An Investigation Microstructure, Morphological and Dynamic Mechanical Properties of Nanocomposite based on SBR/EPDM/Organo Montmorinite, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  65. E. Esmizadeh, Naderi G., M.H. Ghoreishy, G. Bakhshandeh, M. Bagheri, Rheologycal Properties of MBR/PVC Nanocomposites studied by Torque Rheometer, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  66. S. Zoghi, G. Bakhshandeh, Naderi G., M. Ehsani, Polymer Nanocomposites based on Butadiene rubber/powder coating waste/nanoclay, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  67. M. Haghnegahdar, G. Bakhshandeh, Naderi G., A. Alipour, Effect of Powder Coating Waste and Nanoclay on Styrene Butadiene Rubber Properties, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  68. H.R. Ebrahimi, G. Bakhshandeh, M. Ehsani, Naderi G., A. Alipour, Preparation and Properties of Nanoclay and Powder Coating Waste in NBR Compound, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  69. Sh. Shokoohi, A. Arefazar, Naderi G., Nanocomposites based on compatibilized ternary blends of PP/EPDM/PA6, International Congress on Nanoscience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).
  70. Shokohi S., Arefazar A., Naderi G., Effect of compatibilizer on the microstructure of PP/EPDM/PA6 Ternary polymer blends, ASPM 2010, 8-10 Austria, (2010).   
  71. Azizli J., Bakhshandeh G., Naderi G., Shokohi S., Preparation of nanocomposites based on IIR/Cr : (Microstructure & Mechanical Properties), ASPM 2010, 8-10 Austria, (2010).  
  72. Haghnegahdar M., Bakhshandeh G., Naderi G., Shokohi S., Effect of powder coating waste and nanoclay on styrene butadiene rubber nanocomposites, ASPM 2010, 8-10 Austria, (2010).  
  73. Zoghi S., Bakhshandeh G., Naderi G., Ehsani M., Shokohi S., Polymer Nanocomposites Based on Butadiene Rubber/Powder coating waste/nanoclay, ASPM 2010, 8-10 Austria, (2010).  
  74. Shokohi S., Arefazar A., Naderi G., Determination of twin screw extruder operational conditions for PP/EPDM/PA6 ternary blends, ASPM 2010, 8-10 Austria, (2010). 
  75. Esmizadeh E., Naderi G., Ghoreishy M.H.R., Bakhshandeh, G. R., Rheological properties of NBR/PVC nanocomposites studied by torque rheometry, International Congress on Nanosience and Nanotechnology, 9-11 November, Shiraz, Iran, (2010).  
  76. Ersali M., Fazeli  N., Naderi G., Fabrication and physical properties of EPDM/NBR/organoclay Nanocomposites, 6th Nanoscience and Nanotechnology Conference,  15 – 18 June, Izmir, Turkey, (2010).
  77. Rafei M., Ghoreishy M H R, Naderi G., A comprehensive kinetics study and simulation of vulcanization process for a rubber-clay nanocomposite as a thick rubber article, PPS 26, Canada, (2010).
  78. Ersali M., Fazeli N., Naderi G., Effect of Nano-clay o cure characteristics and mechanical properties of EPDM/NBR lends, PPS 26, Canada, (2010).
  79. Zarei Ma, Naderi G., Ghoreshy M R, Bakhshandeh G, An Investigation on the Modeling of Mechanical Behavior of a Triple Blend of NR/BR/SBR Nanocomposite by Different Hyperelastic Equations, PPS 26, Canada, (2010).
  80. Fasaei Mohammad Reza, Naderi G., Bakhshandeh G R , Ahmadi S, Mechanical, thermal behavior and Morphological Properties of Thermoplastic Elastomers based on Reclaimed Rubber/HDPE, PPS 26, Canada, (2010).
  81. Esmizadeh E, Naderi G., Ghoreishy M H R, Bakhshandeh G, An Investigation on the Effect of Processing Conditions on Crosslinking of Poly(vinyle chloride) and Acrylonitrile Butadiene Rubber,  PPS 26, Canada, (2010).
  82. Mohsenian S, Naderi G., Bakhshandeh G R, Soltani S, Mechanical and Morphological Properties of Waste Short Nylon Fiber-Reinforced Nitrile Rubber Composites, PPS 26, Canada, (2010).
  83. Khosrokhavar R, Naderi G., Bakhshandeh G R, Ghoreishy Mir H R, Effect of processing parameters on PP/EPDM/Organoclay nanocomposites using experimental design, PPS 26, Canada, (2010).
  84. Naderi G., Dorandish M, Bakhshandeh G R, An Investigation on the Microstructure and Mechanical Properties of Nanocomposites Based on SBR/EPDM, PPS 26, Canada, (2010).
  85. Shokrzadeh A., Bakhshandeh G. R., Zohurianmehr M. Naderi G., Synthesizing of Aluminum Carboxylate as a Reactive Filler for Reinforcing of Elastomers, PPS 26, Canada, (2010).
  86. Alipour A, Naderi G., Ghoreishy M H R, Bakhshandeh G, Shokohi S, Validation of Hyperelastic Model Predictions for NR/EPDM Nanocomposites, PPS 26, Canada, (2010).
  87. Shokoohi S., Arefazar A., Naderi G., Effect of Processing Conditions on the Formation of PP/EPDM/PA6 Ternary Blends in a Twin Screw Extruder, PPS 26, Canada, (2010).
  88. Alizadeh B, Arefazar A, Naderi G., Shokoohi S, Investigation of morphology and Mechanical properties of nanocomposite based on Polyamide6/PolyCarbonate, PPS 26, Canada, (2010).
  89. Basiri L, Naderi G., Bakhshandeh G R, Taghizadeh E, Preparation of nanocomposites based on isobutylene–isoprene /ethylene propylene diene monomer (IIR/EPDM) /Organo clay, PPS 26, Canada, (2010).
  90. Azizly J, Naderi G., Bakhshandeh G R, Taghizadeh E, Preparation and mechanical properties of isobutylene-isoprene / chloroprene (IIR/CR) /clay nanocomposites, PPS 26, Canada, (2010).
  91. Taghizadeh E, Naderi G.,, Razavi N M, Linear Rheological Properties of Polyamide/Rubber Nanocomposites: Effect of Rubber Concentration, PPS 26, Canada, (2010).
  92. Alipour M., Naderi G., M.H.R.Ghoreishy, G.Bakhshande, An investigation on the microstructure and mechanical properties of nanocomposites based on NR/EPDM, NS 2010, Kish, (2010). 
  93. Esmizadeh E.,  Naderi G., M.H.R.Ghoreishy, G.Bakhshande, Effect of processing condition of melt mixing in properties of PVC/NBR Nanocomposite, NS 2010, Kish, (2010). 
  94. Mohammadi F., Naderi G., N. Shojai, S. Soltani, Development of Artificial Neural Network models for Prediction of Mechanical Properties of Short fiber Reinforced NR-NBR Composite, ISPST, Iran, (2009).
  95. Fasaei, Naderi G., G.R. Bakhshandeh, Preparation of Reclaim/ HDPE TPE, ISPST, Iran, (2009).
  96. M. Zarei, Naderi G., G.R. Bakhshandeh, Preparation of NR/SBR/BR Nanocomposite, ISPST, Iran, (2009).
  97. R. Khosrokhaver, Naderi G. G.R. Bakhshandeh, Ghoraishy MH, Preparation of Nanocomposites based on EPDM/PP using twin screw extruder, ISPST, Iran, (2009).
  98. M. Rafeei, Ghoraishy MH, Naderi G., Advanced Computer Simulation of Rubber Curing Process, ISPST, Iran, (2009).
  99. Soltani S., Naderi G., Ghoraishy MH., Rheological properties of short fiber NR/SBR composites, ISPST, Iran, (2009).
  100. Mahalati M., Arefazar, A., Naderi G., Preparation of Nanocomposites based on NBR/PA6, ISPST, Iran, (2009).
  101. E. Taghizade, G.Naderi, M. Razavi Nouri, Preparation of Nanocomposites Based on ECO/PA6, the 5Th Nanotechnology student's conference, Kish, (2009).
  102. Naderi G., M. H. Beheshty, B. Babamohamadi, Effect of Matrix Viscosity on Microstructure of Nanocomposites based on Phenolic resin, PPS-25, India, (2009).
  103. Naderi G., M. H. Beheshty, B. Jamshidi, Effect of Processing Condition on Microstructure of nanocomposites based on Phenolic Resin, PPS-25, India, (2009).
  104. M. Razavi Nouri, Naderi G., A. Parvin, M.H.R. Ghoraishy, Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on NBR/PP, PPS-25, India, (2009).
  105. Naderi G., Ghoreishy M.H.R., S.Soltani,  Rheological and Morphological Properties of Short Nylon Fiber NR/SBR Composite, IRC, Malaysia, (2008).
  106. Ghoreishy  M.H.R., S.Soltani,  Naderi G., Study on short fiber nylon-6 NR/SBR Composites, IRC, Malaysia, (2008).
  107. Naderi G., Parvin A., Preparation of NR/SBR Nanocomposites Using NanoZno, Rubber National Conference, Kish, (2008). 
  108. Naderi G., Bakhshandeh G.R., Preparation of NR/BR nanocomposites, Rubber National Conference, Kish, (2008). 
  109. G. Naderi and Hedayat Sadeghi Ghari, The Effects of Nano-Silicate Layers on the morphology and mechanical properties of rubber nanocomposites, CCFA, Kish, (2008).       
  110. Taghizadeh E., Naderi G., Razavi Nouri M., Nanocomposite Thermoplastic elastomeres Based on ECO/PA6 (Rheology & Morphology), CCFA, Kish, (2008).
  111. R.. Mehtarani, M. Nekhomanesh, G. Naderi, Preparation of polypropylene/clay nanocomposites via in situ polymerization, CCFA, Kish, (2008).
  112. Naderi G., Taghizadeh E., Razavi Nouri M, Preparation of Nanocomposite Thermoplastic Elastomer Based on ECO/PA6, PPS-24, Salerno Italy, (2008).
  113. Ashjar M., Naderi G., Mahdavian M., Study on Rheological Properties of Steyene Butyl Acrilate Latex Containing Magnetite Nanoparticles,  PPS-24, Salerno Italy, (2008).    
  114. Naderi G., Rajabian M., Lafleur P. G., and Dubois C., The effect of matrix viscosity on rheological and morphological properties of uncured thermoplastic elastomer nanocomposite based on EPDM/PP, ISPST, Iran, (2007).
  115. Naderi G., Rajabian M., Lafleur P. G., and Dubois C., Experimental study and theoretical modeling of flow behavior and orientation kinetics of layered silicate/polypropylene nanocomposites in shear and elongational flow, ISPST, Iran, (2007).
  116. Naderi G., Lafleur P. G., and Dubois C., Influence of molecular weight of PPMA on microstructure and viscoelastic properties of TPEs nanocomposites, AERC, Hersonisos, Crete, Greece, (2006).
  117. Naderi G., Lafleur P. G., and Dubois C., Effect of maleic anhydride polypropylene on rheological and morphological properties of dynamically vulcanized thermoplastic elastomer nanocomposites (TPV nanocomposites) based on PP/EPDM, PPS, Japan, (2006).
  118. Naderi G., Lafleur P. G., and Dubois C., Preparation of TPE nanocomposites using different PPMA as compatibilizer agent, PPS, Japan, (2006).
  119. Naderi G., Lafleur P. G., and Dubois C., Rheology of uncured thermoplastic elastomer Nanocomposites based on EPDM/PP, CREPEC, Montreal, (2006).
  120. Naderi G., Lafleur P. G., and Dubois C., Thermoplastic   elastomer nanocomposites based on dynamically vulcanized PP/EPDM Microstructure and Mechanical properties, ANTEC, Boston, USA, 3587, (2005).
  121. Naderi G., Lafleur P. G., and Dubois C., Rheology-Morphology Relationships in Dynamically vulcanized Thermoplastic Elastomer Nanocomposites & TPE Based on PP/EPDM, GFR, 21-24, France (2005).
  122. Naderi G., Lafleur P. G., and Dubois C., Rheological Properties of Nanocomposites based on Polypropylene, ISPST, Tehran, (2005). 
  123. Naderi G., Lafleur P. G., and Dubois C., Rheological and Morphological Properties of TPE Nanocomposites (Effect of Curing System), PPS, Quebec, Canada, (2005). 
  124. Ghoreishy, M.H.R. and Naderi G., "A Three Dimensional Finite Element Model for Rubber Curing Process, ISPST 2003, 12-15 May, Tehran, Iran (2003).
  125. Beheshty MH, Afzali SK and Naderi G., “Effect of Additives Resin on the Properties of Nitril Elastomers”, The Proceedings of Fifth National Conference of Rubber, 20-21 Feb., 136-143 (2002).
  126. Bakhshandeh, G.R., Naderi, G., Karabi, M., Azangoo, K.,” Formulation design for rubber-Metal Shock absorber Sandwiches used in anti-earthquake building”, Fourth Rubber Technology Conference, Feb. 21-22, Yazd, Iran (2001).
  127. Beheshty MH, Afzali SK and Naderi G., “Effect of Phenolic Resin on the Properties of Nitril Elastomers”, The Proceedings of Fourth National Conference of Rubber, 20-21 Feb., 131-137 (2001).
  128. Beheshty MH, Naderi G. and Afzali SK, “Effect of Phenolic Resin on the Thermal Behaviour of Nitril Elastomer”, The proceedings of PPS-2001, October 22-24, Antalya, Turkey, P. 335 (2001).
  129. Karabi, M., Ghoreishy,M.H.R. and Naderi, G., “ Study of the Flow of a Tire Tread Compound in a Laboratory-Scale Extruder using COSMOS/M, (Part one)” Fifth Seminar on Polymer Science and Technology, 12-14 September, Tehran, Iran (2000).
  130. Naderi, G., A. Katbab, H. Nazokdast, “Study of thermoplastic elastomer based of dynamically vulcanized NBR/PU.” Fifth International Seminar on Rubber and Tire, Tehran, Iran (1997).
 
 9- Patents:
 
  1. Iran Patent, NO: 31017
  2. Naderi G., Karrabi M., Abassi F., "Production of two layer hose based on ECO/CR reinforced with polyamide fiber"; 2004.
  3. Iran Patent, NO: 50485
  4. Naderi G., Taghizadeh E., Razavi M., “Preparation of nanocomposite thermoplastic elastomer based on PA6/ECO”: 2008.
  5. Iran Patent, NO: 53379
  6. Naderi G., Razavi M., Parvin A., Ghoreishy M.H., “Preparation of thermoplastic elastomer nanocomposite based on PP/NBR”, 2008. 
  7. Iran Patent, NO: 54996
  8. Nekoomanesh M., Naderi G., Mehtarani R., “In-situ polymerization of PP/Nanoclay using TiCl4/MgCl2/Nanoclay/Phethalate-AlEt3 Alkoxysilane”, 2008. 
  9. Iran Patent, NO: 58105
  10. Arefazar A., Naderi G., Mahallati P., “Preparation of TPE nanocomposite based on PA6/NBR”, 2009.
  11. Iran Patent, NO: 61689
  12. Naderi G., Bakhshandeh G.R., Zarei M., “Preparation of NR/BR/SBR nanocomposite with Nanoclay”, 2009.
  13.  Iran Patent, NO: 61725
  14. Naderi G., bakhshandeh G.R., Alipour M., “Preparation of Elastomer Nanocomposite based on NR/EPDM”, 2009.
  15. Iran Patent, NO: 62717
  16. Naderi G., Ahmadi S., Bakhshandeh G. R., Fasaei M., “Preparation of Reclaim rubber/ HDPE thermoplastic Elastomer using deferent method of compatibilizing”, 2009.
  17. Iran Patent, NO: 62658
  18. Naderi G., Ghoreishy M.H.R., Bakhshandeh G. R., Esmizadeh E., “Preparation of nanocomposite thermoplastic elastomer based on NBR/PVC(30/70) and selecting optimum mixing condition”, 2009. 
  19. Iran Patent, NO: 62867
  20. Naderi G., Bakhshandeh G. R., Basiri L., “Preparation of IIP/EPDM elastomer nanocomposite with nanocly”, 2009.
  21. Iran Patent, NO: 62923
  22. Soltani S., Naderi G., Ghoreishy M. H. R., “Preparation of NR/SBR Composite with waste short fiber”, 2009.
  23. Iran Patent, NO: 63212
  24. Naderi G., Bakhshandeh G. R., Dorandish M., “Preparation of Nanocomposite based on SBR/EPDM”, 2009.
  25. Iran Patent, NO: 63306
  26. Naderi G., Bakhshandeh G. R., Azizli J., “Preparation of Elastomer Nanocomposite based on IIR/CR”, 2009.
  27. Iran Patent, NO: 63813
  28. Naderi G., Ersali M., Fazeli N., “Preparation of Elastomer Nanocomposite based on EPDM/NBR”, 2009.
  29. Iran Patent, NO: 64976
  30. Ghoreishy M. H. R., Naderi G., Rafei M., “Determining heat conduction constant of elastomer compound using heat history experiment with thermocouple and ABAQUS software”, 2010.
  31. Iran Patent, NO: 64820
  32. Naderi G., Bakhshandeh G. R., Azizli J.,”Preparation of Butyl rubber nanocomposite with sulfour-metal curing agent”, 2010.
  33. Iran Patent, NO: 65110
  34. Naderi G., Bakhshandeh G. R., Azizli J., “Preparation of IIR/CR blend compound”, 2010.
  35. Iran Patent, NO: 65812
  36. Arefazar A., Naderi G., Alizadeh B., “Preparation of PA6/PC Nanocomposite using Nanoclay”, 2010.
  37. Iran Patent, NO: 65895
  38. Naderi G., Bakhshandeh G. R., Razmjouei F., “Preparation of dynamically vulcanized nanocomposite based on Reclaim rubber/PE”, 2010.
  39. Iran Patent, NO: 66346
  40. Naderi G., Baharvand H., Soltani S., Preparation of SBR Nanocomposite with modified antioxidant and nanoclay, 2010.
  41. Iran Patent, NO: 66052
  42.       Naderi G., Bakhshandeh G. R., Haghnegahdar M., “Preparation of SBR elastomer
           nanocomposite usinf waste power coating”, 2010.
  43. Iran Patent, NO: 69525
  44. Naderi G., Ghoreishy M. H. R., Kharazmkia M., “Preparation of Nanocomposite based on EPDM/BR/Nanoclay”, 2011.
  45. Iran Patent, NO: 70821
  46. Naderi G., Barmar M., “Production of the gas cable diaphragm”, 2011.
  47. Iran Patent, NO: 71108
  48. Naderi G., Ghoreishy M. H. R., Bakhshandeh G.R., Razavi M., Hajibaba A., “Preparation of Nanocomposite based on NBR/PVC/single-wall nanotube”, 2011.
  49. Iran Patent, NO: 75987
  50. Naderi G., Ghoreishy M. H. R., Soltani S., Andideh M., “Nanocomposite based on NR/waste short fiber and nanosilicate layer” 2012.
  51. Iran Patent, NO: 83665
  52. Esmizadeh E., Naderi G., Yousefi A.A., “Production of Nano-material hybrid with Nano tube and annoclay”, 2014.
 
 
 10- Supervising M.Sc. & Ph.D. Research Projects:
 
  •  Ph.D. Students:
 
  1. Khosrokhavar Ramin, “Study on Mechanical and Morphological properties of Themoplastic Elastomer Nanocomposite based on PP/EPDM prepared with twin screw extruder”, Dissertation, Iran Polymer & Petrochemical Institute, 2010.
  2.  Shokoohi Shirin, “Effect of twin screw extruder processing parameters on compatibized Polypropylene Ethylene_Propylene_Diene Monomer/Polymide 6 ternary blens”, Dissertation, Amir Kabir University, 2011.
  3. Mirzaei Mohammad, “Study on Mechanical and barrier properties of XNBR-Clay Nanocomposite: as a promising material for protective gloves”, Dissertation, Tehran University, 2012.
  4. Alimi Mazdak, “Study on effect of Inulin Formulation on the Microstructure and Viscoelastic Properties of Low-fat Mayonnaise containing Modified Starch”, Dissertation, Azad University, 2013.
  5. Esmizadeh Elnaz, Study on mechanical and morphological properties of epoxy resin prepared with nanotube/nanoclay, Dissertation, Iran Polymer & Petrochemical Institute, 2015.
  6. Rafei Mehdi, Modeling of tire tread (rolling resistant), IPPI, Ph.D. student.
  7. Paran Mohammad reza, Preparation of PA6/NBR/HNT Nanocomposite, IPPI, Ph.D. student.
  8. Haghnegahdar Masoud, Study on morphology of PP/EPDM/Graphene  Nanocomposite, IPPI, Ph.D. student.
  9. Ronagh baghban Mohammad, Surface modification of NR/BR compound using electrochemical electrolysis, IPPI, Ph.D. student
  10. Nakhaei Mohammad reza, Preparation of PP/EPDM nanocomposite by FSP method, Esfahan University, Ph.D. student.
  11. Faridirad Farzaneh, Polymerization of Polyamide/CNT nanoparticles nanocomposites using reactive mixing, IPPI, Ph.D. student.
  12. Davodi M.  
 
  • Postdoc:
  1. Shemshadi Resol
  2. Paran Mohammad reza
  3. Nakhaei Mohammad Reza
 M.Sc. Students:
 Afzali Kamal, Design of phenolic-nitrile compounds as heat insulator, Iran Polymer & Petrochemical Institute, 2001.
  1. Delbari hadi, "Curing optimization of thermosetting composite process", Iran Polymer & Petrochemical Institute and University of Mazandaran, 2001.
  2. Taghizadeh Ehsan., “Investigation of Mechanical Properties of nanocomposite thermoplastic elastomer based on PA6/ECO”, Iran Polymer & Petrochemical Institute, 2008.
  3. Jamshidi parvi, "Curing optimization of phenolic resin", Azad University, 2008.
  4. Babamohammadi Mohamamd, "Curing optimization of phenolic-nitrile compounds ", Azad University, 2008.
  5. Mahallati Paridokht., “Study Mechanical Properties of TPE nanocomposite based on PA6/NBR” Azad University, 2009.
  6. Rafei Mehdi., “Determining heat conduction constant of elastomer compound using heat history experiment with thermocouple and ABAQUS software”, Iran Polymer & Petrochemical Institute, 2009.
  7. Fasaei Mohammad, “Study Preparation of Reclaim rubber/ HDPE thermoplastic Elastomer using deferent method of compatibilizing”, Azad University, 2009.
  8. Setayesh sepideh,Study of phenolic adhesives and optimization of their properties, Azad University, 2009.
  9. Zarei Mansour., “Study on Mechanical Properties of NR/BR/SBR nanocomposite with Nanoclay”, Azad University, 2009.
  10. Alipour Majid., “Study Preparation of Elastomer Nanocomposite based on NR/EPDM”, Azad University, 2009.
  11. Esmizadeh Elnaz, “Study on Microstruture of nanocomposite thermoplastic elastomer based on NBR/PVC(30/70) and selecting optimum mixing condition”, Iran Polymer & Petrochemical Institute, 2009.
  12. Basiri Laleh, “Study Mechanical Properties of IIP/EPDM elastomer nanocomposite with nanocly”, Azad University, 2009.
  13. Dorandish Masoud., “Study Morphological Properties of Nanocomposite based on SBR/EPDM”, Azad University, 2009.
  14. Azizli Javad, “Investigation Rheological and Mechanical Properties of Elastomer Nanocomposite based on IIR/CR”, Azad University, 2009.
  15. Ersali Mohammad, “Study Mechanical Properties of Elastomer Nanocomposite based on EPDM/NBR”, Azad University, 2009.
  16. Alizadeh Bahareh, “Investigation Mechanical and Morphological Properties of PA6/PC Nanocomposite using Nanoclay”, Azad University, 2010.
  17. Razmjouei Fatemeh, “Study on Preparation of dynamically vulcanized nanocomposite based on Reclaim rubber/PE”, Azad University, 2010.
  18. Haghnegahdar Masoud, “Study on Preparation of SBR elastomer nanocomposite using waste power coating”, Azad University, 2010.
  19. Ebrahimi Masod, Study on Preparation of NBR elastomer nanocomposite using waste power coating”, Azad University, 2010.
  20. Zoghi sepideh, “……
  21. Bagheri Mojtaba,”…..
  22. Kharazmkia Mohammad, “Study Mechanical Properties of Nanocomposite based on EPDM/BR/Nanoclay”, Azad University, 2011.
  23. Andideh Mohammad, “Study on Mechanical and Morphological Properties of Nanocomposite based on NR/waste short fiber and nanosilicate layer”, Iran Polymer & Petrochemical Institute, 2011.
  24. Hajibaba Armin, Effect of Single Wall Carbon Nanotube on Morphology and Mechanical Properties of NBR/PVC blends, Iran Polymer & Petrochemical Institute, 2012.
  25. Toloei Shohreh,”….
  26. Nakhaei Mohamad reza, “……..
  27. Karami Mahmod, “….
  28. Ghamgosar  
  29. Shokrzadeh Akram, Improvement of the mechanical properties of carbon black-filled EPDM using a metallic acrylate salt as filler, Iran Polymer & Petrochemical Institute, 2012.
  30. Firouzbakht Mohammad, Effect of carbon black blends on the mechanical properties of a tread compound for passenger radial tires, Iran Polymer & Petrochemical Institute, 2013.
  31. Asadollahazdeh Asghar, Super tough PA6/NBR nano alloy through in-situ polymerization of Ε-caprolactam in the presence of NBR nano-phase, Iran Polymer & Petrochemical Institute, 2013.
  32. Mohseniyan Masoumeh, Mechanical, Morphological and Rheological Properties of short nylon fiber reinforced acrcylonitrile butadiene rubber composites, Azad University, 2013.
  33. Moradi Mojtaba., Effect of Modified Single-Wall Carbon Nanotubes on Mechanical and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on Polyamide 6/Acrylonitrile Butadiene Rubber, Iran Polymer & Petrochemical Institute, 2014.
  34. Zare Mojtaba. Computer Simulation and Experimental Study of Deformation in a Radial Tire under Different Static Loads Using Finite Element Method, Iran Polymer & Petrochemical Institute, 2014.
  35. Keshavarz Ali
  36. Molavi Fatemeh, “…..
  37. Mansour Masod, “…..
  38. Ahmadi
  39. Tahmasebi 
  40. Forozandeh
  41. Irani
  42. Delkash Masoumeh
  43. Javid shahrestani
  44. Pahlava Mojtaba
  45. Rohandeh
  46. Ardestan
  47. Meghdad
  48. Naderpour Nader
  49. Babakhani Mohsen
  50. Yousefi Naeimeh
  51. Jahed Mohsen
  52. Mohammadi shohreh
  53. Javadi
  54. Razmjouei
  55. Hoseini Sahar
  56. Rasouli mohammad
  57. Jalilian
  58. Elahi Maryam
  59. Asgarzadeh Zohreh
  60. Arjmandpor
  61. Abdolhamid
  62. Sadeghi Taha
  63. Heidar Ali
  64. Samaei
  65. Rashidi
  66. Bakhtiyari
  67. Ghaderzadeh
  68. Mirzaei