CURRICULUM VITAE Mohammad Razavi-Nouri (B.Sc., M.Sc., Ph.D.) Associate Professor
Personal Information Name: Mohammad Surname: Razavi-Nouri Date of Birth: June 6, 1966 Address: Iran Polymer and Petrochemical Institute P.O.Box 14965-115 Fax: +98 21 44787021-23 Tel: +98 21 48662417
Educations Ph.D. in Polymer Engineering (2002) Metallurgy and Materials, School of Engineering, University of Birmingham, Birmingham, UK. Thesis: The Thermal and Mechanical Properties of Polypropylene, Metallocene Polyethylenes and Their Blends.
M.Sc. in Polymer Engineering (1993) Faculty of Engineering, University of Tehran, Tehran, Iran. Thesis: An Investigation on Polymer Fibres Substitution for Asbestos in Cementitious Composites.
B.Sc. in Chemical Engineering (1989) Chemical Engineering Department, AmirKabir University of Technology, Tehran, Iran. Thesis: Emulsion Polymerization of Acrylics Resins for Paint industry.
Diploma in Mathematics and Physics (1984) Shahid Beheshti High School, Rasht, Iran.
Working Experiences
Publications and Presentations a) Publications in English 1. Razavi-Nouri, M., Sabet, A. and Mohebbi M., "The Gel Content Effect on Rheological and Physical Properties of Cured Acrylonitrile-Butadiene Rubber/Poly(Ethylene-Co-Vinyl Acetate)/Organo-Montmorillonite Nanocomposites", Iranian Polymer Journal, 30, 965-974 (2021). 2. Razavi-Nouri, M., Sabet, A. and Mohebbi M., "The Impact of Organo-Montmorillonite on Rheology and Crystalline Structure of Uncured and Cured Acrylonitrile-Butadiene Rubber/Poly(Ethylene-Co-Vinyl Acetate) Nanocomposites", Polymer Composites, 42, 3184-3194 (2021). 3. Razavi-Nouri, M., Saeedi, F. and Ziaee F., "Rheological Behavior, Electrical Conductivity and Morphology of Multi-walled Carbon Nanotube Filled Poly(Ethylene-Co-Vinyl Acetate)/Poly(Methyl Methacrylate) Nanocomposites: Effect of Nanofiller Content", Polymer Composites, 42, 2242-2251 (2021). 4. Razavi-Nouri, M., Rezadoust, A.M., Soheilpour, Z., Garoosi K. and Ghaffarian, S.R., "Morphology and Mechanical Properties of Poly(Acrylonitrile-Butadiene-Styrene)/Multi-Walled Carbon Nanotubes Nanocomposite Specimens Prepared by Fused Deposition Modeling", Polymer Composites, 42, 342-352 (2021). 5. Razavi-Nouri, M., Sabet, A. and Mohebbi M., "Effect of Organoclay Content on Mechanical and Rheological Properties of Dynamically Cross-linked Acrylonitrile-Butadiene Rubber/Poly(Ethylene-Co-Vinyl Acetate)/Organoclay Nanocomposites", Polymer Bulletin, 77, 5933-5952 (2020). 6. Razavi-Nouri, M., Sabet, A. and Mohebbi M., "Thermal, Tensile and Rheological Properties of Dynamically Cross-linked Organoclay Filled Poly(Ethylene-Co-Vinyl Acetate)/Acrylonitrile-Butadiene Rubber Nanocomposites: Effect of Peroxide Content", Polymer, 190, 122212 (2020). 7. Tayefi, M., Razavi-Nouri, M. and Sabet, A., "Using Constrained Mixture Design Method for Optimizing the Properties of Organoclay Filled Ethylene-Octene Copolymer Nanocomposites", Materials Research Express, 7, 015321 (2020). 8. Barzegari, F., Morshedian, J., Razavi-Nouri, M. and Karbalaei-Bagher, M., "Tailoring of Thermal and Mechanical Properties of Hollow Glass Bead-Filled Polypropylene Porous Films via Stretching Ratio and Filler Content", Polymer Composites, 40, 2938-2945 (2019). 9. Hosseini, M., Esfandeh, M., Razavi-Nouri, M. and Rezadoust, A.M., "Effect of Hybridization of Carboxyl Terminated Butadiene Acrylonitrile (CTBN) Liquid Rubber and Alumina Nanoparticles on Fracture Toughness of Epoxy Resin", Polymer Composites, 40, 2700-2711 (2019). 10. Razavi-Nouri, M. and Karami, M., "Water Sorption Kinetics of Acrylonitrile-Butadiene Rubber/Poly(Ethylene-co-Vinyl Acetate)/Organoclay Nanocomposites", Polymer, 154, 101-110 (2018). 11. Morshedian, J., Karbalaei-Bagher, M., Bayazian, H., Jamshidi, A. and Razavi-Nouri, M., "Unraveling the Bimodality of Polypropylene Film Grades Using Rheological Shear and Elongational Measurements: Inconsistent Results of Gel Permeation Chromatography", Polymer Science, Series A, 60, 523-529 (2018). 12. Jafari, B., Hakim, Sh. and Razavi-Nouri, M., "Cured Poly(Ethylene-g-Maleic Anhydride)/Graphene Nanocomposite: Properties and Characterization", Mechanics of Advanced Composite Structures, 5, 1-12 (2018). 13. Razavi-Nouri, M., Tayefi, M and Sabet, A., "Morphology Development and Thermal Degradation of Dynamically Cured Ethylene-Octene Copolymer/Organoclay Nanocomposites", Thermochimica Acta, 655, 302-312 (2017). 14. Razavi-Nouri, M., Sabet, A. and Tayefi, M., "Effect of Dynamic Curing Time on Thermal, Mechanical and Rheological Behavior of Organoclay-Containing Nanocomposites Based on Ethylene-Octene Copolymer", Journal of Polymer Research, 24, 101 (2017). 15. Razavi-Nouri, M., Karami, M. and Naderi, G., "Rheological Behavior and Morphology of Acrylonitrile-Butadiene Rubber/Poly(Ethylene-Co-Vinyl Acetate) Blends Filled by Various Organoclay Contents", Applied Clay Science, 145, 1-10 (2017). 16. Tayefi, M., Razavi-Nouri, M. and Sabet, A., "Influence of Ordering and Disordering of Organoclay on Rheological Properties of Uncured and Cured Ethylene-Octene Copolymer Nanocomposites", Applied Clay Science, 135, 206-214 (2017). 17. Razavi-Nouri, M., Sabet, A., Tayefi, M. and Imeni, M., "Effect of Organoclay Ordering and Agglomeration on Morphology and Mechanical Properties of Uncured and Dynamically Cured Ethylene-Octene Copolymer Nanocomposites", Macromolecular Materials and Engineering, 301, 1513-1524 (2016). 18. Momtaz, M., Barikani, M. and Razavi-Nouri, M., "Effect of Ionic Group Content on Thermal, Structural and Shape Memory Properties of Polycaprolactone-based Polyurethane Ionomers", Iranian Polymer Journal, 24, 505-513 (2015). 19. Razavi-Nouri, M. and Karami, M., "Effect of Rubber Content on Morphology and Thermal and Rheological Behaviors of Acrylonitrile-Butadiene Rubber/ Poly(Ethylene-Co-Vinyl Acetate)/Organoclay Nanocomposites”, Polymer, 55, 6940-6947 (2014). 20. Momtaz, M., Razavi-Nouri, M. and Barikani, M., "Effect of Block Ratio and Strain Amplitude on Thermal, Structural and Shape Memory Properties of Segmented Polycaprolactone-Based Polyurethanes", Journal of Materials Science, 49, 7575-7584 (2014). 21. Sobhani, H., Anderson, P.D., Meijer H.H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Non-Isothermal Modeling of a Non-Newtonian Fluid Flow in a Twin Screw Extruder Using the Fictitious Domain Method", Macromolecular Theory and Simulations, 22, 462-474 (2013). 22. Hajibaba, A., Naderi, Gh. Ghoreishy, M.H.R., Bakhshandeh, Gh. and Razavi-Nouri, M., "Effect of Single-Walled Carbon Nanotubes on Morphology and Mechanical Properties of NBR/PVC blends", Iranian Polymer Journal, 21, 505-511 (2012). 23. Razavi-Nouri, M., "Creep and Stress Relaxation Behavior of Polypropylene, Metallocene-Prepared Polyethylene and their Blends", Iranian Journal of Chemical Engineering, 9, 60-69 (2012). 24. Razavi-Nouri, M., "Effect of Carbon Nanotubes Content on Dynamic Mechanical Properties, TGA Analysis and Crystalline Structure of Polypropylene", Journal of Applied Polymer Science, 124, 2541-2549 (2012). 25. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., Anderson, P.D., Meijer H.H.E., "Modeling of Polymer Fluid Flow and Residence Time Distribution in Twin Screw Extruder Using Fictitious Domain Method", Plastics, Rubber and Composites, 40, 387-396 (2011). 26. Razavi-Nouri, M., Naderi, Gh., Parvin, A. and Ghoreishy, M.H.R., "Thermal Properties and Morphology of Isotactic Polypropylene/Acrylonitrile-Butadiene Rubber Blends in the Presence and Absence of a Nanoclay", Journal of Applied Polymer Science, 121, 1365-1371 (2011). 27. Taghizadeh, E., Naderi, Gh., Razavi-Nouri, M., "Effects of Organoclay on the Mechanical Properties and Microstructure of PA6/ECO Blend", Polymer Testing, 30, 327-334 (2011). 28. Ershad Langroudi, A., Razavi-Nouri, M. and Oromiehie, A.R., "Prediction of Viscoelastic Behavior of Interphase in Polypropylene-Chopped Rice Husk Composites for β-Relaxation Domain", Journal of Applied Polymer Science, 120, 1642-1651 (2011). 29. Sobhani, H., Razavi-Nouri, M. and Ghoreishy, M.H.R., "Investigation of Combination of Finite Element Formulation and Element Type on the Accuracy of 3D Modeling of Polymeric Fluid Flow in an Extrusion Die", Journal of Applied Polymer Science, 120, 1607-1615 (2011). 30. Naderi, Gh., Razavi-Nouri, M., Taghizadeh, E., Lafleur, P.G., Dubois, C., "Preparation of Thermoplastic Elastomer Nanocomposites Based on Polyamide-6/Polyepichlorohydrin-co-Ethylene Oxide", Polymer Engineering and Science, 51, 278-284 (2011). 31. Sobhani, H., Razavi-Nouri, M. and Ghoreishy, M.H.R., "Quasi-steady State Finite Element Modelling of Polymer Melt Flow in an Intermeshing Co-rotating Twin Screw Extruder", Iranian Polymer Journal, 19, 143-154 (2010). 32. Razavi-Nouri, M., "Study of Non-isothermal Crystallization Kinetics of Single-Walled Carbon Nanotubes Filled Polypropylene Using Avrami and Mo Models", Iranian Polymer Journal, 18, 167-176 (2009). 33. Razavi-Nouri, M., Ghorbanzadeh-Ahangari, M., Fereidoon, A. and Jahanshahi, M., "Effect of Carbon Nanotubes Content on Crystallization Kinetics and Morphology of Polypropylene", Polymer Testing, 28, 46-52 (2009). 34. Faghihi, F., Morshedian, J., Razavi-Nouri, M., and Ehsani, M., "Dynamic Rheological Behavior of Low Density Polyethylene/Poly(dimethylsiloxane) Immiscible Blends: Interfacial Modification via Reactive Blending", Iranian Polymer Journal, 17, 755-765 (2008). 35. Razavi-Nouri, M., Morshedian, J., Ehsani, M. and Faghihi, F., "Mechanical Properties and Morphology of Low Density Polyethylene/Poly(dimethylsiloxane) Immiscible Blends: Modeling and Influence of Curing Agent", e-Polymers, no.120 (2008). 36. Ershad Langroudi, A., Jafarzadeh-Dogouri, F., Razavi-Nouri, M. and Oromiehie, A.R., "Mechanical and Thermal Properties of Polypropylene/Recycled Polyethylene Terephthalate/Chopped Rice Husk Composites", Journal of Applied Polymer Science, 110, 1979-1985 (2008). 37. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Investigation of Thermal, Mechanical and Electrical Properties of Novel Polyurethanes/High Molecular Weight Polybenzoxazine Blends", Polymers for Advanced Technologies, 19, 1024-1032 (2008). 38. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Synthesis and Properties of Polybenzoxazine Modified Polyurethanes as a New Type of Electrical Insulators with Improved Thermal Stability", Polymer Engineering and Science, 48, 1329-1338 (2008). 39. Mohammadnia, Z., Zohurriaan-Mehr, M.J., Kabiri, K. and Razavi-Nouri, M., "Tragacanth Gum-Graft-Polyacrylonitrile: Synthesis, Characterization and Hydrolysis", Journal of Polymer Research, 15, 173-180 (2008). 40. Razavi-Nouri, M. and Hay, J.N., "Isothermal Crystallization Kinetics and Melting Behavior of Metallocene-Catalyzed Polyethylenes", Iranian Polymer Journal, 16, 105-112 (2007). 41. Razavi-Nouri, M. and Hay, J.N., ''Evaluation of the Crystallization Kinetics and Melting of Polypropylene and Metallocene-Prepared Polyethylene Blends'', Journal of Applied Polymer Science, 104, 634-640 (2007). 42. Sobhani, H., Razavi-Nouri, M. and Yousefi, A.A., "Effect of Flow History on Poly(vinylidine fluoride) Crystalline Phase Transformation", Journal of Applied Polymer Science, 104, 89-94 (2007). 43. Razavi-Nouri, M., "Properties of Polypropylene and Metallocene-Prepared Polyethylene Blends: Crystallization Behavior and Interaction Parameter", Polymer Testing, 26, 108-115 (2007). 44. Razavi-Nouri, M., "Studies of Comonomer Distributions and Molecular Segregations in Metallocene-Prepared Polyethylenes by DSC", Polymer Testing, 25, 1052-1058 (2006). 45. Razavi-Nouri, M., Jafarzadeh-Dogouri, F.,Oromiehie, A.R. and Ershad Langroudi, A., "Mechanical Properties and Water Absorption Behaviour of Chopped Rice Husk Filled Polypropylene Composites", Iranian Polymer Journal, 15, 757-766 (2006). 46. Razavi-Nouri, M. and Hay, J.N., "Phase Separation in Polypropylene and Metallocene Polyethylene Blends", Polymer Engineering and Science, 46, 889-895 (2006). 47. Razavi-Nouri, M., "Effect of Annealing and Pressure on Structure and Melting of a Polypropylene Random Copolymer", Iranian Polymer Journal, 15, 121-126 (2006). 48. Razavi-Nouri, M. and Hay, J.N., "Isothermal Crystallization and Spherulite Nucleation in Blends of Polypropylene with Metallocene-Prepared Polyethylene", Polymer International, 55, 6-11 (2006). 49. Ghoreishy, M.H.R., Razavi-Nouri, M. and Naderi, G., "Finite Element Analysis of a Thermoplastic Elastomer Melt Flow in the Metering Region of a Single Screw Extruder", Computational Materials Science, 34, 389-396 (2005). 50. Razavi-Nouri, M., "Thermal and Dynamic Mechanical Properties of a Polypropylene Random Copolymer", Iranian Polymer Journal, 14, 485-493 (2005). 51. Razavi-Nouri, M. and Hay, J.N., "Effect of Orientation on Mechanical Properties of Metallocene Polyethylenes", Iranian Polymer Journal, 13, 521-530 (2004). 52. Razavi-Nouri, M. and Hay, J.N., "Time-Temperature Superposition and Dynamic Mechanical Properties of Metallocene Polyethylenes", Iranian Polymer Journal, 13, 363-370 (2004). 53. Ghoreishy, M.H.R. and Razavi-Nouri, M., "Modeling the Flow in the Metering Zone of Single Screw Extruders Using a Helical Geometry Model", International Polymer Processing, XIX, 95-100 (2004). 54. Razavi-Nouri, M. and Hay, J.N., "Thermal and Dynamic Mechanical Properties of Metallocene Polyethylene", Polymer, 42, 8621-8627 (2001). 55. Ghoreishy, M.H.R., Karrabi, M. and Razavi-Nouri, M., "Development of Optimized Rubber Compounds for the Components of the Bead Section of a Low Aspect Ratio Steel-belted Radial Tire", Iranian Polymer Journal, 10, 115-123 (2001). 56. Ghoreishy, M.H.R., Razavi-Nouri, M. and Naderi, G., "Finite Element Analysis of Flow of Thermoplastic Elastomer Melt through Axisymmetric Die with Slip Boundary Condition", Plastics, Rubber and Composites, 29, 224-228 (2000). 57. Ghoreishy, M.H.R. and Razavi-Nouri, M., "Finite Element Analysis of Thermoplastic Melts Flow through the Metering and Die regions of Single Screw Extruders", Journal of Applied Polymer Science, 74, 676-689 (1999). 58. Naderi G., Razavi-Nouri, M., Mehrabzadeh, M. and Bakhshandeh G.R., "Studies on Dynamic Vulcanization of PP/NBR Thermoplastic Elastomer Blends", Iranian Polymer Journal, 8, 37-42 (1999). 59. Ghoreishy, M.H.R. and Razavi-Nouri, M., "A Three-Dimensional Finite Element Analysis of a Power-law Fluid in an Extrusion Die", Iranian Polymer Journal, 7, 277-287 (1998). 60. Razavi-Nouri, M. and Mehrabzadeh, M., "Studies on Rheological Behaviour of LDPE/EPDM Blends", Iranian Polymer Journal, 5, 237-241(1996). 61. Razavi-Nouri, M. and Morshedian, J., "Simulation of Stress-Strain Behaviour of Fibre Reinforced Cementitious Composites in Flexure", Iranian Journal of Polymer Science and Technology, 4, 226-234 (1995). 62. Razavi-Nouri, M. and Morshedian, J., "Impact, Compressive and Flow Properties of Fibre Reinforced Cementitious Composites", Iranian Journal of Polymer Science and Technology, 4, 134-140 (1995). 63. Razavi-Nouri, M. and Morshedian, J., "Tensile and Flexural Behaviour of Fibre Reinforced Cementitious Composites", Iranian Journal of Polymer Science and Technology, 4, 56-63 (1995). 64. Morshedian, J. and Razavi-Nouri, M., "Toughness and Ductility of Fibre Reinforced Cementitious Composites in Flexure'', Iranian Journal of Polymer Science and Technology, 3, 20-29 (1994).
b) Publications in Persian 1. Soheilpour, Z., Rezadoust, A.M., Razavi-Nouri, M., Garoosi K. and Ghaffarian, S.R.,"Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites", Iranian Journal of Polymer Science and Technology, 32(6), 497-507 (2020/1398). 2. Barzegari, F., Razavi-Nouri, M. and Morshedian, J., "Preparation of Porous Polyolefin Films or Membranes through Stretching Method", Polymerization (Basparesh), 8(2), 3-15 (2018/1397). 3. Soheilpour, Z., Rezadoust, A.M. and Razavi-Nouri, M., "Morphology, Thermal, Mechanical and Electrical Properties of Poly(Acrylonitrile-Butadiene-Styrene)/Carbon Nanotubes Nanocomposites: A Review", Polymerization (Basparesh), 8(1), 31-44 (2018/1397). 4. Razavi-Nouri, M. and Taslimi, A., "Physical Aging and Thermal and Mechanical Rejuvenation in Glassy Amorphous Polymers: A Review", Polymerization (Basparesh), 7, 48-59 (2018/1396). 5. Jafari, B., Hakim, Sh. and Razavi-Nouri, M., "Characterization of Microstructure and investigations on Physical, Mechanical, Thermal and Electrical Properties and Rheological Behaviors of Polyethylene/Graphene Nanocomposites", Iran Polymer Technology; Research and Development, 1, 23-35 (2017/1396). 6. Ezoji, M., Razavi-Nouri, M. and Rezadoust, A.M., "Optimization of Processing Parameters in 3D-Printing of poly (lactic acid) by Fused Deposition Modeling Method", Iranian Journal of Polymer Science and Technology, 30, 115-126 (2017/1396). 7. Najafloo, B., Razavi-Nouri, M. and Rezadoust, A.M., "A Review on Fused Deposition Modeling Method", Polymerization (Basparesh), 6(3), 74-85 (2016/1395). 8. Tayefi, M., Razavi-Nouri, M. and Sabet, A., "Ethylene-Octene Copolymer/Nanocaly Nanocomposites: 2- A Review on Mechanical Properties and Rheology", Polymerization (Basparesh), 5(3), 18-28 (2015/1394). 9. Tayefi, M., Razavi-Nouri, M. and Sabet, A., "Ethylene-Octene Copolymer/Nanocaly Nanocomposites: 1- A Review on Morphology, Crystalization and Thermal Properties", Polymerization (Basparesh), 5(2), 4-15 (2015/1394). 10. Mohebbi, M., Razavi-Nouri, M. and Sabet, A., "Investigation on Morphology and Physical and Mechanical Properties of EVA/Clay Nanocomposites", Polymerization (Basparesh), 4, 4-20 (2014/1393). 11. Esmizadeh, E., Razavi-Nouri, M. and Kalati-Vahid, A., "Positron Annihilation Life-time Spectroscopy (PALS) II. Introduction and Applications in Polymer Science", Polymerization (Basparesh), 2, 22-29 (2012/1391). 12. Esmizadeh, E., Razavi-Nouri, M. and Kalati-Vahid, A., "Positron Annihilation Life-time Spectroscopy (PALS) I. Introduction and Applications in Polymer Science", Polymerization (Basparesh), 2, 4-12 (2012/1391). 13. Salimi, A., Yousefi, A. A. and Razavi-Nouri, M., "Temperature Dependency of Poly(vinilidine Fluoride) Chain Dimension in Solution and Melt State", Iranian Journal of Polymer Science and Technology, 25, 31-40 (2012/1391). 14. Razavi-Nouri, M., "Effect of Single-Walled Carbon Nanotubes on Non-isothermal Crystallization Kinetics of Polypropylene: Comparison of Ozawa and Cazé-Chuah methods", Iranian Journal of Polymer Science and Technology, 22, 53-61 (2009/1388). 15. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "3-Dimensional Modeling of Flow of Polymeric Fluids with Various Viscosities in an Extrusion Die Using Mixed Method and Tetrahedral Elements", Iranian Journal of Polymer Science and Technology, 21, 167-179 (2008/1387). 16. Sobhani, H., Yousefi, A.A. and Razavi-Nouri, M., "Investigation on the Effect of Extensional Flow on the -Crystalline Phase Formation in Extruded PVDF Films", Iranian Journal of Polymer Science and Technology, 19, 43-51 (2006/1385). 17. Sabzali-Nasery, M.A., Oromiehie, A.R. and Razavi-Nouri, M., "Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method", Iranian Journal of Polymer Science and Technology, 19, 13-21 (2006/1385). 18. Razavi-Nouri, M., "Polymer Impregnated Concrete-A review", Iranian Journal of Polymer Science and Technology, 7, 45-55 (1998/1377).
c) Publications in Persian as short notes 1. Jafarzadeh-Dogouri, F., Razavi-Nouri, M., "Plastics-Wood Composites-Part 1", Panjereh, no. 9, 42-45 (2008/1387). 2. Jafarzadeh-Dogouri, F., Razavi-Nouri, M., "Plastics-Wood Composites-Part 2", Panjereh, no. 10, 38-41 (2008/1387). 3. Jafarzadeh-Dogouri, F., Razavi-Nouri, M., "Preparation of Plastics-Wood Composites", Panjereh, no. 12, 32-33 (2008/1387).
d) Presentations in National and International Seminars 1. Razavi-Nouri, M., Ziaee, F. and Saeedi, F., "Mechanical Properties and Rheological Behavior of Poly(methyl methacrylate)/Poly(ethylene-co-vinyl acetate)/Multi-Walled Carbon Nanotubes Nanocomposites", 13th International Seminar on Polymer Science and Technology (ISPST 2018), 19-22 November 2018, Amirkabir University of Technology, Tehran, Iran. 2. Bayazian, H., Yadegari, A., Morshedian, J., Jamshidi, A. and Razavi-Nouri, M., "Evaluation of Morphology and Crystallinity of Biaxially Oriented Polypropylene Films", AIP Conference Proceedings, 34th International Conference of the Polymer Processing Society (PPS-34), 21-25 May 2018, Taipei International Convention Center, Taipei, Taiwan. 3. Ezoji, M., Razavi-Nouri, M. and Rezadoust, A.M., "Effect of Rasor Angle on the Mechanical Properties of PLA 3D Printed Articles", 12th International Seminar on Polymer Science and Technology, 2-5 November 2016, Islamic Azad University, Tehran, Iran. 4. Ezoji, M., Razavi-Nouri, M. and Rezadoust, A.M., "Influence of Layer Thickness on the Tensile Properties of the Samples Manufactured by Fused Deposition Modelling", 12th International Seminar on Polymer Science and Technology, 2-5 November 2016, Islamic Azad University, Tehran, Iran. 5. Barzegari, F., Morshedian, J. and Razavi-Nouri, M., "Making Porous Polypropylene Films by Aid of Hollow Glass Beads and Hot stretching: Strain Softening Effect", 12th International Seminar on Polymer Science and Technology, 2-5 November 2016, Islamic Azad University, Tehran, Iran. 6. Hakim, S., Razavi-Nouri, M. and Jafari, B., "Effect of Graphene Nanoplatelets on the Mechanical Properties, Crystallization and Dynamic Mechanical Behavior of Poly(etheylne-g-maleic anhydride)", The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 16-17 December 2014, Iran University of Science and Technology, Tehran, Iran. 7. Hosseini, M., Esfandeh, M., Razavi-Nouri, M. and Rezadoust, A.M., "Mechanical Properties of the Epoxy Resin-Based Composites Toughened by CTBN Rubber", 11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran. 8. Razavi-Nouri, M., Sabet, A. and Tayefi, M., "Effect of Dynamic Cross-Linking on Physical and Mechanical Properties of Nanoclay-Containing Nanocomposites Based on Ethylene-Octene Copolymer", 11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran. 9. Razavi-Nouri, M., Sabet, A. and Mohebbi, M., "Effect of Dicumyl Peroxide Content on the Mechanical Properties of EVA/NBR/Organoclay Vulcanized Nanocomposites", 11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran. 10. Bayazian, H., Morshedian, J., Jamshidi, A. and Razavi-Nouri, M., "Processing, MD and TD Stretching of Cast Polypropylene Film and Evaluation of Film Performance", 11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran. 11. Jafari, B., Hakim, Sh. and Razavi-Nouri, M., "Crystallization and Dynamic Mechanical Behavior of Graphene Nanoplatelets– Poly(ethylene-g-maleic anhydride) Nanocomposites", 11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran. 12. Hosseini, M., Esfandeh, M., Razavi-Nouri, M. and Rezadoust, A.M., "Effect of Alumina Nanoparticles on the Fracture Toughness of Hybrid Epoxy-Rubber Nanocomposites", 5th International Conference on Nanostructures, 6-9 March 2014, Kish Island, Iran. 13. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Simulation of Non-Newtonian Fluids Flow in Twin Screw Extruders", 10th International Seminar on Polymer Science and Technology, 21-25 October 2012, AmirKabir University of Technology, Tehran, Iran. 14. Hajibaba, A., Naderi, Gh., Ghoreishy, M.H.R., Bakhshandeh, Gh.and Razavi-Nouri, M., "Effect of Single Walled Carbon Nanotube on Mechanical and Morphological Properties of Dynamically Vulcanized Thermoplastic Elastomer Based on NBR/PVC", PPS 2011, Asia/Australia Regional Meeting, 14-17 November 2011, Kish Island, Iran. 15. Momtaz, M., Barikani, M. and Razavi-Nouri, M., "Synthesis & Characterization of Segmented Shape Memory Polyurethanes: Effect of Soft Segment Length, Hard Segment & Ionic Group Content on Different Properties", 17th Iranian Seminar of Organic Chemistry, University of Mazandaran, 13-15 October 2010, Babolsar, Iran. 16.Tamaskani, M., Bakhshandeh Gh.and Razavi-Nouri, M., "Comparison the Effect of Natural Rubber, Conventional Fillers and Nanoclay on the Modification of Mechanical Properties of Butadiene Rubber", 10th Iran Rubber Industries Conference & Expo, 30th November-2nd December 2010, Iran Polymer and Petrochemical Institute, Tehran, Iran. 17. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Quasi Steady-State Simulation of Polymeric Fluids Flow in an Intermeshing Co-rotating Twin Screw Extruder (TSE)", 9th International Seminar on Polymer Science and Technology, 17-21 October 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran. 18. Sobhani, H., Ghoreishy, M.H.R., Razavi-Nouri, M. and Anderson, P., "Transient Simulation of Polymeric Fluids Flow in an Intermeshing Co-rotating Twin Screw Extruder Using Fictitious Domain Method", 9th International Seminar on Polymer Science and Technology, 17-21 October 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran. 19. Razavi-Nouri, M., Naderi, Gh., Parvin, A. and Ghoreishy, M.H.R.,"Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on NBR/PP", 25th Annual Meeting of the Polymer Processing Society (PPS-25), 1-5 March 2009, Goa, India. 20. Taghizade, E., Naderi, Gh. and Razavi-Nouri, M., "Nanocomposite Thermoplastic Elastomer Based PA6/ECO: Rheology and Morphology", 1st International Conference on Composite: Characterization, Fabrication & Application (CCFA-1), 15-18 December 2008, Kish Island, Iran. 21. Oromiehie, A.R., Sabzali Nasery, M.A. and Razavi-Nouri, M., "Polypropylene Nucleated with a Sorbitol Derivative and Maleic Anhydride Grafted Polypropylene: An Investigation on Crystallization and Polarity", Macro- and Supramolecular Architectures and Materials: Synthesis, Properties and Applications (MAM-08), 7-11 September 2008, Heinrich Heine Universität, Düsseldorf, Germany, P.312-313. 22. Naderi, Gh., Razavi-Nouri, M. and Taghizade, E., "Preparation of Nanocomposite Thermoplastic Elastomer Based on ECO/PA6", Polymer Processing Society, 24th Annual Meeting, 15-19 June 2008, Salerno, Italy, P.428. 23. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Three-Dimensional Simulation of Flow of Polymeric Fluids in an Extrusion Die Using Mixed Finite Element Method and Tetrahedral Elements", 1st National Conference on CFD Application in Chemical Engineering, 14-15 May 2008, Razi University, Kermanshah, Iran (in Persian). 24. Sobhani, H., Yousefi, A.A., Razavi-Nouri, M. and Ghoreishy, M.H.R., "Simulation of Extensional Flow in a Two-Channel Die for PVDF Film Extrusion", ISPST 2007, 23-25 October 2007, Sharif University, Tehran, Iran. 25. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Preparation and Characterization of Novel Polyurethane/Polybenxoxazine Interpenetrating Polymer Networks", ISPST 2007, 23-25 October 2007, Sharif University, Tehran, Iran. 26. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Novel Electrical Insulators from Alloys of High Molecular Weight Polybezoxazine Precursor and Blocked Polyurethanes", ISPST 2007, 23-25 October 2007, Sharif University, Tehran, Iran. 27. Morshedian, J., Razavi-Nouri, M. and Faghihi, F., "Morphology and Rheo-Mechanical Behaviour of LDPE/PDMS Blends: Modeling and Effect of Reactive Blending", UNESCO/IUPAC Conference on Macromolecules: Polymers for Advanced Applications, 20-23 November 2006, Stellenbosch, South Africa. 28. Mohammadnia, Z., Zohuriaan-Mehr, M.J., Kabiri, K. and Razavi-Nouri, M., "Tragacanth Gum-graft-polyacrylonitrile: Synthesis, Characterization and Hydrolysis", 13th Iranian Seminar of Organic Chemistry, 7-9 September 2006, Bu-Ali Sina University, Hamedan, Iran. 29. Sobhani, H., Yousefi, A.A. and Razavi-Nouri, M., "Phase Transitions During Stretching of PVDF Films", ISPST 2005, 27-29 September 2005, AmirKabir University of Technology, Tehran, Iran. 30. Sabzali Nasery, M.A., Oromiehie, A.R. and Razavi-Nouri, M., "Modification of Gas Permeability of Polypropylene by Nucleating Agent and Functionalized Polypropylene", ISPST 2005, 27-29 September 2005, AmirKabir University of Technology, Tehran, Iran. 31. Sabzali Nasery, M.A., Oromiehie, A.R. and Razavi-Nouri, M., "Synchronous Effect of PP-g-MA and Diparamethyl Dibenzylidene Sorbitol (MDBS) Additives on the Increasing Crystallization Temperature of Polypropylene", ISPST 2005, 27-29 September 2005,AmirKabir University of Technology, Tehran, Iran. 32. Yousefi, A.A., Razavi-Nouri, M. and Salimi, A., "Temperature Dependency of the End-to-End Distance of PVDF Chains Using Rheological Measurements", IChEC9, 23-25 November 2004, Tehran, Iran (in Persian). 33. Razavi-Nouri, M. and Hay, J.N., "Crystallization Behaviour of Polypropylene and Metallocene Polyethylene Blends", World Polymer Congress, IUPAC Macro 2004, 4-9 July 2004, Paris, France. 34. Ghoreishy M.H.R and Razavi-Nouri, M., "Modeling the Flow of TPEs in the Metering Zone of Single Screw Extruders Using Helical Geometry Model", World Polymer Congress, IUPAC Macro 2004, 4-9 July 2004, Paris, France. 35. Salimi, A., Yousefi, A.A. and Razavi-Nouri, M., "Effect of Solvent on Conformational Transformations of Poly(vinylidine fluoride)", World Polymer Congress, IUPAC Macro 2004, 4-9 July 2004, Paris, France. 36. Razavi-Nouri, M. and Hay, J.N., "Anisotropic Properties of Metallocene Polyethylenes", ISPST 2003, 12-15 May 2003, Iran Polymer and Petrochemical Institute, Tehran, Iran. 37. Razavi-Nouri, M. and Hay, J.N., "Crystallization Kinetics of Metallocene Polyethylene", The 8th Iranian Students Seminar in Europe, 5-7 May 2001, Manchester, UK. 38. Ghoreishy, M.H.R. and Razavi-Nouri, M., "Simulation of Flow in Single Screw Extruders Using Finite Element Method", Fifth Seminar on Polymer Science and Technology, 12-14 September 2000, Tehran, Iran. 39. Razavi-Nouri, M. and Hay, J.N., "Thermal and Mechanical Properties of Metallocene Polyethylene and Polypropylene Blends”, 7th Iranian Students Seminar in Europe, 20-21 May 2000, UMIST, Manchester, UK.
Iranian Patents 1. Jafarzadeh-Doguri, F., Razavi-Nouri, M., Oromiehie, A.R. and Ershad Langroudi, A., "Preparation of Artificial Wood Profile from Polypropylene and Rice Husk", Iranian Patent No. 34898 (2006/1385). 2. Oromiehie, A.R., Jafarzadeh-Doguri, F., Razavi-Nouri, M. and Ershad Langroudi, A., "Preparation of Artificial Wood Profile from Recycled Polypropylene, Poly(ethylene terephthalate) and Rice Husk", Iranian Patent No. 34899 (2006/1385). 3. Taghizade, E., Naderi, Gh. and Razavi-Nouri, M., "Preparation of Thermoplastic Elastomer Nanocomposites Based on PA6/ECO/Nanoclay", Iranian Patent No. 50485 (2008/1387). 4. Parvin, A., Razavi-Nouri, M., Naderi, Gh. and Ghoreishy, M.H.R., "Preparation of Thermoplastic Elastomer Nanocomposites Based on PP/NBR/Nanoclay", Iranian Patent No. 53379 (2008/1387). 5. Hajibaba, A., Naderi, Gh., Ghoreishy, M.H.R., Bakhshandeh, Gh. and Razavi-Nouri, M., "Preparation of Dynamically Vulcanized Thermoplastic Elastomer Nanocomposites Based on PVC/NBR/Single Walled Carbon Nanotube", Iranian Patent No. 30479 (2011/1390). 6. Razavi-Nouri, M., Sabet, A. and Tayefi, M., “Preparation of Dynamically DCP Cured Nanocomposites Based on Ethylene-Octene Copolymer/Organoclay”, Iranian Patent No. 90689 (2016/1395). 7. Barzegari, F., Morshedian, J. and Razavi-Nouri, M., “Preparation of Porous PP Composite Films”, Iranian Patent No. 92176 (2017/1396).
Interested Research Fields
Teaching Ph.D. Courses:
M.Sc. Courses:
B.Sc. Courses:
Supervising of the Graduated Students
Honors and Awards 1. Commendation from vice-chancellor of The Tehran University, Dr. Afrouz, for the first class honors in my M.Sc. program in 1993.
2. Award of a full scholarship from The Iranian Ministry of Science, Research and Technology for my Ph.D. program in the UK (1998-2002).
3. Selected by Iran Polymer and Petrochemical Institute and awarded by the Director of the Institute as a member of the best research group in 2003.
4. Selected by Iran Polymer and Petrochemical Institute and awarded by the Director of the Institute as a member of the best research group in 2006.
5. A Member of center of excellence for "Polymer Processing and Polymeric Coatings", Ministry of Science, Research and Technology of Iran, 2012-Present.
Other Professional Activities Professional Activities
1. The reviewer of the following published books (translated and authored in Persian):
(a) Mechanical Properties of Polymers and Composites, Written by Lawrence E. Nielsen and Robert E. Landel, Translated in Persian by E. Ghasemi, M. Minaei-Zaeem and M. Ryahi-Nezhad, Published by Iran Polymer and Petrochemical Institute, 2010.
(b) Principles of Physical Chemistry in Polymers, Written in Persian by H. A. Khonakdar, S. H. Jafari and J. Seifi, Published by Iran Polymer and Petrochemical Institute, 2013.
2. Frequently reviewer of the following journals:
(a) ACS Applied Materials and Interfaces (published by American Chemical Society) (in English) (b) Journal of Applied Polymer Science (published by John Wiley & Sons, Ltd) (in English) (c) Polymer International (published by Society of Chemical Industry (SCI) and John Wiley & Sons, Ltd) (in English) (d) Materials Chemistry and Physics (Published by Elsevier) (in English) (e) Polymer Engineering and Science (published by John Wiley & Sons, Ltd) (in English) (f) Polymer Bulletin (published by Springer) (in English) (g) Polymer Composites (published by John Wiley & Sons, Ltd) (in English) (h) Colloid and Polymer Science (published by Springer) (in English) (i) Materials Science & Engineering A (Published by Elsevier) (in English) (j) Polymer-Plastics Technology and Engineering (published by Taylor and Francis) (in English) (k) eXPRESS Polymer Letters (published by Budapest University of Technology and Economics) (in English) (l) e-Polymers (The Scientific e-Only Polymer Journal) (in English) (m) Journal of Polymer Engineering (in English) (n) Journal of Polymer Research (published by Springer) (in English) (o) Journal of Reinforced Plastics and Composites (published by Sage) (in English) (p) Iranian Polymer Journal (published by Iran Polymer and Petrochemical Institute) (in English) (q) Polyolefins Journal (published by Iran Polymer and Petrochemical Institute) (in English) (r) Iranian Journal of Chemical Engineering (published by Iranian Association of Chemical Engineers) (in English) (s) Iranian Journal of Polymer Science & Technology (published by Iran Polymer Society) (in Persian) (t) Iranian Journal of Chemistry and Chemical Engineering (in Persian) (u) Building Engineering and Housing Service (published by Building and Housing Research Center) (in Persian)
3. A member of scientific committee and session chair of physical chemistry of polymers in ISPST 2014. 4. The reviewer of papers submitted to seminars concerning to polymer science and engineering in Iran. 5. Organizer and lecturer of the following workshops: (a) Crystalline Polymers: Structure and Morphology (b) Polyethylene: Structure, Properties and Applications 6. A member of the committee for preparation of national standards for "Thermal Insulation Products for Buildings" and also the head of the national standard committee in a few occasions.
|
طراحی سایت آریانیک توسط پورتال آریانیک aryanic