Curriculum Vitae


Jalal Barzin
(Ph.D., M.Sc., B.Sc.)



Associate Professor of Polymer Engineering
Biomaterials Department, 
Head of Polymer Science Faculty
PO Box 14965/115, Tehran, Iran,
Tel :( 9821) 44787026, Fax :( 9821) 44787076
E-mail:  j.barzin@ippi.ac.ir
             

Education and Qualification:
 

B.Sc. ; Chemical Engineering (Polymer Industries) , Isfahan University of Technology (IUT).
M.Sc. ; Polymer Engineering, Iran Polymer and Petrochemical Institute(IPPI) .
Ph.D.; Polymer Engineering (2003), (IPPI).
Research visiting: Collaboration with professor Takeshi Matsuura, Industrial membrane research institute (IMRI), chemical engineering department, Ottawa University, Ottawa, Canada,2003.

Teaching Experience:
 
Membrane separation, Biomaterials, Polymer surface modification,Biocompatibility in nano scale , Polymer technology and, chemistry,
Mathematics for chemical engineering

Research Interests:
 
Hollow fiber and Flat sheet membranes manufacturing
Membranes in biomaterials and Tissue engineering
Polymers in drug delivery systems
Hemodialysis, RO,Ultra, Micro and Nano filtration
Thermodynamic of polymer solutions and Phase inversion studies
Membranes cleaning 

Journal Papers:

1)  J. Barzin., S. S. Madaeni and H.Mirzadeh., M. Mehrabzadeh., Effect of poly vinyl pyrrolidone on morphology and performance of hemodialyssis membranes prepared from polyether sulfone, Journal of applied polymer science, (2004), 3804-3813.

2)  Barzin J., Feng C., Khulbe K.C., Matsuura T., Madaeni S. S., Mirzadeh H., Characterization of polyether sulfone hemodialysis membrane by ultrafiltration and atomic force microscopy, Journal of Membrane science, (2004), 77-85.

3) Barzin J., Madaeni S. S., Mirzadeh H., Effect of Preparation Conditions on Morphology and Performance of Hemodialysis Membranes Prepared from Polyether Sulfone (PES) and Polyvinylpyrrolidone (PVP), Iranian polymer Journal, (2005), 353-360.

4) Madaeni S.S., Rahimpour A. and Barzin J., Preparation of Polysulfone Ultrafiltration Membranes for Milk Concentration: Effect of Additives on Morphology and Performance. Iranian Polymer Journal, (2005), 421-428.

5) Barzin J., Azizi H., Morshedian J., Preparation of Silane-Grafted and MoistuCross-Linked Low Density Polyethylene: Part I: Factors Affecting Performance of Grafting and Cross-Linking. Polymer-Plastics Technology and Engineering, (2006), 979-983.

6) Barzin J., Madaeni S.S. and Poormoghadasi S., Hemodialysis Membrane Prepared from Polyvinyl Alcohol: Effect of Preparation Conditions on Morphology and Performance. Journal of Applied Polymer Science, (2007), 2490-2497.

7) Azizi H., Barzin J. and Morshedian J., Silane crosslinking of polyethylene: the effects of EVA, ATH and Sb2O3 on properties of the production in continuous grafting of LDPE. eXPRESS Polymer Letters, (2007) 378-384.

8) Barzin J., Azizi H. Morshedian J., Preparation of Silane-Grafted and Moisture Crosslinked Low Density Polyethylene. Part II: Electrical, Thermal and Mechanical Properties, (2007) 305-310.

9) Barzin J. Sadatnia B. Theoretical phase diagram calculation and membrane morphology evaluation for water/solvent/polyethersulfone systems. Polymer, (2007) 1620-1631.

10) Madaeni S.S., Esmaeili M and Barzin J., Preparation and Optimasation of Polyethersulphone- Based Composite Mmembranes for Air Separation at Low Pressures. Polymers & Polymer Composites, (2007) 579-590.

11) Zare.M, Mobedi.H, Barzin.J, Mivehchi.H, Jamshidi.A, Mashayekhi.R: Effect of Additives on Release Profile of Leuprolide Acetate in an In Situ Forming Controlled-Release System: In Vitro Study. Journal of Applied Polymer Science, (2008) 3781-3787.

12) Barzin J. and Sadatnia B., Correlation between macrovoid formation and the ternary phase diagram for polyethersulfone membranes prepared from two nearly similar solvents., Journal of Membrane Science, (2008) 92-97.
13) Astaneh R., Erfan M, Barzin J., Mobedi H and Moghimi HR, Effect of ethyl benzoate on performance, morphology and erosion of PLGA implants formed in situ. Advances in Polymer Technology, (2008) 17-26.

14) Madaeni S.S., Barzin J and Jokar Z., Evaluation of the Morphology and Performance of Polyether Sulfone Reverse Osmosis Composite and Non-Composite Membranes. Polymers & Polymer Composites, (2009) 101-108.

15) Gholizadeh B., Arefazar A and Barzin J., Polycarbonate/ polyamide 6/ nanoclay ternary nanocomposite membranes: Preparation, characterization and gas separation properties. Polymers & Polymer Composites, (2009) 181-188.

16) Madaeni S.S., Rafiee E.,Seyedzadeh Z and Barzin J. Effect of Dodeca_Tungstophosphric Acid on morphologh and performance of polyvinyl alcohol membrane for gas separation. Journal of Applied Polymer Science, (2009) 484-490.

17) Esmaeili, M., Madaeni, S. S., Barzin, J., The dependence of morphology of solid polymer electrolyte membranes on transient salt type: effect of cation type”, Polymer International, (2009) 1006-1013.

18) Farrokhzad. H, Mobedi. H, Barzin. J and Poorkhalil. A, Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in Situ Forming System based on Poly (lactide – co – glycolide). Iranian Jurnal of Polymer Siene and Technology (2010) 495-505.

19) Chaee. A, Shariaty – Niassar. M, Barzin. J, Matsuura. T, Effects of chitosan membrane morphology on coper ion adsorption, Chemical Engineering Journal(2010) 46-55.

20) Sorush. A, Barzin J, Barikani. M, The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration Composite Memranes Based on Polyether Sulfone. Iranian Jurnal of Polymer Siene and Technology, (2010) 213-222.

21) Madaeni. S. S, Rafiee. E Seyedzadeh. Z, Barzin. J, Effect of Dodea – Tungstophosphoric Acid on Morphology and Performance of Polyethersulfone Membrane for Gaz Separation. Journal of polymer engineering, (2010) 109-133.
 
22) Mortazavi M., Mortaheb H. R., Barzin J., Mokhtarani B., Salehi Shahrabi S., Pervaporative Desulfurization of Thiophene/n- heptane by a composite membrane of PEG/PVP Blend on PES, world academy of science , engineering and technology, 202-206, 2011.

23) Majid Esmaelili, Sayed S Madaeni, Jalal Barzin, Morphological dependency of polymer electrolyte membranes on transient salt type: effets of anion species. Polymer International, (2011) 362-370.

24) Pazokian. H, Jelvani, S, Barzin. J, Mollabashi. M, Abolhosseini. S, Effect of spot size on cone formation in a XeCl laser ablation of polyethersulfone films. Optics Communications, (2011) 363-367.

25) H. Pazokian, S. Jelvani, M. Mollavashi, J. Barzin, G. Azizavadi Farahani, ArF laser surface modification of polyethersulfone film: Effect of laser fluence in improving surface biocompatibility. Applied Surface Science, (2011) 6186-6190.
26) H. Pazokian, M. Mollavashi, S. Jelvani, J. Barzin, SH. Abolhoseini, Etching of a polythersulfone film using a XeCl laser. Optical Engineering (2011) 84301-4.

27) Hedieh Pazokian, Alexandros Selimis, Emmanuel Stratakis, Mahmoud Mollabashi, Jalal Barzin, Saeid Jelvani, KrF laser ablation of a polyethersulfone film: Effect of pulse duration on structure formation. Applied Surface Science, (2011).

28) N. Zare, M.Khorasani, K.Hemmesi, H.Mirzadeh, H.Azizi, B.Sadatnia, M.Hatami, S.Kiani, J.Barzin, H. Baharvand, Differentiation of Embryonic Stem Cells into Neural Cells on 3D Poly (D, L-lactic acid) Scaffolds versus 2D Cultures. International Journal of Artifical Organs, (2011).

29) M. Esmaeili, S.S. Madaeni, J. Barzin, N. Yousefimehr, Effect of silver ions coordination on morphology and performance of PES/PVP composite membrane in facilitated transport of ethylene, Separation and Purification Technology (2011) 371 – 383.
 
30) Hedieh Pazokian, Mahmoud Mollabashi, Alexandros Selimis, Emmanuel Stratakis, Jalal Barzin, Saeid Jelvani. Effect of pulse duration on KrF laser treatment of a polyethersulfone film: cell culture study, Applied Physics A, 2012, 633-637.
 
31) H Pazokian,A Selimis, Jalal Barzin, Saeid Jelvani, Mahmoud Mollabashi, C Fotakis and E Stratakis. Tailoring the wetting properties of polymers from highly hydrophilic to superhydrophobic using UV laser pulses, Journal of Micromechanics and Microengineering, 2012, 22.

32) S. Salehi Shahrabi, H.R. Mortaheb, J. Barzin, M.R. Ehsani, Pervaporative performance of a PDMS / blended PES composite membrane for removal of toluene from water, Desalination (2012) 281 – 289.

33) Adel Soroush, Jalal Barzin, Mahdi Barikani, Mahdi Fathizadeh, Interfacially polymerized polyamide thin film composite membranes: Preparation characterization and performance evaluation, Desalination (2012) 310 – 316.

34) H.Pazokian, J.barzin, M.Mollabashi, S. Jelvani, S. Abolhosseini, Exploring the Influence of a XeCl Laser Treatment on Biocompatibility of Polyethersulfone Film, Laser Physics, (2012) 922 – 929.

35) B. Gholizadeh, A. Arefazar, J. Barzin, Morphology and gaz permeability of polymeric membrane by PC / PA6 / Nanoclay ternary nanocomposite, polymers and polymer Composites, (2012), 271 – 278.

36) Mohannad Massumi, Mozhgan Abasi, Hamideh Babaloo, Panieh Terraf, Mojtaba Safi, Mahdi Saeed, Jalal Barzin, Mojgan Zandi, Masoud Soleimani, The Effect of Topography on Differentiation Fates of Matrigel – Coated Mouse Embryonic Stem Cells Cultured on PLGA Nanofibrous Scaffolds, Tissue Engineering, (2012), Part A Volume 18, Numbers 5 and 6, 2012, 609 – 620.
 
37) B.H. Gholizadeh, A.Arefazar and Jalal. Barzin, "Morphology and gas permeability of polymeric membrane by PC / PA6 / Nanoclay ternary nanocomposite, polymers and polymer Composites, 2012, 20.
 
38) M. S. Amini-Fazl, H. Mobedi, J. Barzin, H. Abedini, Incorporation of HAS Microparticles within the Taxol-Loaded In situ Forming PLGA ‎Microspheres: Synthesis, Characterization, and Drug Release, International Journal of Polymeric Materials and Polymeric Biomaterials, 2014, 63, 632-640.

39) H.Pazokian, M.Mollabashi, A.Selimis,E.Stratakis, J.barzin and S. Jelvani’ Effect of puls duration on KrF laser treatment of a polyether sulfone film: cell culture study Applied Physics A, ,(2013) ,110,3,633-637.

40) S. S. Madaeni, M. Esmaeili, S. Attar Nosrati, and J. Barzin, Preparation and Characterization of PES and PA Composite Membranes for Air Separation at Low Pressures, Intern. Polymer Processing,(2013), 28, 3, 281 – 290.

41) M. Esmaeili, S. S. Madaeni, and J. Barzin, Morphology and Gas-Permeation Analyses for Poly(ether sulfone)/Poly(vinyl alcohol) Electrolyte Composite Membranes in theFacilitated Transport Process, J. Appl. Polym.Sci.(2013), 129,1569 –1585.

42) M. Esmaeili, S. S. Madaeni, and J. Barzin, The Effect of Carrier Salts Blending on the Morphology, Stability and Permeation Properties of PES/PEO Facilitated Transport Membranes, Separation and Purification Technology.(2013), 103,289 –305.

43) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A. Zarghan, Adsorption of copper and nickel ions on macroporous chitosan membrane: Equilibrium study, Applied Surface Science Volume 258, Issue 19, 15 July 2012, Pages 7732–7743.

44) Ali Mota, Abbas Sahebghadam Lotfi, Jalal Barzin, Mohammad Massumi, Mostafa Hatam, Behzad Adibi," Study of hBMSC Adhesion and Proliferation on RGD-modified Polycaprolactone/Gelatin Nanofibrous Scaffold."Modares Journal of Medical Sciences: Pathobiology, Vol 16, No 1, spring 2013, Pages: 75-87.

45) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A.F.Ismail, chitosan /Polyethersulfone composite nanofiltration membrane for industrial wastewater treatment. Int.J.Nanosci.Nanotechnol.(2013)9(4),213-220.

46) M. Naeimi, A. Karkhaneh, J. Barzin, M. T. Khorasani, A. Ghaffarieh” Novel PDMS-based Membranes: Sodium Chloride and Glucose Permeability “Journal of Applied Polymer Science, (2013) ,3940-3947,5,127.
 
47) H.Pazokian, S. Jelvani, M.Mollabashi,and J.barzin “Review of the biocompatibility and blood compatibility properties of polyethersulfone film modified by the excimer and CO2 lasers” Laser Physics (2014), 24,066001.

48) Mohammad Amini-Fazl, Hamid Mobedi and Jalal Barzin," Incorporation of HSA Microparticles within the Taxol-Loaded In situ Forming PLGA Microspheres: Synthesis, Characterization and Drug Release"International Journal of Polymeric Materials and Polymeric Biomaterials (2014) 63,632-640.

49) Mohammad Amini-Fazl, Hamid Mobedi and Jalal Barzin, Investigation of aqueous stability of taxol in different release media, Drug Development and Industrial Pharmacy.(2014), 40 (4),519–526.
 
50) Ranjbarzadeh-Dibazar, A., Shokrollahi, P., Barzin, J., & Rahimi, A. (2014). Lubricant facilitated thermo-mechanical stretching of PTFE and morphology of the resulting membranes. Journal of Membrane Science470, 458-469.
 
51) Mota, A., Lotfi, A. S., Barzin, J., Hatam, M., Adibi, B., Khalaj, Z., & Massumi, M. (2014). Human bone marrow mesenchymal stem cell behaviors on PCL/gelatin nanofibrous scaffolds modified with a collagen IV-derived RGD-containing peptide. Cell Journal (Yakhteh)16(1), 1.
 
52) Saeed, M., Mirzadeh, H., Zandi, M., Irani, S., &Barzin, J. (2015). Rationalization of specific structure formation in electrospinning process: Study on nano‐fibrous PCL‐and PLGA‐based scaffolds. Journal of Biomedical Materials Research Part A103(12), 3927-3939.
 
53) Jafarinasab, M., Barzin, J., Mortaheb, H. R., & Mobedi, H. (2015). Structure and performance characterization of PDMS/PES-based pervaporation membranes for ethanol/water separation. Iranian Polymer Journal24(12), 989-1002.
 
54) Ghanian, M. H., Farzaneh, Z., Barzin, J., Zandi, M., Kazemi‐Ashtiani, M., Alikhani, M.& Baharvand, H. (2015). Nanotopographical control of human embryonic stem cell differentiation into definitive endoderm. Journal of Biomedical Materials Research Part A103(11), 3539-3553.
 
55) Jafari‐Nodoushan, M., Barzin, J., & Mobedi, H. (2015). Size and morphology controlling of PLGA microparticles produced by electro hydrodynamic atomization. Polymers for Advanced Technologies26(5), 502-513.
 
56) Sakine Khezli, Mojgan Zandi, Jalal Barzin, Fabrication of electrospun nanocomposite polyethersulfone membrane for microfiltration, Polymer Bulletin, 2016, 73,  2265–2286.
 
 
57) Ghaee, A., Shariaty-Niassar, M., Barzin, J., Matsuura, T., & Fauzi Ismail, A. (2016). Preparation of chitosan/cellulose acetate composite nanofiltration membrane for wastewater treatment. Desalination and Water Treatment, 57(31), 14453-14460.
 
58) Taghavi, S., Mohammadi, F., &Barzin, J. (2016). Ionic Polymer-Metal Composites (IPMC) from recycled Flemion® membrane used in chlor-alkali industry. Scientia Iranica. Transaction C, Chemistry, Chemical Engineering23(3), 1117.
 
59) M. Kazemi Ashtiani, M. Zandi*, J. Barzin, Y. Tahamtani, M. Hossein Ghanian, A. Moradmand, M. Ehsani, Substrate-mediated commitment of human embryonic stem cells for hepati differentiation, Journal of Biomedical Materials Research Part A, 2016.
 
60) Vahedi M., Barzin J., and Kowsari M., Fabrication of polyethersulfone-Based symmetric Membrane by Applying pause stage in coagulation, Iran. J. Polym. Sci. Technol, 28(5), 421-436, 2016.
 
61) Pazokian, H., Mehrabadi, A. H., Barzin, J., and Mollabashi, M. (2016). Controlling the porosity of a polyethersulfone membrane surface with an XeCl laser. Laser Physics26(3).
62) Jafari-Nodoushan, M., Barzin, J., & Mobedi, H. (2016). A stability-indicating HPLC method for simultaneous determination of morphine and naltrexone. Journal of Chromatography B1011, 163-170.
63) Faramarzi, A. R., Barzin, J., and Mobedi, H. (2016). Effect of solution and apparatus parameters on the morphology and size of electrosprayed PLGA microparticles. Fibers and Polymers17(11), 1806-1819.
64) Khorsand-Ghayeni, M., Barzin, J., Zandi, M., & Kowsari, M. (2017). Fabrication of asymmetric and symmetric membranes based on PES/PEG/DMAc. Polymer Bulletin74(6), 2081-2097.
65) L. Mohammadi Amirabad, M. Massumi,* M. Shamsara,* I. Shabani, A. Amari, M. Mossahebi Mohammadi, S.Hosseinzadeh, S. Vakilian, S. K. Steinbach, M. R. Khorramizadeh, M. Soleimani, J. Barzin, Enhanced Cardiac Differentiation of Human Cardiovascular Disease Patient-Specific Induced Pluripotent Stem Cells by Applying Unidirectional Electrical Pulses Using Aligned Electroactive Nanofibrous Scaffolds, ACS Appl. Mater. Interfaces, 2017.
66) Saeed, S. M., Mirzadeh, H., Zandi, M., &Barzin, J. (2017). Designing and fabrication of curcumin loaded PCL/PVA multi-layer nanofibrous electrospun structures as active wound dressing. Progress in biomaterials6(1-2), 39-48.
67) Faramarzi, A. R., Barzin, J., & Mobedi, H. (2017). Producing PLGA fine particles containing high magnetite nanoparticles by using the electrospray technique. Journal of Polymer Research24(1), 13.
68) Alavijeh, R. Z., Shokrollahi, P., Barzin, J. (2017). A thermally and water activated shape memory gelatin physical hydrogel, with a gel point above the physiological temperature, for biomedical applications. Journal of Materials Chemistry B5(12), 2302-2314.
69) Ranjbarzadeh-Dibazar, A., Barzin, J., & Shokrollahi, P. (2017). Microstructure crystalline domains disorder critically controls formation of nano-porous/long fibrillar morphology of ePTFE membranes. Polymer121, 75-87.
70) Shahrabi, S. S., Mortaheb, H. R., Barzin, J., and Ehsani, M. R. (2017). Nanoporous Polyether Sulfone Membrane, Preparation and Characterization: Effect of Porosity and Mean Pore Size on Performance. Journal of Membrane and Separation Technology6(2), 71-84.
71) A. R. Faramarzi ,J. Barzin, H. Mobedi,Iron Oxide Loaded PLGA Particles for Contrast Enhancement in Magnetic Resonance Imaging (MRI), Global Journal of Pharmacy & pharmaceutical Science, 2017.
72) S. E. Maleki, P. Shokrollahi, J. Barzin, Impact of supramolecular interactions on swelling and release behavior of UPy functionalized HEMA‐based hydrogels, Polymers for Advanced Technologies, 2018.
73) Shahrabi, S. S., Barzin, J., and Shokrollahi, P. (2018). Blood cell separation by novel PET/PVP blend electrospun membranes. Polymer Testing66, 94-104.
74) Vahedi, M., Barzin, J., Shokrolahi, F., & Shokrollahi, P. (2018). Self‐Healing, Injectable Gelatin Hydrogels Cross‐Linked by Dynamic Schiff Base Linkages Support Cell Adhesion and Sustained Release of Antibacterial Drugs. Macromolecular Materials and Engineering, 1800200.
75) Barzin, J., Safarpour, M., Kordkatooli, Z., & Vahedi, M., Improved microfiltration and bacteria removal performance of polyethersulfone membranes prepared by modified vapor‐induced phase separation. Polymers for Advanced Technologies, 2018.
76) S. Salehi Shahrabi, J. Barzin, P. Shokrollahi, Statistical approach to estimate fiber diameter of PET/PVP blend electrospun using Taguchi method and fitting regression model, Materials Research Express, 2019.
77) Mahdie Safarpour, Jalal Barzin, Alireza Khataee, Zahra Kordkatooli, Two‐stage phase separation of cellulose acetate membranes modified with plasma‐treated natural zeolite: Response surface modeling, Polymers for Advanced Technologies, 2019.
78) Saeid Karimi, Azadeh Ghaee, Jalal Barzin, (2019), Preparation and characterization of a piezoelectric poly (vinylidene fluoride)/nanohydroxyapatite scaffold capable of naproxen delivery. European Polymer Journal, 112, 442-451.
79) سکینه خزلی، مژگان زندی، جلال برزین. مروری بر بستر های نانو لیفی الکتروریسی شده بر پایه پلی اتر سولفون برای کاربرد غشایی. بسپارش، شماره مجله 4، 1394.
80) محمدحسین قانیان؛ جلال برزین؛ مژگان زندی؛ مرتضی احسانی؛ محمد کاظمی آشتیانی. کنترل آرایش نانوالیاف الکتروریسی شده با استفاده از جمع کننده‌های ترکیبی رسانا- عایق. بسپارش، شماره مجله 2. 1393.
 

Conference Papers:
1)Jalal Barzin., S.S. Madaeni and H.Mirzadeh., Effect of Polyvinylpyrrolidone (PVP) on Hemodialysis Performance of Flat membranes Prepared from Polyether Sulfone (PES). 7th Iranian Chemical Engineering Congress (IChEC 2002), October 27-29, Tehran University, Tehran, Iran (Ranked Excellent).

2) Jalal Barzin., C. Feng, K.C. Khulbe, T. Matsuura, S.S. Madaeni and H.Mirzadeh, Characterization of polyethersulfone hemodialysis membrane by ultrafiltration and atomic force microscopy.
5th International Membrane science and Technology Conference (IMSTEC ‘03) November 10-14, 2003 Sydney, Australia.

3) Jalal Barzin., S. S. Madaeni and H.Mirzadeh, Effect of Preparation Conditions on Morphology and Performance of Hemodialysis Membranes Prepared from Polyether Sulfone (PES) and Polyvinylpyrrolidone (PVP)Euromembrane ‘04, September 27- October 1, 2004 Hamburg, Germany.

4) Jalal Barzin., S.S. Madaeni.and H.Mirzadeh., Effect of Polyvinylpyrrolidone (PVP) on Support layer Morphology of Flat membranes Prepared from Polyether Sulfone (PES), 9th Iranian Chemical Engineering Congress (IChEC2004),23November2004,Tehran, Iran.

5) Madaeni S.S., Rahimpour A. and Barzin J, Effect of acetone on morphology and performance of polysulfone ultrafiltration membranes for milk concentration, 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.

6) Jalal Barzin., S.S. Madaeni.and H.Mirzadeh., “Effect of Polyvinylpyrrolidone (PVP) on Support layer Morphology of Flat membranes Prepared from Polyether Sulfone (PES)” 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.

7) Madaeni S.S., Rahimpour A. and Barzin J., “Preparartion of Polysulfone Ultrafiltration Membranes for Milk Concentration: Effect of acetone on morphology and performance of polysulfone ultrafiltration membranes for milk oncentration”. 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.

8) Jalal Barzin., H.Mirzadeh ., S.S. Madaeni. and T. Matsuura., “Hollow Fiber Hemodialysis Membranes Prepared from Polyethersulfone and Polyvinylpyrrolidone”. Engineering with Membranes, Medical & Biological Application, (EWM 2005) , May 15-18, Cambogli-Portofino, Italy.

9) Jalal Barzin., S.S. Madaeni., H.Mirzadeh., T. Matsuura., C. Feng and K.C. Khulbe, “Heat treated polyethersulfone-polyvinylpyrrolidone hollow fiber membrane for hemodialysis application”. International Congress on Membrane and Membrane Processes 2005 (ICOM 2005) August 21-26, 2005 Seoul, Korea.

10) Jalal Barzin., H.Mirzadeh ., S.S. Madaeni. and T. Matsuura., “Hollow fiber Membranes Prepared from Polyether Sulfone and Polyvinylpyrrolidone for Hemodialysis Application” 5th IBERO American Congress on Membrane Science and Technology (CITEM 2005), July 6-8, 2005, Valencia, Spain.

11) Jalal Barzin., S.S. Madaeni, H.Mirzadeh. and T. Matsuura., “Polyether Sulfone / Poly( vinyl pyrrolidone)Hollow Fiber Membranesfor Hemodialysis Application”
The 4th International Seminar on Polymer Science and Technology (ISPST2005), September 27-29, 2005, Tehran, Iran.( Ranked between the first 5 excellent papers of more than 400 oral and poster papers).

12) S. S. Madaeni, A. Rahimpour and J. Barzin.,”Effect of Formamide on Morphology and Performance of Polysulfone Ultrafiltration Membranes for Milk Concentration. The 4th International Seminar on Polymer Science and Technology (ISPST2005), September 27-29, 2005, Tehran, Iran.

13) Jalal Barzin, H.Mirzadeh, S.S. Madaeni and T. Matsuura., “Preparation and Modification of Polyethersulfone – Polyvinyl pyrrolidone Hollow Fiber Membranes for Hemodialysis”. 10th Iranian Chemical Engineering Congress (IChEC 2005), November 15-17, Zahedan, Iran.

14) Jalal Barzin, S.S. Madaeni and S.Poormoghadasi., “Fabrication of Polyvinyl alcohol and Polyether sulfone hemodialysis membranes and comparison of their performance and morphological characteristics”. Advance Membrane Technology, June 11-6, 2006, Cetraro Italy.

15) S.S.Madaeni, M.Esmaeili1 and Jalal Barzin., “Manufacturing polyamide composite membranes via interfacial polymerization for air separation at low pressures”.,11th Iranian Chemical Engineering Congress (IChEC 2006), November 28-30, Tehran, Iran.

16) Jalal Barzin, B.Sadatnia and H.Mirzadeh., "Correlation between theoretical phase diagram and membrane morphology for water/solvent/polyethersulfone systems.The 8th International Seminar on Polymer Science and Technology, (ISPST2007),Oct 23-25, Sharif University, Tehran, Iran .

17) J.Barzin , S. S Madaeni, M. Esmaeili1, Preparation of PES composite membrane using some glassy polymers active layer for air separation, The 8th International Seminar on Polymer Science and Technology (ISPST2007), Oct 23-25, Sharif University, Tehran, Iran .

18) S.S.Madaeni, M.Esmaeili1 and Jalal Barzin ." Applying some kinds of glassy polymers as active layer of composite membranes for air separationThe 4th International Seminar on Polymer Science and Technology (ISPST2007), Oct 23-25, Sharif University, Tehran, Iran.

19) Jalal Barzin., H.Mirzadeh , S.S. Madaeni and T. Matsuura, Modification of Hemodialysis Hollow Fiber Membrane Prepared from PolyetherSulfone and Polyvinyl Pyrrolidone, 6th International Membrane science and Technology Conference (IMSTEC ‘07) November 5-9, 2007 Sydney, Australia.
 
20) A. Mota, A. S. Lotfi, Jalal Barzin, M. Maasumi, M. Hatam, B. Adibi, Z. Khalaj "RGD Modified PCL/Gelatin Hybrid Nanofiber for Potential Applications in Tissue Engineering "8th Royan International Congress on Stem Cell Biology & Technology, 5-7 September 2007, Tehran, Iran.
21) A.Abarghooee., Jalal Barzin., A.Jamshidi and T.Khorasani ," Surface Modification of PES Hemodialysis Membrane for Reduction of Protein Fouling and Platelet Adhesion by Plasma , 14th Iranian conference on biomedical engineering(ICBME2008), Feb 13-14, Shahed University, Tehran, Iran.

22) M.Esmaeili1., S.S.Madaeni,m and Jalal Barzin., “Effects of glassy polymers as active layer of polyethersulphone membranes for optimisation of air separation process at low pressures”.13th Iranian Chemical Engineering Congress (IChEC 2008), October 2-23, Tabriz, Iran.

23) B.H. Gholizadeh, , A.Arefazar and JalalBarzin, "Morphology and gas permeability of polymeric membrane by PC/ PA6/ ternary nanocomposite" 7th international conference on ,embrane science and technology (MST 2009), May 13-15, Kuala lumpur , Malaysia.

24) A.Ghaee., M.Shariaty- Niasar, and Jalal Barzin., "The effect of chitosan membrane preparation parameters on removal of copper ions" 7th international conference on ,embrane science and technology (MST 2009), May 13-15, Kuala lumpur , Malaysia.

25) B.Sadatnia and Jalal Barzin, Thermodynamic evaluation of quaternary membrane-forming system of water/NMP/PES/PV. The 9th International Seminar on Polymer Science and Technology (ISPST2009),

26)M.Esmaeili1., Jalal Barzin and S.S.Madaeni,., Evaluation the structural changes of PVP composite membranes as a function of salt addition for facilitated transport process. The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran.

27) H.Pazppkian, Jalal Barzin, M.Mollabashi, S.Jelvani and Z.Zamanipour. ArF Laser Treatment of Polyethersulfone Films. The 9th International Seminar on Polymer Science and Technology (ISPST2009),Oct 17-21, Tehran, Iran.

28) A.Ghaee., M.Shariaty-Niasar and Jalal Barzin. Chitosan membrane performance, prepared by immersion-precipitation method. The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran.

29) A.AbarghooeeJalal Barzin., A.Jamshidi and T. Khorasani Biocompatibility study of CO2 plasma treated PES membranes. The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran.

30) A. Soroush, Jalal Barzin, and M. Barikani, Investigation the structural variation of interfacially polymerized thin film composite membranes, The 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran.

31) H.Farokhzad,A.Poorkhalil,Jalal.Barzin, A.Mashak,and H.Mobedi, The study of GPC conditions on molecular weight determination of poly(lactide-co-glycolide) 9th International Seminar on Polymer Science and Technology (ISPST2009), Oct 17-21, Tehran, Iran.

32) Jalal Barzin, S.S.Madaeni and S. Poormoghadasi, Effect of polyethylene glycol on morphology and performance of Polyvinyl Alcohol hemodialysis Membranes , Euromembrane ‘09,6-10 September , Montpellier, France.

33) Esmaeili M. , Barzin J. , Madaeni S.S., Morphological Analysis of PVP Composite Membranes for Facilitated Transport Process, 6 th Internatinal Chemical Engineering Congress & Exhibition, (IChEC 2009), Nov 16-20, Kish Island, Iran.

34) A.Ghaee., M.Shariaty- Niasar, and Jalal Barzin., "The influence of membrane preparation parameters on chitosan membrane morphology" 6th International Chemical Engineering Congress (IChEC 2009), Nov 16-20, Kish Island, Iran.

35) M.Esmaeili, S.S.Madaeni, J.Barzin, N.Yousefimehr, Preparation and investigation of defect free PES/PVP composite membranes for ethylene recover process, 1389.

36) Soosan Mokhtari, shaghayegh Baghapoorm Parviz Parvin, Ahmad Amkadi, Jalal Barzin, The effect of incoherent ultraviolet light on the renal capsule tissue using danamic mechanical analysis and FTIR sperctroscopy.

37) M..Esmaeili., S.S.Madaeni, Jalal Barzin and N.Yousefimehr “Evaluation of morphology and performance pf PES/PVP composite membrane for ethylene recovery process..2th national convention on Fule, Energy and Environment (2010), May,19-20, Kermanshah, Iran.

38) Terraf, Panieh, Safi, Mojtaba, Barzin, Jalal, Masumi, Mohammad, "Do matrigel – embedded transgenic mouse embryonic Es cells cultured on electro spun PLGA – PCL scaffolds Efficiently differentiate to dopaminergic neurons?" 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.

39) Massuni, Mohammad, Tarraf, Pania, Babaloo, Hamideh, Safi, Mojtaba, Abasi, Mozhgan, Divsalar, Adele, Saeed, Mehdi, Barzin, Jalal, "Combined influences of matrigel and electrospun PLGA nanofibrous scaffolds on differentiation of plutipotent mouse embryonic stem cells." 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.

40) F. Alipour, J. Barzin, S. Moradi, "Effect of coagulation bath temperature on morphology and performance of PES – Aerosil nano particle ultrafiltration membranes." Asia/Australia Regional Meeting (PPS 2011), Kish Island, Iran. P–6-54.

41) F. Alipour, J. Barzin, S. Moradi, "Effect of Delay time on morphology and performance of PES ultrafiltration membrane prepared by PES/SiO2/DMAC" Asia/Australia Regional Meeting (PPS 2011), Kish Island, Iran. P–6-55.

42) Babaloo, Hamideh, Abasi, Mozhgan, Riazi, Ghoamhossein, Barzin, Jalal, Massumi, Mohammad, "Can beta – boswellic acid synergize derivation of dopaminergic neuron from mouse embryonic Es cells cultured on matrigel coated electro spun PLAGA/PLC nanofibrous scaffold." 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.

43)Ali Haghighat Mesbahi, Elham Khakrah, Saied Nouri Khorasani, Jalal Barzin, Hamid Mobedi, "Investigating Expert system parameters on modeling performance of release behavior form an injectable in situ forming Drug Delivery system" Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.
 
44)Ali Haghighat Mesbahi, Dariush Semnani, Jalal Barzin, Hamid Mobedi,"Investigating Expert system parameters on modeling performance of in situ forming controlled Drug Delivery system" Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.
 
45)Ali Haghighat Mesbahi , Saeid Nouri Khorasani, Jalal Barzin, Hamid Mobedi, Dariush Semnani, "Performance prediction of in situ forming controlled drug delivery system by Adaptive Neuro-Fuzzy Inference System (ANFIS), Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.
 
46) M.H. Ghanian, J. Barzin, M. Zandi .M. Ehsani,H. Baharvand  M. Kazemi-Ashtiani, Optimizing topographical features of electrospun nanofibers for efficient endodermal differentiation of human induced pluripotent stem cells, 10th  Annual Meeting International Society for Stem Cell Research (ISSCR), June 13-16, Japan, Yokohama, PACIFICO Yokohama.

44) M.H. Ghanian., M. Zandi.,Jalal Barzin.,M.Ehsani.,M.Kazemi-Ashtiani and H.Baharvand "Reducing Diameter and Variability of Electrospun Poly ( -Caprolactone)Nanofibers Using Charged Additives " 14th Iranian National Chemical Engineering Congress (IChEC 2012), Oct 16-18, Tehran, Iran.

45)M.Jafarinasab.,JalaBarzin.,H.Mobedi.,H.Mortaheb.,GH.SalehiJouzani.,S.Abbasalizadeh "Effect of Surface Roughness on the Pervaporative Performance of PDMS/PES Composite Membranes for Ethanol/Water Separation " 14th Iranian National Chemical Engineering Congress (IChEC 2012), Oct 16-18, Tehran, Iran.

46) P. Jafari, M. Keshavarz Moraveji, Jalal Barzin, Gh. Salehi Jouzani, S. Abbasalizadeh
Simulation of the Composite Pervaporation Membrane Performance in the Separation of Ethanol from Water by Computational Fluid Dynamics (CFD)" 14th Iranian National Chemical Engineering Congress (ICHEC 2012), Oct 16-18 Tehran, Iran.

47) P. Jafari, M. Keshavarz Moraveji, Jalal Barzin, Gh. Salehi Jouzani, .Abbasalizadeh," Application of Response Surface Method (RSM) in the Optimization of the Composite Pervaporation Membrane Performance in the Separation of Ethanol From Water” 14th Iranian National Chemical Engineering Congress (ICHEC 2012), Oct 16-18 Tehran, Iran.

48) M.H.Ghanian.Jalal Barzin.,M.Zandi.,M.Ehsani.,M.Kazemi-Ashtiani and H.Baharvand "Fabrication of Uniform Electrospun Poly (?-caprolactone) Microfibers Using Cationic Surfactant" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

49) M.Kazemi-Ashtiani., M.Zandi .,Jalal Barzin., M.H.Ghanian and H.Baharvand "Surface Functionalization and Characterization of Electrospun Polycaprolactone Nanofibers for Biomedical Application" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

50) M.Jafari-Nodoushan., H.Mobedi and Jalal Barzin "Monitoring the Effect of Flow rate on Size and Morphology of Microspheres Produced by the Means of Electrospraying Method" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

51) M.Jafari-Nodoushan., T.Ebrahimi., Jalal Barzin and H.Mobed i "Evaluation of Naltroxone Release Kinetic from In Situ-Forming Drug Delivery System (Investigation the Effect of Polymer End Group Functionality)" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

52) M.Jafari-Nodoushan., T.Ebrahimi., H.Mobedi and Jalal Barzin "Effect of Polymer Blending on Morphology and Initial Burt Release of an in Situ-Forming Drug Delivery System" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

53) S.Taghavi., F.Mohammadi and Jalal Barzin "Ionic Polymer-metal composites (IPMC ) from a recycled Flemion membrane" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

54) M.Jafari-Nodoushan., Jalal Barzin., H.Mobedi. H.Mortaheb., GH.SalehiJouzani and S.Abbasalizadeh "Effect of PDMS viscosity on the Pervaporative Performance of PDMS/PES composite membranes for ethanol/water separation" The 10thInternational Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

55) M.S.Amini-Fazl.,H.Mobedi and Jalal Barzin "Controlled Release of Paclitaxel From In situ-Forming PLGA Gel" The 10thInternational Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

56) P.Jafari., Jalal Barzin., Gh.Salehi Jouzani., M.Keshavarz Moraveji and S.Abbasalizadeh "Optimization of PDMS/blended PES Composite Membrane Performance by Response Surface Methodology" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

57) P.Jafari., M.Keshavarz Moraveji., Gh.Salehi Jouzani.,Jalal Barzin and S.Abbasalizadeh "Pervaporative Separation of Ethanol/Water Mixture Using PDMS/blended PES Composite Membrane: CFD Simulation" The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.
 
58) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, KrF and XeCl Laser Induced Ripples on a Polyethersulfone Film, XIX International Symposium on High-Power Laser Systems and Applications 2012 ISTANBUL,
59) A. Ghaee, M. Shariaty-Niassar, J. Barzin, , A, Fauzi Ismail, Chitosan/Polyethersolfone Composite Nanofiltration Membrane for Removal Heavy Metal from Wastewater, The 11th International Conference on Membrane Science & Technology,Kuala Lampur, Malaysia, 27-29 Aug, 2013
60) A. Ghaee, M. Shariaty-Niassar, J. Barzin, T. Matsuura, A. Fauzi Ismail, Synthesis and Application of Chitosan/Cellulose Acetate Coposite Membranes for Copper Ions Removal From Wastewater, The 11th International Conference on Membrane Science & Technology,Kuala Lampur, Malaysia, 27-29 Aug, 2013.
61) Sh. Tohidi, J. Barzin, A. Ghaee, Preparation and evaluations of electrospun poly (lactic-co-glycolic acid)/Chitosan composite nanofibrous for wound dressing applications, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
62) K. Khadem, J. Barzin, H. Pazokian, M. Mollabashi, K.Silakhor, Surface modification of polyethersulfone membrane by ArF lase fohydrophilicity improvement, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
63) M. Vahedi, J. Barzin, Effect of Temperature and Solvent Evaporation Delay Time on the Structure of PES Flat Sheet Membrane, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute(IPPI).
64) R. sadat Eshraghi Naeeni, G. Amoabediny, A. Ghaee, J. Barzin, Effect of polyethylene glycol concentration as an additive on performance of polyether sulfone dialysis membranes, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
65) M. Jafarinasab, J. Barzin, H. Mobedi, H. Mortaheb, G. Salehi Jouzani, S. abbasalizadeh, Effect of Surface Nodular Structure on the PDMS/PES based Membranes Pervaporative Performances in Ethanol / Water Separation, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute(IPPI).
66) B. Sadatnia, F. Mohammadi,* J. Barzin, Preparation and characterization of PPO/ZIF-8mixed matrix membranes for propylene/propane separations, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
67) S. khezli, M. Zandi, J. Barzin, Effect of solvent system and environmental conditions on the electro spinning of Poly(ether-sulfone), 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute(IPPI).
68) Y. Hamedani, N. Fazeli, J. Barzin, Investigation of Electro-spun PLGA/Lidocaine fibers, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
69) Y. Hamedani, J. Barzin, N. Fazeli, Investigation of drug release in sandwich structured PLGA-Lidocain/Gelatin-SSD/PLGA electro-spun fibers, 11th International Seminar on Polymer Science and Technology (ISPST 2014) ,Iran Polymer and Petrochemical Institute(IPPI).
70) A. Ranjbarzadeh Dibazar, P. Shokrollahi, A. Rahimi, J. Barzin, An investigation on Shrinkability of ePTFE Membrane Through Uniaxial Stretching, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
71) M. Jafari-Nodoushan, J. Barzin, H. Mobedi*, Microsphere Embedded Matrix: a New Method for Drug Co-Therapy, ,11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
72) M. Khorsand, J. Barzin, M. Zand, Achieve to Asymmetric Polyethersulfone (PES) Membrane by Combined Phase Separation Method, ,11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
73) A. Hashemipanah, H. Pazokian, M. Mollabashi, J. Barzin, A. Tabatabaei, XeCl Laser Irradiation of PES/PVP Membranes, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
74) F.Banihashemi, H. Mobedi, J. Barzin, Investigation of effect of various drug loading and addition of a rate modifying agent on famotidine release from in situ forming implants, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute(IPPI).
75) M. Jafari-Nodoushan, H. Mobedi, J. Barzin‎, Electrospraying: A Tuneable Method of Microparticle Production, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014
76) M. Jafari-Nodoushan, J. Barzin, H. Mobedi, Design of a Combined Morphine Delivery System (Morphine Microsphere- ‎Embedded In-Situ Forming), The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014
77) M. S. Amini-Fazl, H. Mobedi, J. Barzin, H. Abedini, Incorporation of HAS Microparticles within the Taxol-Loaded In situ Forming PLGA ‎Microspheres: Drug Release, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014
78) Y. Hamedani, N. Fazeli, J. Barzin, Investigation of Drug Release in Gelation/Silver Sulfadiazine Electro-spun Fibers ‎, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014.
79) M. Jafarinasab, J. Barzin, H. Mobedi, H. R. Mortaheb, G. R. Salehi Jouzani, S. ‎Abbasalizadeh, Design of Support Layers based on PES Membrane to Improve the Permeability ‎Performance, The 8th International Chemical Engineering Congress & Exhibition (IChEC 2014) Kish, Iran, ‎‎24-27 February ‎

80) A. Mota, S. Lotfi, Jalal Barzin, M. Maasumi, M. Hatam, B. Adibi "Fabrication of PCL/Gelatin Hybrid Nanofibrous Scaffold Functionalized with Collagen IV-Derived RGD Peptide"5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.

81) M. H. Ghanian, Jalal Barzin, M. Zandi, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand " Nanofibrous Scaffolds with In Situ Pore Extension Potential"5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.

82) Sh. Tohidi, A. Ghaee, Jalal Barzin, "Electrospinning and Characterization of Chitosan Nanofibrous for Wound Dressing Application "22nd Iranian Seminar of Organic Chemistry,19-21 August 2014, Tabriz, Iran.
83) M. Vahedi, Jalal Barzin"Effect of Polymer Concentration and Temperature of Delay Stage on the Structure of PES Membrane"Iran Membrane, 20-21 May 2015, Tehran, Iran.
84) A. Ranjbarzadeh, Jalal Barzin, P. Shokrollahi " Crystal/Morphology Correlation in the PTFE Membranes "Iran Membrane, 20-21 May 2015, Tehran, Iran.
85) A. Homavand, M. Moghiseh, Jalal Barzin"Effect of Solvent Type on Structure of Cellulose Acetate Membranes"Iran Membrane, 20-21 May 2015, Tehran, Iran.
86) M. Moghiseh, A. Homavand, J. Barzin "Effect of Cellulose Acetate and Polyvinylpyrrolidone Concentration on Membrane Structures"Iran Membrane, 20-21 May 2015, Tehran, Iran.
87) Sh. Tohidi, A. Ghaee, Jalal Barzin"Evaluations Effect of Concentration and Electrospinning Parameters on Electrospun Poly(D,L Lactic co-glycolic acid) Nanofibers "22nd Iranian Seminar of Organic Chemistry,19-21 August 2014, Tabriz, Iran.
88)S. M. Saeed, H. Mirzadeh, M. Zandi, Jalal Barzin"Preparation and Evaluation of Electrospun (Polycaprolactone/Pegylated Curcumin) Hybrid as Wound Dressing"International Conference & Exhibition on Advanced & Nano Materials (ICANM), 10-12 August 2015, Ottawa, Canada.
89)M. Khorsand, Jalal Barzin, M. Zandi "Porous Poly Ether Sulfone Composite Membrane with Highly Symmetric Interconnected Pores Structure"International Conference & Exhibition on Advanced & Nano Materials (ICANM), 10-12 August 2015, Ottawa, Canada.
90) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, Laser Surface Modication of Polyethersulfone Films: Effect of Laser Wavelength on Biocompatibility, 21st International Laser Physics Workshop Canada.
91) B. Sadatnia, F. Mohammadi, J. Barzin, A. Ghadimi, Preparation and characterization ofPEBA/ZIF-8mixedmatrix membranes for propylene/propane separations, The 12th International Conference on Membrane Science and Technology MTS 2015, 1-3 November 2015.
92) Karimi S., Ghaee A., Barzin J., Improving the permeability of PVDF membranes by incorporating β-cyclodextrin modified silica nanoparticles, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November2015.
93) Moghiseh M., Homavand A., Barzin J., Investigation of preparation parameters on cellulose acetate membrane structures, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November2015.
94) Homavand A., Moghiseh M., Barzin J., Morphological study of cellulose acetate membranes based on hydrophilic additives, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November2015.
95) Vahedi M., Barzin J., effects of delay time and relative humidity in coagulation process on the structure of PES membranes, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November2015.
96) Sadatnia B., Mohammadi F., Barzin J., Ghadimi A., preparation and characterization of PEBA/ZIF-8 mixed matrix membranes for propylene/propane separations, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November2015.
97) A. Faramarzi, J. Barzin, H. Mobedi, Processing Parameters of Electrosprayed Fe3O4 Loaded PLGA Nanoparticles for Utilizing in M.R.I, 14th Iranian Pharmaceutical Science Congress & 1st Symposium of Biopharmaceutics and Pharmacokinetics.
98) A. R. Faramarzi, J. Barzin, H. Mobedi, Characterization of magnetic PLGA nanofibers fabricated by electrospinning technique for hyperthermia and MRI, The 2nd Iranian Nanomedicine Congress 2016 (INMC 2016).
99) A. R. Faramarzi, J. Barzin, H. Mobedi, SIZE AND MORPHOLOGY VARIATION OF ELECTROSPRAYED CONTRAST AGENT LOADED PLGA MICROPARTICLES, The 2 nd Iranian Nanomedicine Congress 2016 (INMC 2016)
100) A. Ranjbarzadeh-Dibazar, J. Barzin , P. Shokrolahi, EXPANDED PTFE MEMBRANE PREPARATION FOR VASCULAR PROSTHESIS, XLIII Annual Congress of the European Society for Artificial Organs.
101) M. Mohseni Moghaddam, P. Shokrollahi, J. Barzin, SYNTHESIS OF nZnHApUPy FOR BONE TISSUE ENGINEERING APPLICATIONS, XLIII Annual Congress of the European Society for Artificial Organs.
102) S. Maleki Esfandabadi, P. Shokrollahi, J. Barzin, SYNTHESIS OF A SUPRAMOLECULAR HEMA HYDROGEL, XLIII Annual Congress of the European Society for Artificial Organs.
103) M. Mohseni, P. Shokrollahi, J. Barzin, SYNTHESIS AND CHARACTERIZATION OF n-ZnHAp-UPy FOR BONE TISSUE ENGINEERING APPLICATIONS, 12th International Seminar on Polymer Science and Technology.
104) R. Zamani, P. Shokrollahi, J. Barzin, The effect of solvents system, medium cooling, syringe heating on electrospinning of supramolecular polycaprolactone, 12International Seminar on Polymer Science and Technology
105) M. Vahedi, J. Barzin, F. Shokrolahi, P. Shokrollahi, Synthesis of Chitosan-Based Hydrogel with Simply Mixing Preparation Approach, 12International Seminar on Polymer Science and Technology.
106) A. Ranjbarzadeh, J. Barzin, P. Shokrollahi, Expanded PTFE Design for Guided Bone Regeneration Membranes, 12International Seminar on Polymer Science and Technology.
107) B. Sadatnia, J. Barzin, A. Soroush, Evaluating the role of thermodynamic and kinetic properties on the morphology of membranes prepared from water/DMAc/PES/PVP, 12th International Seminar on Polymer Science and Technology.
108) B. Sadatnia, F. Mohammadi, J. Barzin, Poly(2,6-dimethyl-1,4-phenylene oxide)/zeolitic imidazolite framework-8 mixed matrix membranes for olefin/paraffin separations, 12th International Seminar on Polymer Science and Technology.
109) S. Salehishahrabi , J. Barzin, P. shokrollahi, Effect of processing condition and polymer concentration on manufacturing of PET/ PVP fibrous membrane, 12th International Seminar on Polymer Science and Technology.
110) A. R. Faramarzi, J. Barzin, H. Mobedi, Size and Morphology of Surfactant Capped Iron Oxide Nanoparticles Loaded in PLGA Fine Particles by Electrospraying, 12th International Seminar on Polymer Science and Technology.
111) A. R. Faramarzi, J. Barzin, H. Mobedi, Morphological Study of Magnetic Fibrous PLGA Biocomposites Produced by Electrospinning, The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5).
112) R. Dehghan, J. Barzin, Z. Kordkatooli, S. Mahdavi, Effect of Relative Energy Difference (RED) of coagulation bath on the structure of polysulfone membrane, 13th International Seminar on Polymer Science and Technology, Tehran, Iran.
113) R. Dehghan, J. Barzin,Simultaneous effect of low and high molecular weight of polyvinylpyrrolidone on the polysulfone ultrafiltration, The 16th Iranian National Congress of Chemical Engineering, Tehran, 2019.
114)پویا جعفری، مصطفی کشاورز مروجی، جلال برزین، غلامرضا صالحی جوزانی، سعید عباسعلیزاده، کاربرد روش سطح پاسخ(RSM) در بهینه سازی عملکرد غشای کامپوزیت در سیستم تراوش تبخیری برای جداسازی اتانول از آب، چهاردهمین کنگره ملی مهندسی شیمی ایران، دانشگاه صنعتی شریف، 25-27 مهرماه 1391.
115)پویا جعفری، مصطفی کشاورز مروجی، جلال برزین، غلامرضا صالحی جوزانی، سعید عباسعلیزاده، شبیه سازی عملکرد غشای کامپوزیت در سیستم تراوش تبخیری برای جداسازی اتانول از آب با استفاده از دینامیک سیالات محاسباتی(CFD)، چهاردهمین کنگره ملی مهندسی شیمی ایران، دانشگاه صنعتی شریف، 25-27 مهرماه 1391.
116) حسینایپکچی* ،مسعوداسفنده،امیرمسعودرضادوست،جلالبرزین، بررسياثرضدحلالروينانواليافالكتروريسيشدهپليوينيلبوتيرال (PVB)تانولباوزنمولكوليكم، دومین کنفرانس ملی نانو ساختارها، علوم و مهندسی
117) عادله هاشمي، هديه پازكيان، محمود ملاباشي، جلال برزين، آرش طباطبايي، كيانا خادم"اثر تابش‌دهي ليزر XeClروي ساختار شيميايي سطح غشاء پلي‌اتر سولفون"سومين كنفرانس ليزر و كاربردهاي آن، شهريورماه 1393، تهران، ایران.
118) كيانا خادم، هديه پازكيان، جلال برزين ، محمود ملاباشي، آرش طباطبايي"مطالعه تخلخل سطح و حجم غشاء پلي‌اتر سولفون با ليزر ArF"سومين كنفرانس ليزر و كاربردهاي آن، شهريورماه 1393، تهران، ایران.
119) كيانا خادم، جلال برزين ، محمود ملاباشي، هديه پازكيان، كاوه سيلاخوري"اثر ليزر ArF بر آبدوستي غشاء پلي‌اتر سولفون"سومين كنفرانس ليزر و كاربردهاي آن، شهريورماه 1393، تهران، ایران.
120) عبدالرحيم فرامرزي، جلال برزين ، حميد موبدي"كاربرد ريز ذرات پليمري زيست‌سازگار حاوي نانوذرات مغناطيسي به عنوان مواد حاجب در تصويربرداري MRI"نانو پزشكي در تشخيص و درمان بيماريهاي صعب‌العلاج، بهمن 1393، تهران، ایران.
121) عبدالرحيم فرامرزي، جلال برزين ، حميد موبدي"تهيه ريز ذرات پليمري زيست‌سازگار PLGAحاوي مگنتيت با هدف كاربرد در MRI"نانو پزشكي درتشخيص و درمان بيماريهاي صعب‌العلاج، بهمن 1393، تهران، ایران.
122) شبنم توحيدي، آزاده غايي، جلال برزين "ساخت و بهينه‌سازي نانوالياف الكتروريسي شده PLGA و كاربرد آن به عنوان زخم‌پوش"كنگره ملي كاربرد فناوري نانو در علوم پزشكي، اردیبهشت 1394، تهران، ایران.
123) عبدالرحيم فرامرزي، جلال برزين، حميد موبدي"تهيه و بررسي ريز ذرات پليمري توده شونده PLGA با كاربرد دارورساني به روش الكترواسپري"دومين همايش ملي غشاء و فرايندهاي غشايي،‌ اردیبهشت 1394، دانشگاه تهران، ایران.
124) شهلا مهدوی، جلال برزین، مهدیه صفرپور " بررسی ساختار غشای پلی سولفون/ پلی وینیل پیرولیدون با تغییر فرآیند جدایش فازی القا شده با ضدحلال " شانزدهمین کنگره ملی مهندسی شیمی ایران، دانشگاه صنعتی امیرکبیر، 1397.

 
  Patents:
 
1) Jalal Barzin, S.S. Madaeni and H.Mirzadeh.(2005)
Design and Preparation of lab-scale Polyether Sulfone Flat sheet Membranes for Hemodialysis process. Iran Patent, No 32720.

2) Jalal Barzin, S.S. Madaeni and H.Mirzadeh.(2005)
Design and Preparation of lab-scale Polyether Sulfone Hollow fiber Membranes for Hemodialysis process. Iran Patent, No 32721.

3) S.S.Madaeni, M.Esmaili and J.Barzin. (2007)
Manufacturing and evaluating the asymmetric and composite polyamide membranes based polyethersulphone for air separation at low pressures, Iran Patent, No 38688.

4) S.S.Madaeni, M.Esmaili and J.Barzin.(2007)
Manufacturing of composite membranes based polyethersulphone via immersion coating procedure for air separation at low pressures. Iran Patent, No 38689.

5) J. Barzin, H.Mirzadeh, and S.S. Madaeni (2007)
Introduce and identification of flat sheet membrane defects and removing methods Iran Patent, No 38745.

6) J. Barzin, H.Mirzadeh, and S.S. Madaeni (2007)
A novel method for reduction of platelet adhesion on hemodialysis membranes for high performance application. Iran Patent, No 38746.

7) J. Barzin, H.Mirzadeh, and S.S. Madaeni (2007)
Preparation and Modification of Polyether Sulfone Hollow fiber Hemodialysis Membranes for high performance. Iran Patent, No 38747.

8) J. Barzin, H.Mahdavi, and M. Kermani (2008)
Design and manufacture of automatic machine for hollow fiber collection. Iran Patent, No 52655.
9) J. Barzin, H.Mahdavi, and M. Kermani (2008)
Design and manufacture of spinneret die for hollow fiber production. Iran Patent, No 52656.

10) J. Barzin, H.Mahdavi, and M. Kermani (2008).
Design and manufacture of sorting machine for hollow fiber production. Iran Patent, No 52657.

11) M.Naeimi seresht, A. Karkhaneh and J.Barzin (2010)
Preparation of PDMS membrane for NaCl difiusion.

12) H.Farokhzad, H.Mobedi, J.Barzin and A. Poorkhalil (2010)
Preparaton of dental in situe nanocomposite drag delivery system ( In vitro study) Iran Patent, No 65351. 

13) J. Barzin, A. Ranjbarzadeh, P. Shokrollahi, A. Rahimi(2018).
Fabrication and characterization of PTFE membrane by use of oligomeric plastisizer with the boiling and degradation temperature upper than 150℃, Iran Patent, No 91043

14) J. Barzin, M. Jaafari-Nadoushan, H. Moubedi(2018)
Micro particles production devise by electrostatic sputtering, No 92792

15) J. Barzin, H. Mirzadeh, M. zandi, S. M. Saeid(2018)
Preparation of threelayer curcumin loaded wound healing by use of electrospray methods, No 88710.
 
 
Books:
 
1) J.Barzin and M. Esmaeili “ Membrane cleaning and renew methods “ ( in Persian), IPPI,2010.
2) Sustainable Membrane Technology for Energy, Water, and Environment, (Edited by Ahmad Fauzi Ismail and Takeshi Matsuura) Wiley, 2012 , Chapter 12
3) Faramarzi, A. R., Barzin, J., Mobedi, H., & Gorji, M. (2017). Polymeric pharmaceutical nanoparticles developed by electrospray. In Nanostructures for Novel Therapy (pp. 137-164).
4) Jafari-Nodoushan, M., Mobedi, H., & Barzin, J. (2015). Encapsulation via electrohydrodynamic atomization spray technology (Electrospray). Handbook of encapsulation and controlled release. CRC Press, Boca Raton, Florida.