Professor Mohammad Hosain Beheshty

(BSc., MSc, Ph.D.).

 
 
 

Iran Polymer and Petrochemical Institute (IPPI)
Tehran-Karaj Highway, 15km, Pajouhesh Science Park, Pajouhesh Blvd., PO Box 14975/112, Postal cod 1497713115, Tehran, Iran
Tel.: (+98 21) 48662425 & 88065641, Facsimile: (+98 21) 44787021-23
E-mail:  M.Beheshty@ippi.ac.ir   &  mh.beheshty@gmail.com
http://www.ippi.ac.ir/
http://scholar.google.com/citations?user=BATc3ukAAAAJ&hl=en

Personal Details:

Date of Birth: 30/6/1964 (1343/4/9 H.)
Place of Birth: Kashmar, Iran
Status: Married, Two children
Nationality: Iranian

Education:

B.Sc., Feb. 1987, in Polymer Engineering from:
   Amirkabir University of Technology, Polymer Eng. Department, Tehran, Iran 
M.Sc., Sept. 1991 in Polymer Engineering from:
   Amirkabir University of Technology, Polymer Eng. Department, Tehran, Iran
Ph.D., June 1997 in Polymer Composite Materials from:
   Department of Material Science and Engineering, Bath University, Bath, UK

 

 Interested Research Area:

- Polymer Thermoset Composites, Processing and Properties
- Prepregs; Science and Technology
- Polymer Nanocomposites

Professional and Executive Experience:

-          1997- Present, Full-time member of Academic staff in Iran Polymer and Petrochemical Institute, Tehran, Iran.

-          Sept. 1997-Nov. 2000, Head of Education Department & Director of Post Graduate Studies, Iran Polymer and Petrochemical Institute, Tehran, Iran

-          1998 - 2012, Member of Postgraduate and Research Committee, Iran Polymer and Petrochemical Institute.

-          Nov. 2000 – Oct. 2003, Head of Planning and Monitoring Department, Iran Polymer and Petrochemical Institute, Tehran, Iran.

-          October 2003- August 2010, Deputy Director in Research Affairs of Iran Polymer and Petrochemical Institute, Tehran, Iran.

-          December 2010 - December 2012, February 2015 - July 2018, Head of Composites Department, Iran Polymer and Petrochemical Institute, Tehran, Iran.

-          December 2012-2014 Head of Faculty of Polymer Processing, Iran Polymer and Petrochemical Institute, Tehran, Iran.

-          January 2014-January 2015, Deputy Director in Technology of Iran Polymer and Petrochemical Institute, Tehran, Iran.

-          Dec. 2000-2004, Technical Advisor, Tiva Polymer Co. (Composite Parts Manufacturer), Tehran, Iran.

-          Jana. 2003- Technical Advisor, Mashhad Sadra Co. (GRP Pipe Manufacturer), Mashhad, Iran.

-          Member of Editorial Board of;

Iranian Polymer Journal (www.springer.com/chemistry/polymer+science/journal/13726) and Iranian Journal of Polymer Science and Technology, (http://jips.ippi.ac.ir) and Journal of Science and Technology of Composites, in Persican (http://jstc.iust.ac.ir).

-          January 2013- Director-in-Charge of Iranian Journal of Polymer Science and Technology (in Persian)

-          2016- Chairman of Iran Composite Scientific Association (www.IranCSA.ir).

-          July 2018- Director of Natinal Megaprojects Center, Vice-Presidency for Science and Technology, Tehran, Iran

Honors:

- Distinguished academic member of IPPI, 2002.

- Distinguished Research Manager of MSRT, 2008.

Publications:

A.   Books

1.  MH Beheshty and AM Rezadoust, Fiber Reinforced Plastics (Polymer Composites), in Persian, Iran Polymer and petrochemical Institute, Tehran, 2005, 426 pages (reprinted 2012).

2. MH Beheshty, Phenolic Resins, in Persian, Iran Polymer Society, Tehran, 2007, 96 pages (reprinted 2009).

 

B.    Journal Papers

[1]          MH Beheshty and A Heidari, Science and Technology of Prepregs”, Iranian Journal of Polymer Science and Technology (in Persian), 3, No. 1, 1990, 34 –47.

[2]          M Akbarian and MH Beheshty, “Structural Foams”, Iranian Journal of Polymer Science and Technology (in Persian), 4, No. 1, 1991, 30-40.

[3]          A Aref-Azar and MH Beheshty, “Effect of Coupling Agents on the Properties of Phenolic Moulding Compounds”, Amirkabir Journal of Science and Technology, (in Persian), 6, No. 24, 1994, 310-315.

[4]          SA Hashemi and MH Beheshty, “Effect of Silane Coupling Agents on Glass Fibre Reinforced Phenolic Composites”, Iranian Journal of Polymer Science and Technology (in Persian), 7, No. 2, 1994, 105-112.

[5]          MH Beheshty and B Harris, “A Constant-life Model of Fatigue Behaviour for Carbon-Fibre Composites: the Effect of Impact Damage”, Composite Science and Technology, 58, 1998, 9-18.

[6]          MH Beheshty, B Harris and T Adam, “An Empirical Fatigue-life Model for High-performance Fiber Composites with and without Impact Damage”, Composites Part A, 30, 1999, 971-987.

[7]          MH Beheshty, “Trends in Polymer Composites”, The newsletter of Iran Polymer Society, No. 3, 1999, 18-21.

[8]          MH Beheshty, B Harris, “Post-impact Fatigue Response of Carbon-Fibre-Reinforced Plastics”, Payam-e Bavar, Journal of Engineering, No. 11 and 12, 1999, 2-9.

[9]          V Nassehi, SA Hashemi and MH Beheshty, “A Numerical Method for the Determination of an Effective Modulus for Coated Glass Fibres Used in Phenolic Composites”, International Journal of Engineering, 13, No. 3, 2000, 1-10.

[10]          MH Beheshty, SK Afzaly and G Naderi, The Compounding of Phenolic – Nitrile Blends (The Role of Additives), Payam-e Bavar, Journal of Engineering, No. 16, Summer 2000, 15-25.

[11]          A Fasihi Dastjerdi and MH Beheshty, “Determination of Injection Port and Vent Locations of Hollow Tubes by RTM; Experimental and Computer Simulation” Iranian Journal of Polymer Science and Technology (in Persian), 13, No. 4, 2001, 201-210.

[12]          A Fasihi Dastjerdi, MH Beheshty and H Rahimi, “A Theoretical and Experimental Study of the Mould Filling Time in Resin Transfer Moulding” Iranian Journal of Polymer Science and Technology (in Persian), 14, No. 1, 2001, 3-10.

[13]          MA Khatibi, MH Beheshty and J Morshedian, “The Effect of a- Cellulose Fiber on the Properties of Melamine-Formaldehyde Moulding Compounds, Iranian Journal of Polymer Science and Technology (in Persian), 14, No. 1, 2001, 31-38.

[14]          MA Khatibi, MH Beheshty and J Morshedian, “The Effect of Glass-Fiber on the Properties of Melamine-Formaldehyde Moulding Compounds, Iranian Journal of Polymer Science and Technology (in Persian), 14, No.4, 2001, 213-219.

[15]          MH Beheshty, SK Afzali and G Naderi, “The Compounding of Phenolic Nitrile Blends: I- Effect of Phenolic Resin”, Iranian Journal of Polymer Science and Technology (in Persian), 14, No.5, 2002, 309-315.

[16]          MH Beheshty, SK Afzali and G Naderi, “The Compounding of Phenolic Nitrile Blends: II- Effect of Nitrile Elastomer Type”, Iranian Journal of Polymer Science and Technology (in Persian), 14, No.5, 2002, 317-322.

[17]          MH Beheshty, G Naderi, and H Delbari, “Cure Cycle Optimization of a Phenolic – Nitrile foam”, Tahghigh, Vol. 12, No. 43, 2002, 27-33.

[18]          R Mohseni Lavi, M Kokabi and MH Beheshty, “Thermal Degradation Kinetics of Phenolic Resins used in Ablative Heat Shield”, Iranian Journal of Polymer Science and Technology (in Persian), 15, No.4, 2002, 245-250.

[19]          MA Kadghodayan and MH Beheshty, “The Design of Phenolic Resin Sandwich Structures”, International Journal of Engineering (in Persian), No.5, Vol. 13, 2003, 57-67.

[20]          HR Movahhed, A ArefAzar, S Eskandarnejad and MH Beheshty, “Study of the Effect of Core-Twist Hybrid Yarn Glass/PET on Mechanical Properties of Unsaturated Polyester Resin”, Iranian Journal of Polymer Science and Technology (in Persian), 16, No.1, 2003, 31-39.

[21]          M Hayaty and MH Beheshty, “Shrinkage, Cure Characterization and Processing of Unsaturated Polyester Resin Containing PVAc Low–Profile Additive”, Iranian Polymer Journal, 13 (5), 2004, 389-396.

[22]          MH Beheshty and H Delbari, “Cure Optimization of Asbestos Reinforced Phenolic Resins”, Iranian Journal of Polymer Science and Technology (in Persian), 17, No.5, 2004, 307-313.

[23]          MH Beheshty, MA Kadkhodayan and M Vafayan, “The Effect of Co-cure and counter Cure Methods on the Properties of Phenolic Sandwich Structures, Iranian Journal of Polymer Science and Technology (in Persian), 18, No.3, 2005, 151-157.

[24]          MH Beheshty, H Nasiri and M Vafayan, Gel Time and Exotherm Behavior Studies of an Unsaturated Polyester Resin Initiated and Promoted with Dual Systems, Iranian Polymer Journal, 14, (11), 2005, 990-999.

[25]          A Mirzapour, MH Beheshty and M Vafayan, The response of sandwich panels with rigid polyurethane foam cores under flexural loading, Iranian Polymer Journal, 14, (12), 2005, 1082-1088.

[26]          MH Beheshty, M Hayaty and M. Vafayan, Evaluation of low-profile additives in the curing of unsaturated polyester resins at low temperatures, Iranian Polymer Journal, 15, (2), 2006, 143-153.

[27]          AR Bahramian, M Kokabi, MH Navid Famili and MH Beheshty, Ablation and thermal degradation behaviour of a composite based on resole type phenolic resin: Process modeling and experimental, Polymer, 47, (10), 2006, 3661-3673.

[28]          SM Mozaffari, MH Beheshty and M Vafayan, Effect of Molecular Weight of Polyvinyl Acetate on Volume Shrinkage of an Unsaturated Polyester Resin, Iranian Journal of Polymer Science and Technology (in Persian), 19, (3), 2006, 101-109.

[29]            MH Beheshty, M. Vafayan, M. Poorabdollah, Shrinkage Control and Kinetics Behavior of Clay-Unsaturated Polyester Nanocomposites, Iranian Polymer Journal, 15, (10), 2006, 841-849.

[30]            MA Mirzapour, MH Beheshty, M Vafayan, The Study of Compression Strength and Morphology of Rigid Polyurethane Foams, Iranian Journal of Polymer Science and Technology (in Persian), 20, (1), 2007, 59-64.

[31]          M Vafayan, MH Beheshty and H Nasiri, A Kinetic Model for the Low Temperature Curing of an Unsaturated Polyester Resin with single and Dual Initiators, Polymers and Polymer Composites, 15 (3), 2007, 183-190.

[32]           AR Bahramian, M. Kokabi, MH Beheshty, MH Navid Famili, Thermal Degradation Process of Resole Type Phenolic Matrix/Kaolinite Layered Silicate Nanocomposite, Iranian Polymer Journal, 16, (6), 2007, 375-387.

[33]           MH Beheshty and K. Doustkhah, Studying Room Temperature Curing of Phenolic Resin and their Composites, Iranian Journal of Polymer Science and Technology (in Persian), 20, (4), 2007, 331-336.

[34]            AR Bahramian, M. Kokabi, MH Navid Famili, MH Beheshty, High Temperature Ablation of Kaolinite Layered Silicate/Phenolic Resin/Asbestos Cloth Nanocomposites, Journal of Hazardous Materials, 150, 2008, 136–145.

[35]            M Karami Ghahi, MH Beheshty, M Esfandeh, AM Rezadoust, Study of Room Temperature Curing of Phenolic Resin and its Silica Reinforced Composites, Iranian Journal of Polymer Science and Technology (in Persian), 21, (2), 2008, 149-155.

[36]            M Rajabian, G Naderi, MH Beheshty, PG Lafleur, C. Dubois and P.J. Carreau, Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows, Intern. Polymer Processing XXIII (2008), 110-118.

[37]            AR Sabet, MH Beheshty, H Rahimi, High Velocity Impact behavior of GRP panels containing coarse sized sand filler, Polymer Composites, 29, (8), 2008, 932-938.

[38]            AR Sabet, MH Beheshty, H Rahimi, Quasi-Static Perforation Study Using a Sharp-Tip Conical Indenter on GRP Plates Containing Sand Filler, Polymer and Polymer Composites, 17, (1), 2009, 21-30.

[39]            M Rajabian, MH Beheshty, Rheology and Flow Behavior of Suspensions of Nanosized Plate-Like Particles in Polyester Resins at the Startup of Shear Flows; Experimental and Modeling, Polymer Composites, 30, (4), 2009, 399-407.

[40]            MH Beheshty, M Vafayan, M Poorabdollah, Low Profile Unsaturated Polyester Resin–Clay Nanocomposite Properties, Polymer Composites, 30, (5), 2009, 629-638, DOI 10.1002/pc.20597.

[41]            AR Sabet, MH Beheshty, H Rahimi, Experimental study of sharp-tipped projectile perforation of GFRP plates containing sand filler under high velocity impact and quasi-static loadings, Polymer Composites, 30, (11), 2009, 1497-1509, DOI 10.1002/ PC.20720

[42]            M Rajabian, G Naderi, H Piroozfar, MH Beheshty, M Samadfam, An investigation on modeling and measurements of transient elongational rheology of polymer melts by SER testing platform, e-Polymers, 2009, no. 118

[43]            G Naderi, MH Beheshty, and M Baba Mohammadi, Effect of Composition and Type of Phenolic Resin on Mechanical Properties and Morphology of Phenolic Nanocomposites, Iranian Journal of Polymer Science and Technology (in Persian), 22, (6), 2010, 421-428.

[44]              S Nemati, JE Jam, and MH Beheshty, Effect of Rigid Polyurethane Foam Core Density on Flexural and Compressive Properties of Sandwich Panels with Glass/Epoxy Faces, Iranian Journal of Polymer Science and Technology (in Persian), 23, (1), 2010, 3-16.

[45]              O Moini Jazani, A Arefazar, MH Beheshty, Study on the effect of processing conditions on the mechanical properties of PP/PC/SEBS ternary blends using Taguchi experimental analysis, e-Polymers, 2010, no. 117

[46]            N Naderi, MH Beheshty, S Mazinani, Effect of Initiator on Thermal Curing of Unsaturated Polyester Resins, Iranian Journal of Polymer Science and Technology (in Persian), 23, (5), 2010, 415-422.

[47]         M Hayaty, MH Beheshty, M Esfandeh, Cure Kinetics of a Glass/Epoxy Prepreg by Dynamic Differential Scanning Calorimetry (DSC), J. Applied Polymer Science, 120, 2011, 62-69.

[48]            M Hayaty, MH Beheshty, M Esfandeh, A new Approach for Determination of Gel Time of a Glass/Epoxy Prepreg, J. Applied Polymer Science, 120, 2011, 1483-1489.

[49]           AR Sabet, N Faghih, MH Beheshty, Effect of reinforcement type on high velocity impact response of GRP plates using a sharp tip projectile, International Journal of Impact Engineering, 38, 2011, 715-722. DOI 10.1016

[50]           M Hayaty, MH Beheshty, M Esfandeh, Isothermal differential scanning calorimetry study of a glass/epoxy prepreg, Polymers for Advanced Technologies, 22, 2011,1001-1005, DOI: 0.1002/pat.1607

[51]           O Moini Jazani, A Arefazar, SH Jafari, MH Beheshty and A Ghaemi, A study on the effects of SEBS-g-MAH on the phase morphology and mechanical properties of polypropylene/polycarbonate/SEBS ternary polymer blends, J. Applied Polymer Science, 121, 5, 2011, 2680-2687.

[52]             M Poorabdollah, MH Beheshty, M Vafayan, Kinetic Modeling of Nanoclay Reinforced Unsaturated Polyester Resin, Polymer Composites, 32 (8) 2011, 1265-1273. DOI 10.1002/pc.21146.

[53]           E Joadar, MH Beheshty, M Ataei, Nano Clay Effect on Morphology, Mechanical Properties and Water Absorption of Vinyl Ester Based Nanocomposites, Iranian Journal of Polymer Science and Technology (in Persian), 24 (2), 2011, 104-112.

[54]          M Rajaei, MH Beheshty, M Hayaty, Preparation and processing characterization of glass/phenolic prepregs, Polymers and Polymer Composites, 19, 9, 2011, 717-724.

[55]          N Abuali Galledari, MH Beheshty, M Barmar, Effect of NBR on Epoxy/Glass Prepregs Properties, J. Applied Polymer Science, 123, 3, 2012, 1597-1603.

[56]           L Zare, MH Beheshty and M Vafayan, The evaluation of low profile additives on the shrinkage control of unsaturated polyester resin cured at room temperature, Polymers and Polymer Composites, 20 (3), 2012, 289-298.

[57]           M Poorabdollah, MH Beheshty, M Vafayan, A study on the kinetic behaviour and thermo-mechanical properties of nanoclay reinforced unsaturated polyester resin prepared under high shear conditions, e-Polymers 2012, 12, no. 042, 1-19.

[58]           M Karimzadeh, AR Sabet, MH Beheshty, Effect of nanoclay particles on mold-filling performance in composites made via resin infusion process, Polymer Composites, 33 (5), 2012, 745-752.

[59]           M Rajabian, H Piroozfar, MH Beheshty, Preparation and properties of polyester nanocomposites: Effects of mixing, Polymer Composites, 33, 2012, 1777–1784.

[60]           M Rajabian, G Naderi, M Samadfam, MH Beheshty, Shearing and mixing effects on synthesis and properties of organoclay/polyester nanocomposites, Rheologica Acta, 51, 2012, 1007–1019.

[61]           A Heidari, MH Beheshty and H Rahimi, Functionalization of multi-walled carbon nanotubes via direct friedel-crafts acylation in an optimized PPA/P2O5 medium, Fullerenes, Nanotubes and Carbon Nanostructures, 21 (6), 2013, 516-524.

[62]           M Vafayan, MH Beheshty, MHR Ghoreishy, H Abedini, Advanced integral isoconversional analysis for evaluating and predicting the kinetic parameters of the curing reaction of epoxy prepreg, Thermochimica Acta, 557, 2013, 37-43.

[63]           AM Rezadoust, M Esfandeh, MH Beheshty, Rheological behaviour of styrene-free unsaturated polyester-clay nanocomposites, Polymers and Polymer Composites, 21 (2), 2013, 101-110.

[64]           R Akbari, MH Beheshty and M Shervin, Toughening of dicyandiamide-cured DGEBA-based epoxy resins by using CTBN liquid rubber, Iranian Polymer Journal, 22 (5), 2013, 313-324.

[65]           AM Rezadoust, M Esfandeh, MH Beheshty, G Heinrich, Effect of the nanoclay types on the rheological response of unsaturated polyester-clay nanocomposites, Polymer Engineering and Science, 53, 2013, 809-817.

[66]           M Poorabdollah, MH Beheshty, Effect of resin composition on curing kinetic of nanoclay-reinforced unsaturated polyester resins, Iranian Polymer Journal, 22 (6), 2013, 385-398.

[67]           M Hayaty, H Honarkar, MH Beheshty, Cure behavior of dicyandiamide/epoxy resin system with different accelerators, Iranian Polymer Journal, 22 (8), 2013, 591-598.

[68]           F Halimi, M Golzar, P Asadi, MH Beheshty, Core Modifications of Sandwich Panels Fabricated by VARTM, Journal of Composite Materials, 47 (15), 2013, 1853-1863.

[69]           M Vafayan, H Abedini, MH Beheshty, MHR Ghoreishy, Effect of cure kinetic simulation model on optimized thermal cure cycle for thin-sectioned composite parts", Polymer Composites, 34 (7), 2013,  1172-1179.

[70]           N Mahnam, MH Beheshty, M Barmar and M Shervin, Modification of Dicyandiamide-cured epoxy resin with different molecular weights of polyethylene glycole and its effect on epoxy/glass prepreg characteristics, High Performance Polymers, 25 (6), 2013, 705-713.

[71]           M Poorabdollah, MH Beheshty, M Ataei, M Vafayan, Cure kinetic study of organoclays-unsaturated polyester resin nanocomposites by using advanced isoconversional approach, Polymer Composites, 34 (11), 2013, 1824-1831.

[72]           M Vafayan, MH Beheshty, MHR Ghoreishy, H Abedini, The prediction capability of the kinetic models extracted from isothermal data in non-isothermal conditions for an epoxy prepreg, Journal of Composite Materials, 48 (9), 2014, 1039-1048.

[73]           M Poorabdollah, MH Beheshty and M Atai, Cooperative rearrangement region in nanoclay-reinforced unsaturated polyester resin, Polymer Engineering and Science, 54 (12), 2014, 2859-2865.

[74]           N Naderi, S Mazinani, MH Beheshty and MM Rajab, Cure kinetics of hot-cured unsaturated polyester (UP) /nanoclay nanocomposite including dual-initiators, Plastics, Rubber and Composites, 44 (1), 2015, 19-25.

[75]           H Rahimi, MH Beheshty, A Sabet, High velocity impact of GRP laminates with sharp nose projectile experimental results versus some models predictions, Mechanics of Advanced Materials and Structures, 22 (7), 2015, 521-529.

[76]           H Jamshidi, R Akbari, MH Beheshty, Toughening of dicyandiamide-cured DGEBA-based epoxy resins using flexible diamine, Iranian Polymer Journal, 24 (5), 2015, 399-410.

[77]          M Vafayan, H Abedini, MH Beheshty, MHR Ghoreishy, Development of an optimized thermal cure cycle for a complex shape composite part using a coupled finite element/genetic algorithm technique, Iranian Polymer Journal, 24 (6), 2015, 459-469.

[78]          MA Fathizadeh, MH Beheshty, A Comparative study on the Thermal Resistance, Flammability and Mechanical Properties of Unsaturated Polyester and Epoxy Resins, Iranian Journal of Polymer Science and Technology (in Persian), 28 (5), 2016, 409-416.

[79]          SM Mozaffari, MH Beheshty, SM Mirabedini, Microencapsulation of 1-methylimidazole using solid epoxy resin: study on microcapsule residence time and properties of the system, Iranian Polymer Journal, 25(4), 2016, 385-394.

[80]          M Poorabdollah, MH Beheshty, M Atai , Investigating curing kinetics and structural relaxation phenomena of unsaturated polyester resin containing silanized silica, Journal of Composite Materials, 50 (18), 2016, 2459–2467.

[81]          H Nazarpour-Fard, K Rad-Moghadam, F Shirini, MH Beheshty, Novel Improvements in Thermal and Hydrophobic Properties of Chitosan Reinforced by Rice Husk Ash, Polymers from Renewable Resources 7 (4), 2016, 115-133.

[82]          MH Beheshty, MA Fathizadeh, A Comparative study on the Thermal Resistance, Flammability and Mechanical Properties of Unsaturated Polyester and Epoxy Resins, Iranian Journal of Polymer Science and Technology (in Persian) 28 (5), 409-416.

[83]          M Hesabi, A Salimi, MH Beheshty, Effect of tertiary amine accelerators with different substituents on curing kinetics and reactivity of epoxy/dicyandiamide system, Polymer Testing 59, 2017, 344-354.

[84]          SM Mozaffari, MH Beheshty, SM Mirabedini, Effect of processing conditions on the Microencapsulation of 1-methylimidazole Curing Agent Using Solid Epoxy Resins, Iranian Polymer Journal, 26, 2017, 629-637.

[85]          H Nazarpour-Fard, K Rad-Moghadam, F Shirini, MH Beheshty, GH Asghari,Reinforcement of epoxy resin/carbon fiber composites by carboxylated carbon nanotubes: a dynamic mechanical Study, Polimery, 63 (4), 2018, 253-263.

[86]          H Jamshidi, MH Beheshty, and R Akbari, Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties, In Persian, Journal of Science and Technology of Composites, 5 (1), 2018, 25-32.

 

[87]          M Khalina, MH Beheshty, A Salimi, Preparation and Characterization of DGEBA/EPN Epoxy Blends with Improved Fracture Toughness, Chinese Journal of Polymer Science, 36 (5), 2018, 632–640.

[88]           SM Mozaffari and MH Beheshty, Thermally-Latent Curing Agents for Epoxy Resins: A Review, Iranian J. Polymer Science and Technology (Persian), 31 (5), 2018, 409-426.

[89]          M Hesabi, A Salimi, MH Beheshty, Development of amine-based latent accelerator for one-pot epoxy system with low curing temperature and high shelf life, European Polymer Journal, 112, 2019, 736–748.

[90]          M Niazi, MH Beheshty, A new latent accelerator and study of its eect on physical, mechanical and shelf-life of carbon fiber epoxy prepreg, Iranian Polymer Journal, 28, 2019, 337-346. DOI 10.1007/s13726-019-00704-8

[91]          M Khalina, MH Beheshty, A Salimi, The effect of reactive diluent on mechanical properties and microstructure of epoxy resins, Polymer Bulletin, 76 (8), 2019, 3905-3927. DOI 10.1007/s00289-019-2577-6


C. Conference Papers

[1]    Jalali A, Beheshty MH and Mashhadi A A, “Effect of Curing System and Resin Content on Permeability of NBR”, 4th national Conference on Polymer Science and Technology, Tehran, Iran, 1990.

[2]    Beheshty MH and Aref-Azar A, “Mechanical Properties of Randomly Oriented Glass Fibre Reinforced Phenolic Composites”, 1st International Conference on Polymer Science and Technology, Shiraz, Iran, April 1994.

[3]    Hashemi S.A. and Beheshty MH, “Effect of Silane Coupling Agents on Glass-Fiber Reinforced Phenolic Composites”, 1st International Conference on Polymer Science and Technology, Shiraz, Iran, April 1994.[4]    Beheshty MH and Harris B, “Fatigue Behaviour of Carbon-Fibre-Reinforced Plastics After Low-Velocity Impact”, Proceedings of the Forth National and Second International Seminar on Polymer Science and Technology, Tehran, Iran, 3-5 November 1997, 627-632.

[5]    Almond DP, Delpech P, Beheshty MH and Wen P, “Quantitative Determination of Impact Damage and other Defects in Carbon Fibre Composites by Transient Thermography” SPIE Conference, 2-5 December 96, Arizona, USA.

[6]    Beheshty MH and Harris B, “Fatigue Behaviour of Carbon-Fibre-Reinforced Plastics After Low-Velocity Impact”, Proceedings of the Forth National and Second International Seminar on Polymer Science and Technology, Tehran, Iran, 3-5 November 1997, 627-632.
[7]    Beheshty MH and Harris B, “Post-Impact Fatigue Behaviour of CFRP and the Growth of Low-Velocity Impact Damage During Cycling”, Proceedings of the International Conference on Fatigue of Composites, Paris, 3-5 June 1997, 355-362.
[8]    Beheshty MH and Harris B, The Interaction Between Low-Velocity Impact and Fatigue of Carbon- and Glass-Fibre-Reinforced Plastics”, in Science, Technologies and Applications, Proc. Eighth European Conference on Composite Materials, ECCM8, Naples, Italy, Editor I Crivelli-Visconti, (Woodhead, Abington, UK), Vol. 1, 1998, 143-150.

[9]    Harris B, Almond DP, Adam T, Beheshty MH and Lee JA, “Fatigue-life Prediction Methods for Fiber Reinforced Composites in The Undamaged and Damaged Conditions”, 1999, Proceedings of the 7th International Conference, Fatigue ’99, Beijing, China, June 1999, (Higher Education Press, Beijing, China, and EMAS, Cradley Heath, UK), vol. 3, 1719-1724.

[10]    Beheshty MH and Harris B, “Fatigue-life prediction for Fibre-Reinforced Plastics”, The Proceeding of Iranian Seminar on Polymer Science and Technology (Fifth), 12-14 September 2000, Amirkabir University, Tehran, Iran, pp. 231-234.

[11]    Fasihi Dastjerdi A., Beheshty MH and Rahimi H., “A Study of the Effect of Resin Injection Pressure on Mould Filling Time and Entrapment of Air in RTM Process”, The Proceeding of Iranian Seminar on Polymer Science and Technology (Fifth), 12-14 September 2000, Amirkabir University, Tehran, Iran, pp. 203-206.

[12]    Fasihi Dastjerdi A and Beheshty MH, Optimum Conditions for the Manufacture of Hollow Tubes by RTM Process”, The Proceeding of first Congress of Aerospace Organization, 2000, Vol. 8, Materials and Manufacturing (1), 130-141.

[13]    Beheshty MH, “Effect of Low-Velocity Impact on Fiber Reinforced Plastics”, The Proceeding of first Conference of Aerospace Organization, 2000, Vol. 8, Materials and Manufacturing (1), 142-152.

[14]     Mohseni Lavi R. and Beheshty MH, “The Application of Phenolic-Basalt Composites in Aerospace industry”, The Proceeding of first Conference of Aerospace Organization, 2000, Vol. 9, Materials and Manufacturing (2), 35-44.

[15]     Beheshty MH, Detection of Low-Velocity Impact Damage by Transient Thermography”, The Proceedings of first International and 3rd National Conference of the Iranian Aerospace Society, AERO 2000, Sharif University of Technology, Tehran, Vol. 3, Dec., 30, 2000, Jan, 1, 20001, 1019-1026.

[16]     Beheshty MH, Afzali SK and Naderi G., “Effect of Phenolic Resin on the Properties of Nitril Elastomers”, The Proceedings of Fourth National Conference of Rubber, 20-21 Feb., 2001, 131-137.

[17]     Mohseni Lavi R., Kokabi M. and Beheshty MH, Kinetic Analysis of Thermal Degradation of Phenolic-Basalt Composites”, The Proceeding of sixth national Conference of Chemical Engineering, 2-4 May 2001, Isfehan University, Vol. 5, 97-104.

[18]     Beheshty MH, Naderi G. and Afzali SK, Effect of Phenolic Resin on the Thermal Behaviour of Nitril Elastomer, The proceedings of PPS-2001, October 22-24, 2001, Antalya, Turkey, P. 335.

[19]     Beheshty MH, Afzali SK and Naderi G., “Effect of Aditives Resin on the Properties of Nitril Elastomers”, The Proceedings of Fifth National Conference of Rubber, 20-21 Feb., 2002, 136-143.

[20]     Nasiri H, Beheshty MH, and Alavi SMB, The Effect of Initiator on Cure Behaviour of Unsaturated Polyester Resin, The Proceeding of seventh national Conference of Chemical Engineering, 28-31 October 2002, Tehran University, Vol. 6, 67-72.

[21]     Khatibi M, Beheshty MH, “The Comparison of Mechanical properties of Melamine-formaldehyde Molding Compounds Reinforced with α-Cellulos and Glass Fiber, Proceeding of the 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003), 12-15 May 2003, Iran Polymer and Petrochemical Institute, Tehran, Iran, p197.

[22]     Nasiri H, Beheshty MH and Alavi SMB, “Curing of Unsaturated Polyester Resin by Using Mixed Catalysts”, Proceeding of the 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003), 12-15 May 2003, Iran Polymer and Petrochemical Institute, Tehran, Iran, p203.

[23]     Hayaty M and Beheshty MH, “Effect of PVAc Low-Profile Additive on Shrinkage and Processing of Unsaturated Polyester Resin”, Proceeding of the 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003), 12-15 May 2003, Iran Polymer and Petrochemical Institute, Tehran, Iran, p221.

[24]     Beheshty MH and Delbari H., “Cure Cycle Optimization of a Asbestos – Phenolic Composites, The Proceeding of second Conference of Aerospace Organization, 5-7 January 2004, Vol. 13, Materials and Manufacturing (1), 2640-2648.

[25]     Bahramian AR and Beheshty MH, “Simulation of Thermal Degradation of Ablative Insulators”, The Proceeding of second Conference of Aerospace Organization, 2004, Vol. 5, pp 916-926.

[26]     Mirzapour MA and Beheshty MH, Optimization of Processing Conditions of Sandwich Structures, The Proceeding of 9th Iranian Chemical Engineering Congress, 23-25 November 2004, Elm Va Sanat University, Part 10, 4515-4524.

[27]     Mirzapour MA Beheshty MH and Vafayan M, The study of Processing Conditions on Mechanical Properties of Polyurethane Foam Core Sandwich Structures, The Proceeding of 5th Students Chemical Engineering Conference, 9-11 March 2005, Amirkabir University, Tehran, 149.

[28]     A.R. Bahramian, M. Kokabi, MH Beheshty and MH Navid Famili, Comparison of thermal degradation of a phenolic matrix composite in air and inert gas, Proceeding of International Seminar on Polymer Science and Technology (ISPST 2005), September 27-29, 2005, Tehran, Iran, p72.

[29]     MH Beheshty, H. Nasiri and M. Vafayan, Curing Behavior Studies and Resin-Transfer Molding of a Fiber-Reinforced Unsaturated Polyester Resin Cured with Mixed Initiators and Promoters, Proceeding of International Seminar on Polymer Science and Technology (ISPST 2005), September 27-29, 2005, Tehran, Iran, p 82.

[30]     A.R. Bahramian, M. Kokabi, MH Navid Famili and MH Beheshty, Ablating Behaviour of a Thermoset Matrix Composite; Theoretical Modelling and Experimental Testing, Proceeding of International Seminar on Polymer Science and Technology (ISPST 2005), September 27-29, 2005, Tehran, Iran, p 93.

[31]     A.R. Bahramian, M. Kokabi, MH Navid Famili and MH Beheshty, Phase changes of composite based on thermoset polymer under high temperature, Proceeding of International Seminar on Polymer Science and Technology (ISPST 2005), September 27-29, 2005, Tehran, Iran, p 204.

[32]     MH Beheshty, M. Hayaty and M. Vafayan, Thermoplastic Low-Profile Additives and their Performance in the Low-Temperature Curing of Unsaturated Polyester Resins, Proceeding of International Seminar on Polymer Science and Technology (ISPST 2005), September 27-29, 2005, Tehran, Iran, p 216.

[33]     H.R. Movahed, A. Arefazar, S. Eskandarnejad and MH Beheshty, The Effect of Core-Twist Hybrid yarn GL/PET on Mechanical Properties of Unsaturated Polyester Resin(Part 1), Proceeding of International Seminar on Polymer Science and Technology (ISPST 2005), September 27-29, 2005, Tehran, Iran, p 219.

[34]      A.R. Bahramiana, M. Kokabia, M. H. Navid Familia and MH Beheshty, Thermal conduction mechanism of the high performance layered silicate resole type phenolic resin nanocomposite, The 11th Iranian Chemical Engineering Congress, November 28-30, 2006, Tarbiat Modarres University, Tehran, Iran.

[35]      A.R. Bahramiana, M. Kokabia, M. H. Navid Familia and MH Beheshty, Inverse  Solution Analysis of Ablative Nanocomposite Heat Shield, 1st Aerospace Structures & Separation Systems Symposium – 20 Dec 2006, Aerospace Industrial Organization, Tehran, Iran.

[36]      MH Beheshty, M. Vafayan, M. Poorabdollah, Preparation and Properties of Low Profiled Unsaturated Polyester Resin – Clay Nanocomposites, Proceeding of 8th International Seminar on Polymer Science and Technology, (ISPST 2007), October 23-25, 2007, Sharif University of Technology, Tehran, Iran, p 195.

[37]      A.R. Sabet, MH Beheshty, H. Rahimi, Experimental Investigation of GRP panels Containing Coarse Sized Sand Filler Under High Velocity Impact, Proceeding of 8th International Seminar on Polymer Science and Technology, (ISPST 2007), October 23-25, 2007, Sharif University of Technology, Tehran, Iran, p 202.

[38]      M. Rajabian, MH Beheshty, M. Vafayan, M. Poorabdollah, Suspension of Nano-sized plat- like Particles in Polyester Resins; Rheology and Flow Behaviour, Proceeding of 8th International Seminar on Polymer Science and Technology, (ISPST 2007), October 23-25, 2007, Sharif University of Technology, Tehran, Iran, p 311.

[39]      M. Rajabian, G. Naderi, MH Beheshty, C. Dubois and P.G. Lafleur, Experimental Observations and Quantitative Predictions of Rheological Properties of Organoclay-PPNanocomposites in Shear and Elongational Flows, Proceeding of 8th International Seminar on Polymer Science and Technology, (ISPST 2007), October 23-25, 2007, Sharif University of Technology, Tehran, Iran, p 236.

[40]      A.R. Bahramian, M. Kokabi, MH Navid Famili, MH Beheshty, Resole/Kaolinite Nanocomposites as an Ablative Heat Shield, Proceeding of 8th International Seminar on Polymer Science and Technology, (ISPST 2007), October 23-25, 2007, Sharif University of Technology, Tehran, Iran, p 245.

[41]      A.R. Bahramian, M. Kokabi, MH Navid Famili, MH Beheshty, Synthesis and Characterization of  Kaolinite Layered Silicate Nanocomposite, Proceeding of 8th International Seminar on Polymer Science and Technology, (ISPST 2007), October 23-25, 2007, Sharif University of Technology, Tehran, Iran, p 246.

[42]      A.R. Bahramian, M. Kokabi, MH Navid Famili, MH Beheshty, Thermal Stability of  Phenolic Resin MomntmorilloniteNanocomposite, Proceeding of 8th International Seminar on Polymer Science and Technology, (ISPST 2007), October 23-25, 2007, Sharif University of Technology, Tehran, Iran, p 246.

[43]      A. R Sabet, M H Beheshty, H Rahimi, Experimental investigation of GRP panels containing coarse size sand filler under high velocity impact, The 1st International Conference on Composites: Characterization, Fabrication and Application (CCFA-1), 15-18 December 2008, Kish Island, Iran, p 22.

[44]      MH Beheshty and M Vafayan, Kinetic and Thermo- Mechanical Studies on the Unsaturated Polyester (UP) Resin/Clay Nanocomposites Prepared by High Shear- Long Time Procedure, The 1st International Conference on Composites: Characterization, Fabrication and Application (CCFA-1), 15-18 December 2008, Kish Island, Iran, p 91.

[45]      M H Beheshty and Mehdi Vafayan, Kinetic and Thermo- Mechanical Studies on the Unsaturated Polyester (UP) Resin/Clay Nanocomposites Prepared by High Shear- Long Time Procedure, The 1st International Conference on Composites: Characterization, Fabrication and Application (CCFA-1), 15-18 December 2008, Kish Island, Iran, p 91.

[46]      MH Beheshty, Prepregs; from Science to Technology, Keynote lecture, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[47]      N Abuali Galledari, M H Beheshty, M Hayaty, Experimental Analysis of Glass/Epoxy Prepreg Tack, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[48]      A H B Arya, M H Beheshty,  Preparation of a Glass/Epoxy prepreg and the Analysis of Processing Condition, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[49]      M Hayaty, M H Beheshty, M Esfandeh, From a Commercial Glass-Epoxy Prepreg to a Customer Driven Prepreg System, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[50]      M Hayaty, M H Beheshty, M Esfandeh, Effect of Some Accelerators on Curing of Dicyandiamide / Epoxy Resin system, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[51]      M Rajaei, M H Beheshty, Preparation of a Glass/Phenolic prepreg and Investigation of Processing Condition, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[52]      A.R. Sabet, H. Rahimi, MH Beheshty, High velocity impact on composite materials; some model assessments, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[53]      S Shaghaghi, M H Beheshty, Effect of Nano-Clay on Mechanical Properties of Unsaturated Polyester Resin, 9th International Seminar on Polymer Science and Technology, (ISPST 2009), 17-21 October, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[54]      M Karimzadeh, MH Beheshty, A.R. Sabet, Effect of nanoclay particles in composites made via resin infusion process, International Congress on Nanoscience & Nanotechnology, 2010, Shiraz, Iran

[55]      S. Shaghaghi, MH Beheshty and H. Rahimi, Preparation and Tack Characterization of Glass/Phenolic Prepregs, The second International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec. 27-30, 2010, Kish Island, Iran, Book of abstract, 1.

[56]      N. Naderi, MH Beheshty, S. Mazinani, Curing Behavior, Kinetics and Morphology of Hot Cured Unsaturated Polyester/Nano-Clay Nanocomposite Resin with Dual Initiators, The second International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec. 27-30, 2010, Kish Island, Iran, Book of abstract, 36.

[57]      A. Heidari, MH Beheshty and H Rahimi, Thermal Conductivity of Functionalized Multi-Walled Carbon Nanotube/Epoxy Composites, The second International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec. 27-30, 2010, Kish Island, Iran, Book of abstract, 117.

[58]      M. Karimzadeh, MH Beheshty, A.R. Sabet, E. Joadar, Effect of Nanoclay Particles in Composites Made via Resin Infusion Process, The second International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec. 27-30, 2010, Kish Island, Iran, Book of abstract, 122.

[59]      L. Zare, MH Beheshty, M. Vafayan, Cure Kinetics of Low Profiled Unsaturated Polyester Resins, The second International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec. 27-30, 2010, Kish Island, Iran, Book of abstract, 140.

[60]      MH Beheshty, Science and Technology of Thermoset Prepregs, The second International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec. 27-30, 2010, Kish Island, Iran, Book of abstract, 214.

[61]      F Rahmani, MH Beheshty and S Javadi, The effect of clay content on bonding properties of novolak adhesives, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P29.

[62]      MH Beheshty, Thermoset prepregs from science to technology, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P101.

[63]      M Shervin, MH Beheshty, Structure-property relationships in dicyandiamide-cured epoxy resins, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P108.

[64]      M Siry, MH Beheshty and M Shervin, Structure-property relationships in anhydride-cured epoxy resins, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P36.

[65]      F Halimi, M Golzar, MH Beheshty, H Halimi, Bending failure behavior of sandwich beams manufactured by vacuum infusion process, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P48.

[66]      F Halimi, M Golzar, MH Beheshty, H Halimi, Flexural properties of sandwich panels with perforated core - hole number and pattern investigation, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P104.

[67]      NA Galledari, MH Beheshty and M Barmar AA Khoram, Investigation of Lap Shear Strength of Epoxy/Glass Prepregs, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P35.

[68]      NA Galledari, MH Beheshty and M Barmar, and AA Khoram, Investigation of Solvent System for Making Epoxy Prepregs by Solution Impregnation, Proceedings of the Polymer Processing Society, Asia/Australia regional meeting, PPS 2011, November 15-17, 2011, Kish island, Iran, P35.

[69]      MH Beheshty, Modification of Epoxy Resins for Making Structural Composite Parts- A Review, Keynote lecture, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.

[70]      R Akbari, M H Beheshty, M Shervin, Effect of CTBN Liquid Rubber concentration on mechanical properties of Dicy-Cured DGEBA based Epoxy Resins, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.

[71]      R Akbari, MH Beheshty, M Shervin, N Mahnam, Effect of Aliphatic Amine/Dicy ratios on mechanical properties of DGEBA based Epoxy Resins, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.

[72]      M Shervin, MH Beheshty, M Seiry, Influence of Curing Agents on Curing of Anhydride-Epoxy Resin System, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.

[73]      N Mahnam, MH Beheshty, M Shervin, R Akbari, Toughening of Dicy-Cured DGEBA based Epoxy Resins by using PEG, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.

[74]      A Sabouki, MH Beheshty, L Moghaddasi, MR Vaseghi Jahromi, Lap Shear and Peel strength of Resole Phenolic resins Toughened by PVB and Nitrile rubber, Proceedings of the 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3) December 18-19, 2012, Iran University of Science and Technology, Tehran, Iran pp 199-200.

[75]      L Moghaddasi, MH Beheshty, A Sabouki, MR Vaseghi Jahromi, Lap Shear and Peel strength of Novolac Phenolic resins Toughened by PVB and Nitrile rubber, Proceedings of the 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3) December 18-19, 2012, Iran University of Science and Technology, Tehran, Iran, pp 201-202.

[76]      MH Beheshty, N Jalal, and Z Asgarzadeh, Reactive Diluents Modification of Epoxy Resins for Making Advanced Composite Materials, Proceedings of the 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3) December 18-19, 2012, Iran University of Science and Technology, Tehran, Iran, pp 203-204.

[77]      H Enshaei, MH Beheshty, M Ehsani, Investigation the Effect of Aromatic Amine on Curing and Thermal Behavior of Epoxy Resin, 11th International Seminar on Polymer Science and Technology, (ISPST 2014), 6-9 October, 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[78]      M Saadat, MH Beheshty, Microencapsulation of 2-methylimidazole Epoxy Curing Agent by Solvent Evaporation Method, 11th International Seminar on Polymer Science and Technology, (ISPST 2014), 6-9 October, 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[79]      MA Fathizade, MH Beheshty, Evolution of heat resistance and flammability of unsaturated polyesters and epoxy resins,11th International Seminar on Polymer Science and Technology, (ISPST 2014), 6-9 October, 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran.

[80]      E Joadar, MH Beheshty, Study of Moisture Diffusion and Cure behavior of Vinyl Ester Resin / Organoclay Nanocomposites, Proceedings of the 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4) December 16-17, 2014, Iran University of Science and Technology, Tehran, Iran

[81]      SM Mozaffari, MH Beheshty, SM Mirabedini, Microencapsulation of 1-MI by shell which can participate in the curing reaction, 12th International Seminar on Polymer Science and Technology, (ISPST 2016), 2-5 November, 2016, Islamic Azad University, Tehran, Iran.

[82]      SM Mozaffari, MH Beheshty, SM Mirabedini , Effect of solvent type on microencapsulation of 1-methylimidazole curing agent by solid epoxy shell, 12th International Seminar on Polymer Science and Technology, (ISPST 2016), 2-5 November, 2016, Islamic Azad University, Tehran, Iran.  

[83]      Z Hejrati, MH Beheshty, R Sahraeian, The effect of alumina nanoparticles addition on the mechanical properties of glass fiber reinforced epoxy composites, 12th International Seminar on Polymer Science and Technology, (ISPST 2016), 2-5 November, 2016, Islamic Azad University, Tehran, Iran.

[84]       Z Hejrati, MH Beheshty, R Sahraeian, The effect of alumina nanoparticles addition on the Shear and Thermal properties of glass fiber reinforced epoxy composites, 12th International Seminar on Polymer Science and Technology, (ISPST 2016), 2-5 November, 2016, Islamic Azad University, Tehran, Iran.

[85]       S Saadatyar, MH Beheshty, R Sahraeian, The shear properties of carbon fiber reinforced epoxy composites containing carboxyl-functionalized multi-walled carbon nanotube, 12th International Seminar on Polymer Science and Technology, (ISPST 2016), 2-5 November, 2016, Islamic Azad University, Tehran, Iran.     

[86]       S Saadatyar, MH Beheshty, R Sahraeian, The effect of multiwall carbon nanotube on carbon fiber-reinforced epoxy properties, 12th International Seminar on Polymer Science and Technology, (ISPST 2016), 2-5 November, 2016, Islamic Azad University, Tehran, Iran.

[87]      MH Beheshty, Advanced Epoxy Resins, Proceedings of the 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5) December 20-21, 2016, Iran University of Science and Technology, Tehran, Iran

[88] MH Beheshty, Advanced Epoxy Resins for making Structural Composites, 6-7 September, 2018, Dubay.

[89] M Dareh, MH Beheshty, S Bazgir, Effect of Accelerators on Curing Behavior of Dicyandiamide-Cured Epoxy Resin, 6th International Conference on Composites: Characterization, Fabrication and Application (CCFA-6), December 11-12, 2018, Iran University of Science and Technology, Tehran, Iran

[90] SM Mozaffari, MH Beheshty, SM Mirabedini, TGA/DSC investigations of encapsulated 1-methylimidazole Latent Curing Agent by Using Solid Epoxy Resin, 13th International Seminar on Polymer Science and Technology, (ISPST 2018), 2-5 November, 2018, Amirkabir University of Technology, Tehran, Iran.

Acting as a referee for Journals:

1-      Iranian Polymer Journal

2-      Polymer Engineering & Science

3-      Journal of Applied Polymer Science

4-      European Polymer Journal

5-      Polymer International

6-      Polymers and Polymer Composites

7-      eXPRESS Polymer Letter

8-      Journal of Reinforced Plastics and Composites

9-     Journal of Composite Materials

10- Advances in Polymer Technology

 

Supervising M.Sc. & Ph.D. Research Projects

  PhD students

1.    SAR Sabet, High Velocity Impact Response of Composite Materials, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2008.

2.    M Hayaty, Thermal-Rheological Analysis of a Glass/Epoxy Prepreg and Increasing Room Temperature Shelf Life, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2010.

3.    M Rezadoust, Investigation the Effect of Nanoclay on Processing and bonding performance of FRP rebars prepared by Pultrusion Process, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2012.

4.    M Vafayan, Simulation and Optimization of Thermal Cure Cycle of Thermoset Prepreg Composite Part  with Variable Thickness, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2013.

5.    M Pourabdollah, Structure-Property Relationship in Nanoclay -Reinforced Unsaturated Polyester Resin, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2014.

6.    S Morteza Mozaffari, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2017.

7.    MN Hesabi, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2018.

8.    M Khalina, Ph.D. Dissertation, Iran Polymer and Petrochemical Institute, 2019.

 

MSc studens

1.    A Fasihi Dastjerdi, “A Study on Experimental and Theoretical of the RTM Process Variables”, Iran Polymer and Petrochemical Institute, 2000.

2.    A Vahidi, “An Investigation into Surface Coating Systems for Composites Produced by RTM-Process”, Iran Polymer and Petrochemical Institute/Islamic Azad University, 2000.

3.    MA Khatibi, “The Compounding of Melamine-Formaldehyde Molding Powders”, Iran Polymer and Petrochemical Institute, 2000.

4.    MA Kadkhodayan, “Design of Phenolic Sandwich Structures”, Iran Polymer Institute/ Oloom and Fonoon Mazandaran University, 2000.

5.    H Delbari, “Cure Cycle Optimization”’ Iran Polymer and Petrochemical Institute/ Oloom and Fonoon Mazandaran University, 2000.

6.    M Sabet, “Cure Kinetic Studies of Phenolic Thermoset Resin”, Oloom and Fonoon Mazandaran University, 2000.

7.    SK Afzali, “Design of Phenolic- Nitrile Compounds as a Heat Insulator”, Iran Polymer and Petrochemical Institute, 2001.

8.    H Nasiri, “Cycle Time Reduction in RTM by Resin Compounding”, Iran Polymer and Petrochemical Institute, 2003.

9.    M Hayati, “The Compounding of Low Profile Unsaturated Polyester Resin”, Iran Polymer and Petrochemical Institute, 2003.

10.              MA Mirzapour, “The Effect of Interface on the Mechanical Properties of Sandwich Structures”, Iran Polymer and Petrochemical Institute, 2005

11.              K Doustkhah, "Room Temperature Curing of Phenolic Resin", Azad University, 2005.

12.              SM Mozaffari, “Effect of molecular weight of low-profile additive on volume shrinkage of an unsaturated polyester resin”, Iran Polymer and Petrochemical Institute, 2006.

13.              M Karami Ghahi, "Room Temperature Curing of Phenolic Resin and its Composites", Iran Polymer and Petrochemical Institute, 2008.

14.              M Fotohi, Phenolic Resin Nanocomposites; Thermal Properties, Islamic Azad University, South Tehran Branch, 2008.

15.              B Jamshidi, Phenolic Resin Nanocomposites; Processing Conditions, Islamic Azad University, South Tehran Branch, 2008.

16.              M Babamohammadi, Phenolic Resin Nanocomposites; Mechanical Properties, Islamic Azad University, South Tehran Branch, 2008.

17.              S Zamirian, Unsaturated Polyester Resin Nanocomposites, Islamic Azad University, South Tehran Branch, 2008.

18.              L Zare, Low-Profile Unsaturated Polyester Resin Containing High Percentage of Low-Profile Additives, Iran Polymer and Petrochemical Institute/Islamic Azad University, South Tehran Branch, 2008.

19.              N Faghih, Effect of Fabric Type on High Velocity Impact Response of Glass Reinforced Unsaturated Polyester Resin, Iran Polymer and Petrochemical Institute/Islamic Azad University, South Tehran Branch, 2009.

20.              M Rajaei, Effective Parameters in the Preparation of Phenolic/Glass Prepreg, Islamic Azad University, 2009.

21.              AHB Area, Effective Parameters in the Preparation of Epoxy/Glass Prepreg, Islamic Azad University, South Tehran Branch, 2009.

22.              S Sahraeian, Room Temperature Curing of Phenolic Resins, Islamic Azad University, South Tehran Branch, 2009.

23.              SS Setayesh, Study of Phenolic Adhesive Properties and their Optimization, Iran Polymer and Petrochemical Institute/Islamic Azad University, 2010.

24.              M. Karimzadeh, Effect of Nano-Clay in Vacuum Infusion Process, Islamic Azad University, South Tehran Branch, 2010.

25.              N Naderi, Effect of Nano-Clay in Hot Curing of Unsaturated Polyester Resin, Islamic Azad University, South Tehran Branch, 2010.

26.              E Joadar, Effect of Nano-Clay on Mechanical and Water Absorption of Vinyl Ester Resins, Islamic Azad University, South Tehran Branch, 2010.

27.              S Shaghaghi, Preparation of Phenolic-Glass Prepregs and Investigation the Effect of Phenolic Resin Type on Their Properties, Iran Polymer and Petrochemical Institute, 2010.

28.              R HassanKanely, Effect of Clay Treatment Conditions on Unsaturated Polyester Nanocomposite Properties, Iran Polymer and Petrochemical Institute, 2010.

29.              N Abuali-Gallehdari, Preparation of Epoxy/Glass prepreg and study of their rheological behavior and tack properties, Iran Polymer and Petrochemical Institute, 2010.

30.              A Heidari, Carbon Nanotube-Reinforced Epoxy Nanocomposites, Islamic Azad University, South Tehran Branch, 2011.

31.              N Noroozzadeh, Epoxy Nanocomposite Coatings with Modified Corrosion Resistance, Islamic Azad University, South Tehran Branch, 2011.

32.               M Siri, Preparation of Epoxy-Glass Prepregs and Investigation the Effect of Epoxy Resin and Curing Agent Type on Their Properties, Iran Polymer and Petrochemical Institute, 2011.

33.               N Mahnam, Toughening of Epoxy Resin by using HTPB and Polyethylene Glycol and Preparation of Toughened Epoxy-Glass Prepregs, Iran Polymer and Petrochemical Institute, 2012.

34.               R Akbari, Toughening of Epoxy Resin by using CTBN and Flexible Amin Curing Agent and Preparation of Toughened Epoxy-Glass Prepreg, Iran Polymer and Petrochemical Institute, 2012.

35.               A Sabouki, Toughening of Phenolic Resole Resins and Investigation the Effect of Nanoclay on their Properties, Shiraz Islamic Azad University, 2012.

36.               L Moghadasi, Toughening of Phenolic Novolak Resins and Investigation the Effect of Nanoclay on their Properties, Shiraz Islamic Azad University, 2012.

37.               R Taheri, Effect of Reactive Diluents on Physical and Mechanical Properties of Epoxy Resins, Shiraz Islamic Azad University, 2013

38.               HR Enshaei, Effect of Cure System on Epoxy Resin and Epoxy-Fiber Glass Properties, Iran Polymer and Petrochemical Institute, 2014.

39.               MA Fathizadeh, Flame retardancy improvement of unsaturated polyester/epoxy alloy by nanotechnology, Iran Polymer and Petrochemical Institute, 2014.

40.               M Saadat, Preparation of epoxy formulation with long pot-life by encapsulation method for prepreg applications, Iran Polymer and Petrochemical Institute, 2015.

41.               M Sherafat, Thermoplastic Toughening of Epoxy Resin and its Effect on Glass/Epoxy Prepregs Properties, Iran Polymer and Petrochemical Institute, 2015.

42.               A Hajibeig, Development of epoxy phenolic alloys and investigation of their cure behavior, Iran Polymer and Petrochemical Institute, 2016.

43.               SOH Ahangar, Toughening of epoxy phenolic alloys and development of a new matrix, Iran Polymer and Petrochemical Institute, 2016.

44.              S Saadtyar, Graphene-carbonnanotube interactions incarbon fiber epoxy prepregs, Iran Polymer and Petrochemical Institute, 2017.

45.              Z Hejrati, The effect of Alumina and Silica nanoparticles on the properties of   glass fiber- epoxy prepregs, Iran Polymer and Petrochemical Institute, 2017.

 

 

 

 

بخش فارسی

 

خلاصه سوابق علمي، پژوهشي، آموزشي و اجرائي

 

دكتر محمدحسين بهشتي

 

(استاد پژوهشگاه پليمر و پتروشيمي ايران)

 

E-mail: Beheshty@isti.ir  & M.Beheshty@ippi.ac.ir

 

 اطلاعات شخصي

 

  • تاريخ تولد: 1343
  •  متأهل
  •  محل تولد: خراسان، كاشمر

 

تحصيلات

 

  •   كارشناسي: بهمن 1366،  رشته مهندسي صنايع پليمر از دانشگاه صنعتي اميركبير
  •   كارشناسي ارشد:  شهريور 1370،  رشته مهندسي پليمر از دانشگاه صنعتي اميركبير
  •   دكتري: خرداد 1376، رشته مهندسي پليمر- كامپوزيت­هاي پليمري، دانشكده علوم و مهندسي مواد،
    دانشگاه باث Bath))، انگلستان

عنوان رساله: بررسي اثرات متقابل عيوب ناشي از خستگي و ضربه در پلاستيكهاي تقويت‏شده با الياف (كامپوزيتهاي كربن/اپوكسي و شيشه اپوكسي)

 

“Interaction between Impact Damage and Fatigue in Fibre Reinforced Plastics”
Supervisor: Professor Bryan Harris

 

زمينه ­هاي تحقيقاتي مورد علاقه

 

  •   پيش­ آغشته­ هاي اپوکسي شيشه و فنولي شيشه
  •   توسعه چسب­هاي اپوكسي، فنولي و وينيل­استر
  •   نانو كامپوزيت­ها
  •   فراورش، خواص و طراحي كامپوزيت­هاي گرماسخت پليمري (پودري، الياف كوتاه و بلند).
  •   تكنولوژي و فراورش پليمرها
  •   برنامه ریزی و مدیریت پژوهش و فناوری

 

سوابق كاري و سمت­هاي اجرايي

  •   عضو هيات علمي پژوهشگاه پليمر و پتروشيمي ايران، پژوهشكده فرآيند پليمرها، گروه پژوهشی كامپوزيت، از شهريور ماه 1376
  •   مدیر تحصيلات‏ تكميلي پژوهشگاه پليمر و پتروشيمي ايران، از مهرماه 1376 تا آذرماه 1379
  •   مدير برنامه‌ريزي و نظارت پژوهشگاه پليمر و پتروشيمي ايران، از آذرماه 1379  تا آبان 1382
  •   مـعاون پژوهشي، دبير هيات مميزه و عضو كميسيون دائمي پژوهشگاه پليمر و پتروشيمي ايران، از آبان 1382 تا شهريور 1389 (7 سال)
  •   معاون توسعه منابع و مديريت، پژوهشگاه پليمر و پتروشيمي ايران از اسفند 1392 تا دي 1393.
  •   معاون فناوري، پژوهشگاه پليمر و پتروشيمي ايران از دي 1393  تا  دي 1394.
  •   مدير گروه پژوهشی كامپوزيت پژوهشگاه پليمر و پتروشيمي ايران، از آذر 1389 تا دي 1391و از اسفند 1394 تا تیر 1397
  •   رئيس پژوهشكده فرايند پليمرها، پژوهشگاه پليمر و پتروشيمي ايران از دي 1391 تا اسفند 1392
  •   عضو كميته شيمي شوراي عالي برنامه ريزي و گسترش وزارت علوم، تحقيقات و فناوري از سال 1391 و رئیس کمیته از سال 1396 تا اسفند 1397
  •   مشاور علمي شركت تيوا پليمر (توليد كننده قطعات كامپوزيتي خودرو، شناور و ...)، آذرماه 1379تا 1383
  •   مشاور علمي شركت مشهد صدرا (توليد كننده لوله­ و مخازن كامپوزيتي)، ديماه 1381 تا 1389 و شركت مشهد صدرا شرق
  •   عضو هيات تحريريه مجلات: علوم و تكنولوژي پليمر(از سال 1382)، Iranian Polymer Journal (از سال 1382)، علوم و فناوريهاي پدافند نوين (از سال 1388)، بسپارش (از سال 1391) و نشريه علوم و فناوري كامپوزيت (از سال 1392)
  •   مدير مسئول نشريه علمي پژوهشي علوم و تكنولوژي پليمر از سال 1391
  •   عضو هيات موسس 2 انجمن علمي (انجمن علمي كامپوزيت ايران و انجمن علمي مواد پرانرژي)
  •   عضو هيات مديره انجمن پليمر ايران (2 دوره سال­هاي 1380 تا 1386) و انجمن علمي كامپوزيت ايران
    (3 دوره سال­هاي 1389 تا - )
  •   رئیس انجمن علمی کامپوزیت ایران از سال 1395 تا ...
  •   عضو شورای راهبردی ستاد توسعه فناوری مواد و ساخت پیشرفته، معاونت علمی و فناوری ریاست جمهوری از سال 1395 تا 1397
  •   عضو هیات امنای پژوهشگاه پلیمر و پتروشیمی ایران از خرداد ماه سال 1397
  •   رئیس مرکز طرح­های کلان ملی فناوری، معاونت علمی و فناوری ریاست جمهوری، از تیر ماه 1397

 

افتخارات

  • عضو هيات علمي نمونه پژوهشگاه پليمر و پتروشيمي ايران سال 1380.
  • مدير پژوهشي برتر وزارت علوم تحقيقات و فناوري سال 1387.

خلاصه اهم تلاشهاي 21 ساله اخير پژوهشي و آموزشي اينجانب به شرح ذيل است

  •  انجام 21 طرح تحقيقاتي پژوهشي و تدوين 38 گزارش علمي آنها
  •  راهنمايي و هدايت 50 پايان نامه کارشناسي ارشد و 8 رساله دکتري
  •  چاپ 86 مقاله علمي پژوهشي در مجلات معتبر علمي (شامل 59 مقاله ISI) با مشخصات درج شده به نشانی:

https://scholar.google.com/citations?user=BATc3ukAAAAJ&hl=en

  • ارائه بيش از94 مقاله در همايش­هاي علمي ملي و بين­ المللي
  • تاليف 2 کتاب با عناوين "پلاستيك­هاي تقويت شده (كامپوزيت­ها) در سال 1384 (تجديد چاپ 1391) ورزين­هاي فنولي در سال 1386 (تجديد چاپ 1388).
  • تدريس دروس خواص مهندسي پليمرها، كامپوزيت­ها، مكانيك پيشرفته كامپوزيت­ها و رزين­هاي صنعتي در مقاطع كارشناسي ارشد و دكتري
  • تدريس مباحث مختلف كامپوزيت­ها (مواد، فرايندهاي شكل دهي، خواص، آزمونهاي كنترل كيفي،
  • رزين­ها، آزمون­هاي غير مخرب (NDT)، تعمير و نگهداري كامپوزيت­ها، آزمون­هاي كنترل كيفي لوله هاي كامپوزيتي و...) در دوره ها و كارگاه­هاي آموزشي كوتاه مدت

 

تأليفات

 

الف) كتاب

 

  •     محمدحسين بهشتي و امير مسعود رضادوست، "پلاستيك­هاي تقويت شده (كامپوزيت­ها)"، 446  صفحه، از انتشارات پژوهشگاه پليمر و پتروشيمي ايران، زمستان 1384، (چاپ دوم 1391)
  •  محمد حسين بهشتي، "رزين­هاي فنولي"، 90 صفحه، از انتشارات انجمن پليمر ايران، 1386، (چاپ دوم 1388).
  • ويراستار كتاب "الياف كربن و كامپوزيت­هاي آن"، ترجمه دكتر سيدعلي هاشمي، پژوهشگاه پليمر ايران، 1372.

 

ب) ثبت اختراع داخلي

  • سيد عليرضا ثابت، محمدحسين بهشتي و حميد رحيمي، "طراحي و ساخت دستگاه ضربه سرعت بالا با پيش رانه گازي"، به شماره 39962 مورخ 9/2/1386.

  •  محمد حسين بهشتي، مهدي وفائيان و مهدي پورعبدالله، "تهيه نانوکامپوزيت برپايه رزين پلي استر غير اشباع با درصد جمع شدگي پايين به روش بلند مدت" به شماره 44677 مورخ 19/9/1386.
  •  محمد حسين بهشتي، مهدي وفائيان و مهدي پورعبدالله، " تهيه فرمولاسيون رزين پلي استر غيراشباع حاوي عامل کاهنده جمع شدگي جهت کاربري در فرايندهاي دما پايين" به شماره 44678 مورخ 19/9/1386.
  •  محمد حسين بهشتي، ميراسد ميرزاپور، "ساخت سازه­هاي ساندويچي با حداکثر خواص مکانيکي"، به شماره 46529 مورخ 6/12/1386.
  • مهران حياتي، محمدحسين بهشتي و مسعود اسفنده، تهيه آميزه­هایيکجزئی اپوکسی قابلنگه­داری دردمای اتاق، به شماره 70252 مورخ 22/3/1390

 

 

Last updating:December, 2019