CURRICULUM VITAE

 
Mohammad Razavi-Nouri
  (B.Sc., M.Sc., Ph.D.)
   Associate Professor
 

Personal Information
Name: Mohammad
Surname: Razavi-Nouri
Date of Birth: June 6, 1966
Address: Iran Polymer and Petrochemical Institute
P.O.Box 14965-115
Fax: +98 21 44787021-23
Tel: +98 21 48662417
 
Educations
Ph.D. in Polymer Engineering (2002)
Metallurgy and Materials, The School of Engineering, The University of Birmingham, Birmingham, UK
Thesis: The Thermal and Mechanical Properties of Polypropylene, Metallocene Polyethylenes and Their Blends.
 
M.Sc. in Polymer Engineering (1993)
The Faculty of Engineering, The University of Tehran, Tehran, Iran
Thesis: An Investigation on Polymer Fibres Substitution for Asbestos in Cementitious Composites.
 
B.Sc. in Chemical Engineering (1989)
Chemical Engineering Department, AmirKabir University, Tehran, Iran
Thesis: Emulsion Polymerization of Acrylics Resins for Paint industry.
 
Diploma in Mathematics and Physics (1984)
Shahid Beheshti High School, Rasht, Iran.
 
 
Working Experiences
 
Iran Polymer and Petrochemical Institute (IPPI), November 1990-Present
Academic Staff of the Faculty of Processing (Department of Plastics)
 
Head of Central Laboratories Department, Iran Polymer and Petrochemical Institute, Sep. 2012-Present
 
Sazeh Gostar Engineering Co., 1996-1998
Consultant of the Polymer Department
 
Khadamat-e Elmi-Sanati Ostan-e Tehran Co., 1996-1997
Consultant of the Polymer Section
 
 
Publications and Presentations
 
a) Publications in English
 
1. Razavi-Nouri, M., Karami, M. and Naderi, G., "Influence of Organoclay Content on   Rheological Behavior and Morphology of Acrylonitrile-Butadiene
Rubber/Poly(Ethylene-co-Vinyl Acetate) Blends", International Journal of Polymeric Materials, Submitted.
 
2. Razavi-Nouri, M., Sabet, A. and Tayefi, M., "Effect of Dynamic Curing Time on Thermal, Mechanical and Rheological Behavior of Organoclay-Containing       Nanocomposites Based on Ethylene-Octene Copolymer", European Polymer Science, Submitted.
 
3. Momtaz, M.,  Barikani, M. and Razavi-Nouri, M., "Effect of Ionic Group Content on Thermal, Structural and Shape Memory Properties of Polycaprolactone-based
Polyurethane Ionomers", Iranian Polymer Journal, 24, 505-513 (2015).
 
4. Razavi-Nouri, M. and Karami, M. "Effect of Rubber Content on Morphology and Thermal and Rheological Behaviors of Acrylonitrile-Butadiene Rubber/
Poly(Ethylene-co-Vinyl Acetate)/Organoclay Nanocomposites, Polymer, 55, 6940-6947 (2014).
 
5. Momtaz, M., Razavi-Nouri, M. and Barikani, M., "Effect of Block Ratio and Strain Amplitude on Thermal, Structural and Shape Memory Properties of Segmented Polycaprolactone-Based Polyurethanes", Journal of Materials Science, 49, 7575-7584 (2014).
6. Sobhani, H., Anderson, P.D., Meijer H.H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Non-Isothermal Modeling of a Non-Newtonian Fluid Flow in a Twin Screw Extruder Using the Fictitious Domain Method", Macromolecular Theory and Simulations, 22, 462-474 (2013).
 
7. Hajibaba, A.,  Naderi, Gh.  Ghoreishy, M.H.R., Bakhshandeh, Gh. and Razavi-Nouri, M., "Effect of Single-Walled Carbon Nanotubes on Morphology and Mechanical Properties of NBR/PVC blends", Iranian Polymer Journal, 21, 505-511 (2012).
 
8. Razavi-Nouri, M., "Creep and Stress Relaxation Behavior of Polypropylene, Metallocene-Prepared Polyethylene and their Blends", Iranian Journal of Chemical Engineering, 9, 60-69 (2012).
9. Razavi-Nouri, M., "Effect of Carbon Nanotubes Content on Dynamic Mechanical Properties, TGA Analysis and Crystalline Structure of Polypropylene", Journal of Applied Polymer Science, 124, 2541-2549 (2012).
 
10. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., Anderson, P.D., Meijer H.H.E. "Modeling of Polymer Fluid Flow and Residence Time Distribution in Twin Screw Extruder Using Fictitious Domain Method", Plastics, Rubber and Composites, 40, 387-396 (2011).
 
11. Razavi-Nouri, M., Naderi, Gh., Parvin, A. and Ghoreishy, M.H.R., "Thermal Properties and Morphology of Isotactic Polypropylene/Acrylonitrile-Butadiene Rubber Blends in the Presence and Absence of a Nanoclay", Journal of Applied Polymer Science, 121, 1365-1371 (2011).
 
12. Taghizadeh, E., Naderi, Gh., Razavi-Nouri, M., "Effects of Organoclay on the Mechanical Properties and Microstructure of PA6/ECO Blend", Polymer Testing, 30, 327-334 (2011).
 
13. Ershad Langroudi, A., Razavi-Nouri, M. and Oromiehie, A.R., "Prediction of Viscoelastic Behavior of Interphase in Polypropylene-Chopped Rice Husk Composites for β-Relaxation Domain", Journal of Applied Polymer Science, 120, 1642-1651 (2011).
 
14. Sobhani, H., Razavi-Nouri, M. and Ghoreishy, M.H.R., "Investigation of Combination of Finite Element Formulation and Element Type on the Accuracy of 3D Modeling of Polymeric Fluid Flow in an Extrusion Die", Journal of Applied Polymer Science, 120, 1607-1615 (2011).
 
15. Naderi, Gh., Razavi-Nouri, M., Taghizadeh, E., Lafleur, P.G., Dubois, C. "Preparation of Thermoplastic Elastomer Nanocomposites Based on Polyamide-6/Polyepichlorohydrin-co-Ethylene Oxide", Polymer Engineering and Science, 51, 278-284 (2011).
 
16. Sobhani, H., Razavi-Nouri, M. and Ghoreishy, M.H.R., "Quasi-steady State Finite Element Modelling of Polymer Melt Flow in an Intermeshing Co-rotating Twin Screw Extruder", Iranian Polymer Journal, 19, 143-154 (2010).
17. Razavi-Nouri, M., "Study of Non-isothermal Crystallization Kinetics of Single-Walled Carbon Nanotubes Filled Polypropylene Using Avrami and Mo Models", Iranian Polymer Journal, 18, 167-176 (2009).
 
18. Razavi-Nouri, M., Ghorbanzadeh-Ahangari, M., Fereidoon, A. and Jahanshahi, M., "Effect of Carbon Nanotubes Content on Crystallization Kinetics and Morphology of Polypropylene", Polymer Testing, 28, 46-52 (2009).
 
19. Faghihi, F., Morshedian, J., Razavi-Nouri, M., and Ehsani, M , "Dynamic Rheological  Behavior of Low Density Polyethylene/Poly(dimethylsiloxane) Immiscible Blends: Interfacial Modification via Reactive Blending", Iranian Polymer Journal, 17, 755-765 (2008).
20. Razavi-Nouri, M., Morshedian, J., Ehsani, M. and Faghihi, F., "Mechanical Properties and Morphology of Low Density Polyethylene/Poly(dimethylsiloxane) Immiscible Blends: Modeling and Influence of Curing Agent"e-Polymers, no.120 (2008). 
 
21. Ershad Langroudi, A., Jafarzadeh-Dogouri, F., Razavi-Nouri, M. and Oromiehie, A.R.,"Mechanical and Thermal Properties of Polypropylene/Recycled Polyethylene Terephthalate/Chopped Rice Husk Composites", Journal of Applied Polymer Science, 110,
1979-1985 (2008).
 
22. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Investigation of Thermal, Mechanical and Electrical Properties of Novel Polyurethanes/High Molecular Weight Polybenzoxazine Blends", Polymers for Advanced Technologies, 19, 1024-1032 (2008).
 
23. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Synthesis and Properties of Polybenzoxazine Modified Polyurethanes as a New Type of Electrical Insulators with Improved Thermal Stability", Polymer Engineering and Science, 48, 1329-1338 (2008).
 
24. Mohammadnia, Z., Zohurriaan-Mehr, M.J., Kabiri, K. and Razavi-Nouri, M., "Tragacanth Gum-Graft-Polyacrylonitrile: Synthesis, Characterization and Hydrolysis", Journal of Polymer Research, 15, 173-180 (2008).
 
25. Razavi-Nouri, M. and Hay, J.N., "Isothermal Crystallization Kinetics and Melting Behavior of Metallocene-Catalyzed Polyethylenes", Iranian Polymer Journal, 16, 105-112 (2007).
 
26. Razavi-Nouri, M. and Hay, J.N., ''Evaluation of the Crystallization Kinetics and Melting of Polypropylene and Metallocene-Prepared Polyethylene Blends'', Journal of Applied Polymer Science, 104, 634-640 (2007).
 
27. Sobhani, H., Razavi-Nouri, M. and Yousefi, A.A., "Effect of Flow History on Poly(vinylidine fluoride) Crystalline Phase Transformation", Journal of Applied Polymer Science, 104, 89-94 (2007).
 
28. Razavi-Nouri, M., "Properties of Polypropylene and Metallocene-Prepared Polyethylene Blends: Crystallization Behavior and Interaction Parameter", Polymer Testing, 26, 108-115 (2007).
 
29. Razavi-Nouri, M., "Studies of Comonomer Distributions and Molecular Segregations in Metallocene-Prepared Polyethylenes by DSC", Polymer Testing, 25, 1052-1058 (2006).
 
30. Razavi-Nouri, M., Jafarzadeh-Dogouri, F.,Oromiehie, A.R. and Ershad Langroudi, A., "Mechanical Properties and Water Absorption Behaviour of Chopped Rice Husk Filled Polypropylene Composites", Iranian Polymer Journal, 15, 757-766 (2006).
 
31. Razavi-Nouri, M. and Hay, J.N., "Phase Separation in Polypropylene and Metallocene Polyethylene Blends", Polymer Engineering and Science, 46, 889-895 (2006).
32. Razavi-Nouri, M., "Effect of Annealing and Pressure on Structure and Melting of a Polypropylene Random Copolymer", Iranian Polymer Journal, 15, 121-126 (2006).
 
33. Razavi-Nouri, M. and Hay, J.N., "Isothermal Crystallization and Spherulite Nucleation in Blends of Polypropylene with Metallocene-Prepared Polyethylene", Polymer International, 55, 6-11 (2006).
 
34. Ghoreishy, M.H.R., Razavi-Nouri, M. and Naderi, G., "Finite Element  Analysis of a Thermoplastic Elastomer Melt Flow in the Metering Region of a Single Screw Extruder", Computational Materials Science, 34, 389-396 (2005).
 
35. Razavi-Nouri, M., "Thermal and Dynamic Mechanical Properties of a Polypropylene Random Copolymer", Iranian Polymer Journal, 14, 485-493 (2005).     
 
36. Razavi-Nouri, M. and Hay, J.N., "Effect of Orientation on Mechanical Properties of Metallocene Polyethylenes", Iranian Polymer Journal, 13, 521-530 (2004).
 
37. Razavi-Nouri, M. and Hay, J.N., "Time-Temperature Superposition and Dynamic Mechanical Properties of Metallocene Polyethylenes", Iranian Polymer Journal, 13, 363-370 (2004).
 
38. Ghoreishy, M.H.R. and Razavi-Nouri, M., "Modeling the Flow in the Metering Zone of Single Screw Extruders Using a Helical Geometry Model", International Polymer Processing, XIX, 95-100 (2004).
 
39. Razavi-Nouri, M. and Hay, J.N., "Thermal and Dynamic Mechanical Properties of Metallocene Polyethylene", Polymer, 42, 8621-8627 (2001).
 
40. Ghoreishy, M.H.R., Karrabi, M. and Razavi-Nouri, M., "Development of Optimized Rubber Compounds for the Components of the Bead Section of a Low Aspect Ratio Steel-belted Radial Tire", Iranian Polymer Journal, 10, 115-123 (2001).
 
41. Ghoreishy, M.H.R., Razavi-Nouri, M. and Naderi, G., "Finite Element Analysis of Flow of Thermoplastic Elastomer Melt through Axisymmetric Die with Slip Boundary Condition", Plastics, Rubber and Composites, 29, 224-228 (2000).
 
42. Ghoreishy, M.H.R. and Razavi-Nouri, M., "Finite Element Analysis of Thermoplastic Melts Flow through the Metering and Die regions of Single Screw Extruders", Journal of Applied Polymer Science, 74, 676-689 (1999).
 
43. Naderi G., Razavi-Nouri, M., Mehrabzadeh, M. and Bakhshandeh G.R., "Studies on Dynamic Vulcanization of PP/NBR Thermoplastic Elastomer Blends", Iranian Polymer Journal, 8, 37-42 (1999).
 
44. Ghoreishy, M.H.R. and Razavi-Nouri, M., "A Three-Dimensional Finite Element Analysis of a Power-law Fluid in an Extrusion Die", Iranian Polymer Journal, 7, 277-287 (1998).
 
45. Razavi-Nouri, M. and Mehrabzadeh, M., "Studies on Rheological Behaviour of LDPE/EPDM Blends", Iranian Polymer Journal, 5, 237-241(1996).
 
46. Razavi-Nouri, M. and Morshedian, J., "Simulation of Stress-Strain Behaviour of Fibre Reinforced Cementitious Composites in Flexure", Iranian Journal of Polymer Science and Technology, 4, 226-234 (1995).
 
47. Razavi-Nouri, M. and Morshedian, J., "Impact, Compressive and Flow Properties of Fibre Reinforced Cementitious Composites", Iranian Journal of Polymer Science and Technology, 4, 134-140 (1995).
 
48. Razavi-Nouri, M. and Morshedian, J., "Tensile and Flexural Behaviour of Fibre Reinforced Cementitious Composites", Iranian Journal of Polymer Science and Technology, 4, 56-63 (1995).
 
49. Morshedian, J. and Razavi-Nouri, M., "Toughness and Ductility of Fibre Reinforced Cementitious Composites in Flexure'', Iranian Journal of Polymer Science and Technology, 3, 20-29 (1994).
 
 
b) Publications in Persian
 
1. Najafloo, B., Razavi-Nouri, M., and Rezadoust, A.M., "A Review on Fused Deposition Modeling Method", Basparesh, Submitted.
 
2. Tayefi, M., Razavi-Nouri, M., and Sabet, A., "Ethylene-Octene Copolymer/Nanocaly
Nanocomposites: 2- A Review on Mechanical Properties and Rheology", Basparesh, in press.
 
3. Tayefi, M., Razavi-Nouri, M., and Sabet, A., "Ethylene-Octene Copolymer/Nanocaly Nanocomposites: 1- A Review on Morphology, Crystalization and Thermal Properties", Basparesh, 5, 4-15 (2015/1394).
 
4. Mohebbi, M., Razavi-Nouri, M., and Sabet, A., "Investigation on Morphology and Physical and Mechanical Properties of EVA/Clay Nanocomposites", Basparesh, 4, 4-20 (2014/1393).
 
5. Esmizadeh, E., Razavi-Nouri, M. and Kalati-Vahid, A., "Positron Annihilation Life-time Spectroscopy (PALS) II. Introduction and Applications in Polymer Science", Basparesh, 2, 22-29 (2012/1391).
 
6. Esmizadeh, E., Razavi-Nouri, M. and Kalati-Vahid, A., "Positron Annihilation Life-time Spectroscopy (PALS) I. Introduction and Applications in Polymer Science", Basparesh, 2, 4-12 (2012/1391).
 
7.  Salimi, A., Yousefi, A. A. and Razavi-Nouri, M., "Temperature Dependency of Poly(vinilidine Fluoride) Chain Dimension in Solution and Melt State", Iranian Journal of Polymer Science and Technology, 25, 31-40 (2012/1391).
 
8. Razavi-Nouri, M., "Effect of Single-Walled Carbon Nanotubes on Non-isothermal Crystallization Kinetics of Polypropylene: Comparison of Ozawa and Cazé-Chuah methods", Iranian Journal of Polymer Science and Technology, 22, 53-61 (2009/1388).
     
9. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "3-Dimensional Modeling of Flow of Polymeric Fluids with Various Viscosities in an Extrusion Die Using Mixed Method and Tetrahedral Elements", Iranian Journal of Polymer Science and Technology, 21, 167-179 (2008/1387).
 
10. Sobhani, H., Yousefi, A.A. and Razavi-Nouri, M., "Investigation on the Effect of Extensional Flow on the b-Crystalline Phase Formation in Extruded PVDF Films", Iranian Journal of Polymer Science and Technology, 19, 43-51 (2006/1385).
 
11. Sabzali-Nasery, M.A., Oromiehie, A.R. and Razavi-Nouri, M., "Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method", Iranian Journal of Polymer Science and Technology, 19, 13-21 (2006/1385).
 
12. Razavi-Nouri, M., "Polymer Impregnated Concrete-A review", Iranian Journal of Polymer Science and Technology, 7, 45-55 (1998/1377).
 
c) Publications in Persian as short notes
 
1. Jafarzadeh-Dogouri, F., Razavi-Nouri, M., "Plastics-Wood Composites-Part 1", Panjereh, no. 9, 42-45 (2008/1387).
 
2. Jafarzadeh-Dogouri, F., Razavi-Nouri, M., "Plastics-Wood Composites-Part 2", Panjereh, no. 10, 38-41 (2008/1387).
 
3.  afarzadeh-Dogouri, F., Razavi-Nouri, M., "Preparation of Plastics-Wood Composites", Panjereh, no. 12, 32-33 (2008/1387).
 
 
d) Presentations in National and International Seminars
 
1. Hakim, S., Razavi-Nouri, M. and Jafari, B., "Effect of Graphene Nanoplatelets on the Mechanical Properties, Crystallization and Dynamic Mechanical Behavior of
Poly(etheylne-g-maleic anhydride)", The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 16-17 December 2014,
Iran University of Science and Technology, Tehran, Iran.
 
2. Hosseini, M., Esfandeh, M., Razavi-Nouri, M. and Rezadoust, A.M., "Mechanical Properties of the Epoxy Resin-Based Composites Toughened by CTBN Rubber",
11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical  Institute, Tehran, Iran.
 
3Razavi-Nouri, M., Sabet, A. and Tayefi, M., "Effect of Dynamic Cross-Linking on Physical and Mechanical Properties of Nanoclay-Containing Nanocomposites Based on
Ethylene-Octene Copolymer", 11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran.
 
4Razavi-Nouri, M., Sabet, A. and Mohebbi, M., "Effect of Dicumyl Peroxide Content on the Mechanical Properties of EVA/NBR/Organoclay Vulcanized Nanocomposites",
11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran.
 
5. Bayazian, H., Morshedian, J., Jamshidi, A. and Razavi-Nouri, M., "Processing, MD and TD Stretching of Cast Polypropylene Film and Evaluation of Film Performance",
11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical  Institute, Tehran, Iran.
 
6. Jafari, B., Hakim, Sh. and Razavi-Nouri, M., "Crystallization and Dynamic Mechanical Behavior of Graphene Nanoplatelets– Poly(ethylene-g-maleic anhydride) Nanocomposites", 11th International Seminar on Polymer Science and Technology, 6-9 October 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran.
 
7. Hosseini, M., Esfandeh, M., Razavi-Nouri, M. and Rezadoust, A.M., "Effect of Alumina Nanoparticles on the Fracture Toughness of Hybrid Epoxy-Rubber Nanocomposites",
5 th International Conference on  Nanostructures, 6-9 March 2014, Kish Island, Iran.
 
8. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Simulation of Non-Newtonian Fluids Flow in Twin Screw Extruders", 10th International Seminar on Polymer Science and Technology, 21-25 October 2012, AmirKabir University of Technology, Tehran, Iran.
 
9. Hajibaba, A., Naderi, Gh., Ghoreishy, M.H.R., Bakhshandeh, Gh.and Razavi-Nouri, M., "Effect of Single Walled Carbon Nanotube on Mechanical and Morphological Properties of Dynamically Vulcanized Thermoplastic Elastomer Based on NBR/PVC", PPS 2011, Asia/Australia Regional Meeting, 14-17 November 2011, Kish Island, Iran.
 
10. Momtaz, M., Barikani, M. and Razavi-Nouri, M., "Synthesis & Characterization of Segmented Shape Memory Polyurethanes: Effect of Soft Segment Length, Hard Segment & Ionic Group Content on Different Properties", 17th Iranian Seminar of Organic Chemistry,
University of Mazandaran, 13-15 October 2010, Babolsar, Iran.
11.Tamaskani, M.,  Bakhshandeh Gh.and Razavi-Nouri, M., "Comparison the Effect of Natural Rubber, Conventional Fillers and Nanoclay on the Modification of Mechanical Properties of Butadiene Rubber", 10th Iran Rubber Industries Conference & Expo, 30th November-2nd December 2010, Iran Polymer and Petrochemical Institute, Tehran, Iran.
 
12. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Quasi Steady-State Simulation of Polymeric Fluids Flow in an Intermeshing Co-rotating Twin Screw Extruder (TSE)", 9th International Seminar on Polymer Science and Technology, 17-21 October 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.
  
13. Sobhani, H., Ghoreishy, M.H.R., Razavi-Nouri, M. and Anderson, P. "Transient Simulation of Polymeric Fluids Flow in an Intermeshing Co-rotating Twin Screw Extruder Using Fictitious Domain Method", 9th International Seminar on Polymer Science and Technology, 17-21 October 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.
  
14. Razavi-Nouri, M., Naderi, Gh., Parvin, A. and Ghoreishy, M.H.R.,"Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on NBR/PP", 25th Annual Meeting of the Polymer Processing Society (PPS-25), 1-5 March 2009, Goa, India.
  
15. Taghizade, E., Naderi, Gh. and Razavi-Nouri, M., "Nanocomposite Thermoplastic Elastomer Based PA6/ECO: Rheology and Morphology", 1st International Conference on Composite: Characterization, Fabrication & Application (CCFA-1), 15-18 December 2008, Kish Island, Iran.
 
16. Oromiehie, A.R., Sabzali Nasery, M.A. and Razavi-Nouri, M., "Polypropylene Nucleated with a Sorbitol Derivative and Maleic Anhydride Grafted Polypropylene: An Investigation on Crystallization and Polarity", Macro- and Supramolecular Architectures and Materials: Synthesis, Properties and Applications (MAM-08), 7-11 September 2008, Heinrich Heine Universität, Düsseldorf, Germany, P.312-313.
 
17. Naderi, Gh., Razavi-Nouri, M. and Taghizade, E., "Preparation of Nanocomposite Thermoplastic Elastomer Based on ECO/PA6", Polymer Processing Society, 24th Annual Meeting, 15-19 June 2008, Salerno, Italy, P.428.
18. Sobhani, H., Ghoreishy, M.H.R. and Razavi-Nouri, M., "Three-Dimensional Simulation of Flow of Polymeric Fluids in an Extrusion Die Using Mixed Finite Element Method and Tetrahedral Elements", 1st  National Conference on CFD Application in Chemical Engineering, 14-15 May 2008, Razi University, Kermanshah, Iran (in Persian).
 
19. Sobhani, H., Yousefi, A.A., Razavi-Nouri, M. and Ghoreishy, M.H.R., "Simulation of Extensional Flow in a Two-Channel Die for PVDF Film Extrusion", ISPST 200723-25 October 2007, Sharif University, Tehran, Iran.
 
20. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Preparation and Characterization of Novel Polyurethane/Polybenxoxazine Interpenetrating Polymer Networks", ISPST 2007, 23-25 October 2007, Sharif University, Tehran, Iran.
 21. Yeganeh, H., Razavi-Nouri, M. and Ghaffari, M., "Novel Electrical Insulators from Alloys of High Molecular Weight Polybezoxazine Precursor and Blocked Polyurethanes", ISPST 2007, 23-25 October 2007, Sharif University, Tehran, Iran.
 
22. Morshedian, J., Razavi-Nouri, M. and Faghihi, F., "Morphology and Rheo-Mechanical Behaviour of LDPE/PDMS Blends: Modeling and Effect of Reactive Blending", UNESCO/IUPAC Conference on Macromolecules: Polymers for Advanced Applications,
20-23 November 2006, Stellenbosch, South Africa.
 
23. Mohammadnia, Z., Zohuriaan-Mehr, M.J., Kabiri, K. and Razavi-Nouri, M., "Tragacanth Gum-graft-polyacrylonitrile: Synthesis, Characterization and Hydrolysis", 13th Iranian Seminar of Organic Chemistry, 7-9 September 2006, Bu-Ali Sina University, Hamedan, Iran.
 
24. Sobhani, H., Yousefi, A.A. and Razavi-Nouri, M., "Phase Transitions During Stretching of PVDF Films", ISPST 2005, 27-29 September 2005, AmirKabir University of Technology, Tehran, Iran.
 
25. Sabzali Nasery, M.A., Oromiehie, A.R. and Razavi-Nouri, M., "Modification of Gas Permeability of Polypropylene by Nucleating Agent and Functionalized Polypropylene", ISPST 2005, 27-29 September 2005, AmirKabir University of Technology, Tehran, Iran.
 
26. Sabzali Nasery, M.A., Oromiehie, A.R. and Razavi-Nouri, M., "Synchronous Effect of PP-g-MA and Diparamethyl Dibenzylidene Sorbitol (MDBS) Additives on the Increasing Crystallization Temperature of Polypropylene", ISPST 2005, 27-29 September 2005,
AmirKabir University of Technology, Tehran, Iran.
 
27. Yousefi, A.A., Razavi-Nouri, M. and Salimi, A., "Temperature Dependency of the End-to-End Distance of PVDF Chains Using Rheological Measurements", IChEC9, 23-25 November 2004, Tehran, Iran (in Persian).
28. Razavi-Nouri, M. and Hay, J.N., "Crystallization Behaviour of Polypropylene and Metallocene Polyethylene Blends", World Polymer Congress, IUPAC Macro 2004, 4-9 July 2004, Paris, France.
 
29. Ghoreishy M.H.R and Razavi-Nouri, M., "Modeling the Flow of TPEs in the Metering Zone of Single Screw Extruders Using Helical Geometry Model", World Polymer Congress, IUPAC Macro 2004, 4-9 July 2004, Paris, France.
 
30. Salimi, A., Yousefi, A.A. and Razavi-Nouri, M., "Effect of Solvent on Conformational Transformations of Poly(vinylidine fluoride)", World Polymer Congress, IUPAC Macro 2004, 4-9 July 2004, Paris, France.
 
31. Razavi-Nouri, M. and Hay, J.N., "Anisotropic Properties of Metallocene
Polyethylenes", ISPST 2003, 12-15 May 2003, Iran Polymer and Petrochemical Institute,
Tehran, Iran.
 
 
32. Razavi-Nouri, M. and Hay, J.N., "Crystallization Kinetics of Metallocene Polyethylene",
The 8th Iranian Students Seminar in Europe, 5-7 May 2001, Manchester, UK.
 
33. Ghoreishy, M.H.R. and Razavi-Nouri, M., "Simulation of Flow in Single Screw
Extruders Using Finite Element Method", Fifth Seminar on Polymer Science and Technology,
12-14 September 2000, Tehran, Iran.
 
34. Razavi-Nouri, M. and Hay, J.N., "Thermal and Mechanical Properties of Metallocene Polyethylene and Polypropylene Blends”, 7th Iranian Students Seminar in Europe, 20-21 May 2000, UMIST, Manchester, UK.
 
 
Iranian Patents
 
1. Jafarzadeh-Doguri, F., Razavi-Nouri, M., Oromiehie, A.R. and Ershad Langroudi, A., "Preparation of Artificial Wood Profile from Polypropylene and Rice Husk", Iranian Patent No. 34898 (2006/1385).
 
2. Oromiehie, A.R., Jafarzadeh-Doguri, F., Razavi-Nouri, M. and Ershad Langroudi, A., "Preparation of Artificial Wood Profile from Recycled Polypropylene, Poly(ethylene terephthalate) and Rice Husk", Iranian Patent No. 34899 (2006/1385).
 
3. Taghizade, E., Naderi, Gh. and Razavi-Nouri, M., "Preparation of Thermoplastic Elastomer Nanocomposites Based on PA6/ECO/Nanoclay", Iranian Patent No. 50485 (2008/1387).
 
4. Parvin, A., Razavi-Nouri, M., Naderi, Gh. and Ghoreishy, M.H.R., "Preparation of Thermoplastic Elastomer Nanocomposites Based on PP/NBR/Nanoclay", Iranian Patent No. 53379 (2008/1387).
 
5. Hajibaba, A., Naderi, Gh., Ghoreishy, M.H.R., Bakhshandeh, Gh. and Razavi-Nouri, M., "Preparation of Dynamically Vulcanized Thermoplastic Elastomer Nanocomposites Based on PVC/NBR/Single Walled Carbon Nanotube", Iranian Patent No. 30479 (2011/1390).

 Interested Research Fields

1.  Nanoclay, carbon nano-tube and graphen-filled nano-composites;
2.  Isothermal and non-isothermal crystallization kinetics of polymers and blends;
3.  Investigation on the effects of structure on the physical and mechanical properties of  
 polymers; copolymers, polymer blends and composites;
 
4.  Effect of physical aging in glassy thermoplastics and morphology in partially crystalline
 polymers;
 
5.  Rubber toughened plastics and thermoplastic elastomer materials;
 
6.  Thermal analysis of polymers;
 
7.  Fused deposition modeling (FDM)
 
8.  Polymer modified cementitious composites
 
9.  Characterization of polymers using different techniques
 
 
Teaching Experiences
Ph.D. Courses:
1.  Advanced Physical Chemistry of Polymers (2007, 2008, 2009, 2010, 2011, 2012).
M.Sc. Courses:
1.  Physical and Mechanical Properties of Polymers (2004, 2005).
 
2. Engineering Properties of Polymers (2005, 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015).
 
3. Advanced Physical Chemistry of Polymers (2006, 2010, 2011, 2012, 2013, 2014, 2015).
 
 
 
 

Supervising of the Graduated Students
 

Students Graduated
(S=Supervisor, CS=Co-superviser, A= Adviser)
Thesis Title University
 
(1) H. Sobhani (M.Sc., March 2005) CS
 
An Investigation on the Crystalline Structure of PVDF Film Extruded Through a Two-Channel Die Iran Polymer and Petrochemical Institute (IPPI)
(2) M.A. Sabzali-Nasery (M.Sc., October 2005) A
 
The Effect of Nucleating and Clarifying Agents on the Optical Properties of Polypropylene Films Iran Polymer and Petrochemical Institute (IPPI)
(3) F. Faghihi (M.Sc., July 2006) CS
 
 
Investigation of the Influence of Composition and Reactive Blending on Compatibility, Morphology and Properties of LDPE/PDMS Blends Iran Polymer and Petrochemical Institute (IPPI)
(4) F. Jafarzadeh (M.Sc., August 2006) A
 
Investigation on the Possibility Usage of Recycled PET in PP Filled Rice Husk Flour Iran Polymer and Petrochemical Institute (IPPI)
(5) M. Ghaffari (M.Sc., October 2007) CS
 
Preparation and Investigation of Physical, Mechanical and Electrical Properties of Novel Type of Poly(urethane- benzoxazines) Iran Polymer and Petrochemical Institute (IPPI)
(6) H. Sobhani (Ph.D., 30 June 2010) CS
 
Numerical Simulation of Polymer Flow in a Twin- Screw Extruder Iran Polymer and Petrochemical Institute (IPPI)
(7) M. Ghorbanzadeh-Ahangari (M.Sc., 2008) S
 
An Investigation on the Thermal and Mechanical Properties of PP/Carbon Nanotube Nanocomposites Semnan Azad University
(8) E. Taghizadeh (M.Sc., September 2008) CS
 
Preparation of Nanocomposite Thermoplastic Elastomers Based on PA6/ECO Iran Polymer and Petrochemical Institute (IPPI)
(9) M. Tamaskani (M.Sc., 1st February 2011) CS
 
Comparison of Reinforcing Effect of Active Fillers and Nanoclay on BR Matrix Iran Polymer and Petrochemical Institute (IPPI)
(10) M. Momtaz (M.Sc., 1st March 2011) CS
 
Synthesis and Characterization of Shape Memory Polyurethane Iran Polymer and Petrochemical Institute (IPPI)
(11) M. Karami (M.Sc., 12th February 2012) S
 
Preparation of Thermoplastic Elastomer Nanocomposites Based on EVA and NBR Iran Polymer and Petrochemical Institute (IPPI)
(12) M. Hoseini (M.Sc., 1st Jan.  2014) CS
 
Study of the Effect of Nano-Alumina Particles on Physical and Mechanical Properties of Rubber-Toughened Epoxy Resin Iran Polymer and Petrochemical Institute (IPPI)
(13) M. Imani (M.Sc., 1st Jan. 2014) S Study on the Effect of Single-Walled Carbon Nanotubes on the Physical and Mechanical Properties of Polyolefin Elastomer Iran Polymer and Petrochemical Institute (IPPI)
(14) M. Mohebbi (M.Sc., Feb. 2015) S
 
Preparation of Dynamically Vulcanized Thermoplastic Elastomer Nanocomposites Based on EVA and NBR Iran Polymer and Petrochemical Institute (IPPI)
(15) M. Tayefi (M.Sc., Feb. 2015) S
 
Study on the Effect of Curing on Physical and Mechanical Properties of Poly(ethylene-co-octene)/OMMT Nanocomposites Iran Polymer and Petrochemical Institute (IPPI)
(16)  B. Jafari  (M.Sc., Feb. 2015) A Characterization of Microstructure and Study of the Physical-Mechanical Properties and Rheological Behavior of Ethylene 1-Butene Copolymer/Graphene Iran Polymer and Petrochemical Institute (IPPI)
(17)  H. Bayazian  (M.Sc., 18th October  2015) A Effect of MD and TD Stretching on Morphology and Properties of Cast PP Film   Iran Polymer and Petrochemical Institute (IPPI)
(18)  F. Barzegari (M.Sc., to be finished in 2017) CS Developing Microporous PP Membranes/or Films by Incorporating Hollow Microsphares and Stretching Iran Polymer and Petrochemical Institute (IPPI)

 
 
Honors and Awards
 
1. Commendation from vice-chancellor of The Tehran University, Dr. Afrouz, for the first class honors in my M.Sc. program in 1993.
 
2. Award of a full scholarship from The Iranian Ministry of Science, Research and Technology for my Ph.D. program in the UK (1998-2002).
 
3. Selected by Iran Polymer and Petrochemical Institute and awarded by the Director of the Institute as a member of the best research group in 2003.
 
4. Selected by Iran Polymer and Petrochemical Institute and awarded by the Director of the Institute as a member of the best research group in 2006.
 
5. A Member of center of excellence for "Polymer Processing and Polymeric Coatings", Ministry of Science, Research and Technology of Iran, 2012-Present.
 
Other Professional Activities Professional Activities
 
1. The head of central laboratories of Iran Polymer and Petrochemical Institute from Sep. 2012-May 2015.
 
2. Reviewer of the following published books (translated and authored in Persian):
 
(a) Mechanical Properties of Polymers and Composites, Written by Lawrence E. Nielsen and Robert E. Landel, Translated in Persian by E. Ghasemi, M. Minaei-Zaeem and M. Ryahi-Nezhad, Published by Iran Polymer and Petrochemical Institute, 2010.
 
(b) Principles of Physical Chemistry in Polymers, Written in Persian by H. A. Khonakdar, S. H. Jafari and J. Seifi, Published by Iran Polymer and Petrochemical Institute, 2013.
 3. Frequently reviewer of the following journals:
     (a) Journal of Applied Polymer Science (published by John Wiley & Sons, Ltd)
     (in English)
     (b) Polymer International (published by Society of Chemical Industry (SCI) and John  
     Wiley & Sons, Ltd) (in English)
     (c) Polymer Engineering and Science (published by John Wiley & Sons, Ltd)
     (in English)
     (d) Colloid and Polymer Science (published by Springer) (in English)
     (e) e-Polymers (The Scientific e-Only Polymer Journal) (in English)
     (f) Materials Science & Engineering A (Published by Elsevier) (in English)
     (g) Iranian Polymer Journal (published by Iran Polymer and Petrochemical Institute)
     (in English)
     (h) eXPRESS Polymer Letters (published by Budapest University of Technology and
     Economics) (in English)
     (i) Journal of Polymer Engineering (in English)
     (j) Journal of Polymer Research (published by Springer) (in English)
     (k) Journal of Reinforced Plastics and Composites (published by Sage)  (in English)
     (l)  Polyolefins Journal (published by Iran Polymer and Petrochemical Institute)
     (in English)
     (m) Iranian Journal of Chemical Engineering (published by Iranian Association of
     Chemical Engineers) (in English)
     (n) Iranian Journal of Polymer Science & Technology (published by Iran Polymer
     Society) (in Persian)
     (o) Iranian Journal of Chemistry and Chemical Engineering (in Persian)
     (p) Building Engineering and Housing Service (published by Building and Housing
     Research Center) (in Persian)
 
4. A member of scientific committee and session chair of physical chemistry of polymers in ISPST 2014.
5. The reviewer of papers submitted to seminars concerning to polymer science and engineering in Iran.
 6. Organizer and lecturer of the following workshops:
      (a) Crystalline Polymers: Structure and Morphology
      (b) Polyethylene: Structure, Properties and Applications
 7. A member of the committee for preparation of national standards for "Thermal Insulation Products for Buildings" and also the head of the national standard committee in a few occasions.