CURRICULUM  VITAE

 

Azizollah Nodehi

 

 

Personal Information  .
Name: Azizollah
Surname: Nodehi
Date of birth:1970
Position: Member of Academic Staff
E-mail addresses: A.nodehi@ippi.ac.ir
Postal address:
Department of Process Modeling and Control, Faculty of Polymerization Engineering, Iran Polymer & Petrochemical Institute (IPPI), P.O. Box 14965 -115, Tehran, Iran

Educational Records
B.Sc. in Chem. Eng., Isfahan University of Technology, Isfahan, Iran, 1993.
M.Sc. in Chem. Eng., Faculty of Engineering, University of Tehran, Tehran, Iran, 1999.
Ph.D. in Chem. Eng., School of Chemical Engineering, University College of Engineering, University of Tehran, Tehran, Iran, 2007.
Major Research Interests 

    Suspension & Emulsion Polymerization.
    Synthesis of Ion Exchange Resins.
    Core-Shell Systems.
    Mathematical Modeling and Simulation. 

Publications


Journal Papers

  1.     M. Sadat-Shojai, M. Atai, A. Nodehi, L. Khanlar, "Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: Synthesis and application", Dental Materials, Vol. 26, 5, 471-482, 2010.
  2.     M. Atai, L. Solhi, A. Nodehi, S. Mirabedini, S. Kasraei, K. Akbari, S. Babanzadeh, "PMMA-grafted nanoclay as novel filler for dental adhesives", Dental Materials, Vol. 25, 3, 339-347, 2009.
  3.     A. Nodehi, M. A. Moosavian, M. Nekoomanesh Haghighi and A. Sadr, "A New Method for Determination of the Adsorption Isotherm of SDS on Polystyrene Latex Particles Using Conductometric Titrations.", Chem. Eng. Technol., Vol. 30, 12, 1732-1738, 2007.
  4.     A. Nodehi, M. A. Moosavian, M. Nekoomanesh Haghighi and A. Sadr, "A Comparative Study on the Properties of ABS/Clay Nanocomposites Prepared by Direct Melt Intercalation and In-situ Emulsion Polymerization Techniques.", Iranian Polymer journal, Vol. 16, 3, 185-193,  2007.
  5.     A. Nodehi and M. Moosavian, “Simulation and Optimization of an adiabatic multi-bed catalytic reactor for oxidation of SO2”, Chem. Eng. Technol. , Vol. 30, 1, 84-90, 2007.
  6.     M. Hajiebrahimi, H. Arabi, M. Parvazinia and A. Nodehi, "Effect of Diluent type and composition, and the amount of Crosslinking Agent on the Surface Morphology of the Macroporous Styrene-Divinylbenzene Copolymer", Iranian Journal of Polymer Science and Technology, Vol. 19, 5, 361-367, 2006.
  7.     J. Morshedian, H. A. Khonakdar and A. Nodehi, "Mathematical and Computational Modeling of Heat Transfer and Deformation in Film Blowing Processes.", Journal of Applied Polymer Science, Vol. 86, 2115-2123, 2002.
  8.     H. A. Khonakdar, J. Morshedian, A. Nodehi and M. Mehrabzadeh, "Simulation of Film Blowing Processes: An Investigation on Heat Transfer and Deformation.", Iranian Journal of Polymer Science and Technology, Vol. 13, 2, 131-138, 2000.


Conference Papers

  1.     H. Salimi Kenari, M. Imani, A. Nodehi, "Experimental Design to Explore the Effective Parameters in Formulation of Dextran Microspheres via Emulsion Crosslinking Reaction", The 6th International Chemical Engineering Congress & Exhibition, (ICHEC 2009), Iran.
  2.     M. Sadat-Shojai, M. Atai, A. Nodehi, "An experimental design approach to determine the effect of process parameters on the properties of hydroxyapatite nanoparticles", The 6th International Chemical Engineering Congress & Exhibition, (ICHEC 2009), Iran.
  3.     S. Beigi Boroujeni, A. Nodehi, M. Atai, "Synthesis of low density polymeric microballoons via suspension polymerization", The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Iran.
  4.     M. Sadat-Shojai, M. Atai, A. Nodehi, "Effect of the hydroxyapatite nanofibers as a novel filler on the mechanical properties of an ethanol based one-bottle dental adhesive", The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Iran.
  5.     M. Sadat-Shojai, M. Atai, A. Nodehi, "Filler-reinforced dental adhesives: The effect of surface charge on the colloidal stability of filler", The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Iran.
  6.     L. Solhi, M. Atai, A. Nodehi, "Using Silica and Polymethacrylic acid grafted nanoclay in an experimental dental adhesive as fillers and Stability Investigation", The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Iran.
  7.     M. Sadat-Shojai, M. Atai, A. Nodehi, L. Nasiri Khanlar, "Bond strength of a novel dental adhesive to dentin: The in vitro study", The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Iran.
  8.     M. Sadat-Shojai, M. Atai, A. Nodehi, "Synthesis of nanosized hydroxyapatite particles: The morphology control", The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Iran.
  9.     M. Atai, A. Nodehi, L. Solhi, "Poly (acrylic acid) grafted nano-clay as novel nanofillers for dental adhesives", Frontiers in Polymer Science, 7–9 June 2009, Mainz, Germany.
  10.     A. Nodehi, M. A. Moosavian, M. Nekoomanesh Haghighi, Sh. Irani and A. Sadr, "Effect of Initiation Mode on the Graft Morphology and Grafting Efficiency of ABS Latex Particles", The 8th International seminar on polymer Science and technology (ISPST2007)", Iran.
  11.     M. Hajiebrahimi, M. Parvazinia, H. Arabi and A. Nodehi, " Study of Structural Characteristics of Porous Styrene-Divinylbenzene Copolymers", The 8th International seminar on polymer Science and technology (ISPST2007)", Iran.
  12.     L. Solhi, M. Atai, S. M. Mirabedini, A. Nodehi, " Surface Modification of Nanoclay Using Free Radical Graft Polymerization", The 8th International seminar on polymer Science and technology (ISPST2007)", Iran.
  13.     A. Nodehi, M. A. Moosavian, M. Nekomanesh Haghighi, M. Torabi Angaji, "Effect of Clay Addition Mode on the Properties of ABS/Clay Nanocomposites Prepared by in situ Emulsion Polymerization Technique.", The 1st International Congress on Nanoscience and Nanotechnology ( ICNN2006), Iran.
  14.     A. Nodehi, M. A. Moosavian, M. Nekomanesh Haghighi, M. Torabi Angaji, "Preparation and Characterization of Polybutadiene/Clay Nanocomposites by in situ Emulsion Polymerization and Latex Blending Methods", The 1st International Congress on Nanoscience and Nanotechnology ( ICNN2006), Iran.
  15.     L. Solhi, M. Atai, S. M. Mirabedini, A. Nodehi, S. Babanzadeh, " Stabilization of Nanoparticle Suspensions in Dilute Solutions", The 1st International Congress on Nanoscience and Nanotechnology ( ICNN2006), Iran.
  16.     L. Solhi, M. Atai, S.M. Mirabedini, A. Nodehi, S. Babanzadeh, "Application of nanoparticles in dental adhesive: stabilization of particles", The 6th Congress of Iranian Academy of Restorative Dentistry, Oct. 25-27, Iran, 2006.
  17.     A. Nodehi, H. Arabi, M. Parvazinia, M. Hajiebrahimi, "Study of Surface Morphology in Macroporous Polystyrene Networks", The 7th International seminar on polymer Science and technology (ISPST2005)", Iran.
  18.     M. Hajiebrahimi, M. Parvazinia, H. Arabi and A. Nodehi, " Investigation of the Effect of Toluene-Cyclohexane mixture as Diluent on the Surface Morphology and Internal Surface Area of the Porous Styrene-Divinylbenzene Copolymers", The 11th National Iranian Chemical Engineering Congress, 2003, Iran.
  19.     A. Nodehi, M. Parvazinia and M. Haji Ebrahimi, "Pilot Scale Production of Gel Type Strong Acid Cation Exchange Resins.", Proceeding of 18th Int. Power System Conference (PSC 2003), vo1. 2, Pages 1-9, 20-22 Oct. 2003, Tehran, Iran.
  20.     A. Nodehi, M. Parvazinia and M. Haji Ebrahimi ,"Preparation of Gel Type Strong Acid Cation Exchange Resins - Study of PS-DVB Sulfonation Reaction Kinetics.", 8th National Iranian Chemical Engineering Congress, Mashhad, 2003, Iran.
  21.     J. Morshedian, H. A. Khonakdar and  A. Nodehi, "Mathematical and Computational Modeling of Heat Transfer and Deformation in Film Blowing Processes.",PPS-2001, ANTALYA-TURKIYE .
  22.     H. A. Khonakdar, J. Morshedian and A. Nodehi,"Mathematical Modeling of Films Blowing Processes.", 5th Iranian Seminar on Polymer Science Technology, 12-14 September 2000,Amirkabir University, Tehran, Iran.
  23.     H. A. Khonakdar, J. Morshedian and A. Nodehi," Analysis of Stress and Strain in the Film Blowing Processes.",5th National and 4th International Chemical Eng. Congress ,April 24-27,2000, Shiraz, Iran.
  24.     H. A. Khonakdar, J. Morshedian and A. Nodehi,"Simulation of Film Blowing Processes: An Investigation on Heat Transfer and Deformation.",5th National and 4th International Chemical Eng. Congress ,April 24-27,2000, Shiraz, Iran.
  25.     M. Moosavian, F. Jalali Farahani, A. Emamzadeh and A. Nodehi,"Simulation and Optimization of the Performance of an adiabatic Catalytic reactor for Conversion of SO2 to SO3.", 4th National Iranian Chemical Eng. Congress ,March 9-11,1999,Tehran, Iran.
  26.     M. Moosavian, F. Jalali Farahani, A. Emamzadeh and A. Nodehi,"Investigation of Behaviour of Effectivness Factor along an Adiabatic Catalytic Reactor."13th Iranian Chemistry and Chemical Eng. Congress ,February 16-18,1999,Tehran, Iran.


 
Patents

  1.     M. Sadat-Shojai, M. Atai, A. Nodehi, "Optimization of the Efficient Operating Parameters in the Synthesis of Hydroxyapatite Nanoparticles by Hydrothermal Process" Iranian Patent, 61610, 2009.
  2.     M. Sadat-Shojai, M. Atai, A. Nodehi, "Preparation of a Novel Dental Bonding System Containing Biocompatible Nanoparticles", Iranian Patent, 61611, 2009.
  3.     H. Arabi, M. Haji Ebrahimi, M. Parvazinia, A. Nodehi, "Preparation of Macroporous Styrene-Divinylbenzene Copolymer for Use in Industrial Catalysts", Iranian Patent 35092, 2006.
  4.     M. Parvazinia, A. Nodehi, M. Haji Ebrahimi, “Pilot Scale production of Strong Acid Cation Exchange Resins Based on Styrene-DVB Copolymers”, Iranian Patent 29423, 2004.



 
 Last updated: Apr 2010