Curriculum Vitae
Foroud Abbassi Sourki (PhD, MSc., BSc.)
Personal Information
Assistant Professor
Department of Rubber Material and Processing, Faculty of Polymer Processing Address Iran Polymer & Petrochemical Institute, Km 15 Tehran-Karaj Highway, Pajouhesh Blvd., Tehran, I.R. Iran, Postal Code: 1497713115,P.O. Box: 14965/115 Phone: (+9821)48662461 Fax: (+9821)44580021-23 f.abbasi@ippi.ac.ir, foroud52@yahoo.com Education PhD in Polymer Engineering (2010) Chemical Engineering Department Laval University, Quebce, QC, Canada, Research subject: Effect of Block Copolymer Modification on Shear Induced Morphology Evolution (Drop Deformation and Breakup) in Immiscible Polymer Blends. M.Sc. Polymer Engineering (1995) Tehran University in cooperation with Iran Polymer and Petrochemical Institute, Tehran-Iran Thesis: Peroxide Crosslinking of Low Density Polyethylene (LDPE) and Investigation of its Physical and Mechanical Properties B.Sc. Polymer Engineering (1991) Amir Kabir University of Technology, Tehran-Iran Thesis: Investigation and Optimization of Stress Relaxation Properties of NR/IIR Blends Languages
Persian: Mother tongue English: All skills French: Speaking, Reading and Writing Qualifications 1. Familiar with quite all polymer characterization tools. 2. Familiar with Matlab programming. 3. Familiar with SolidWork software. Research Experiences 1. Shear induced morphology development in immiscible polymer blends in the absence and presence a surface active agent. 2. Rheology of polymers and multiphase systems. 3. Investigation of Peroxide Crosslinking of Low Density Polyethylene and its Effect on the Physical and Mechanical Properties of the Polymer. 4. Synthesis of HNBR by Hydrogenation of NBR using Heterogeneous Palladium Catalyst. 5. Investigation of Reaction Parameter on Hydrogenation of Unsaturated Rubbers and Determination of Unsaturation Degree using Instrumental Method. 6. Characterization and Making Rubber Sponge Balls from NR Latex. 7. Study of Molecular Fracture Phenomena and their Influencing Parameters in Rubbers. 8. Two-Layer Hoses Technology Development (CR and NBR/PVC). 9. Analysis and Characterization of Industrial Polymeric Parts. 10. Making and Chemical and Mechanical Characterization of EPDM Foam used as Vibration Absorber in Car Cooler. 11. Preparation of a Data Bank in Polymers Science and Technology. 12. Rubber Nanocomposites, Morphological, Rheological and Viscoelastic investigation Work Experiences 1. Academic member of Iran Polymer and Petrochemical Institute, 1995-2004. 2. Making Very low density LDPE closed cell foams. 3. Standardization of rubber and plastic automotive parts, Sazeh Gostar-e-Saipa Co. 4. Production of liquid and powdered antioxidant for non-black rubber vulcanizates in pilot-plant scale, Raika Pajouhesh Co. 5. Production of silicone orings in pilot-plant scale. Publications 1. Abbassi Sourki F., Morshedian J. “On the Improvement of Physical and Mechanical Properties of PE by Crosslinking, Iranian Journal of Polymer Science and Technology”, Vol.14, No.2, 2001, “Persian Eddition”. 2. Abbassi Sourki F., Jalilian M. “Instrumental Investigation of Nitrile Rubber Hydrogenating Parameter, Iranian Journal of Polymer Science and Technology”, Iranian Journal of Polymer Science and Technology”, Vol.14, No.6, 2002, “Persian Eddition”. 3. Bakhshandeh G., Mirzadeh H., Khorasani M., Abbassi Sourki F., Shokrollahi F., Parvin A. “Preparation and Investigation of Mechanical and Blood Compatibility Properties of Silicone Oring used in Blood Dialysis Filter, Iranian Journal of Polymer Science and Technology” Iranian Journal of Polymer Science and Technology”, Vol.16, No. 1, p. 41-49, 2003, “Persian Eddition”. 4. Abbassi Sourki F., Soltani. S. “Effect of Carbon Black Type on Viscoelastic Properties of Elastomeric Compounds, Iranian Journal of Polymer Science and Technology” Iranian Journal of Polymer Science and Technology”, Vol. 17, No. 1, 37-42, 2004, “Persian Eddition”. 5. Ravati S., Ghoreishy M.H.R., Bakhshandeh G.R., Abbassi Sourki F. “Study of Rheological Properties of Rubber/Carbon Black Compounds During Incorporation Stage in Internal Mixers”. Iranian Journal of Polymer Science and Technology, Vol.18, (3), 159-169, 2005, “English Edditon”. 6. Soltani S., Abbassi Sourki F. “Effect of Carbon Black Type on Viscous Heating, Heat build up, and Relaxation Behavior of SBR Compounds”, Iranian Polymer Journal, 14 (8), 2005, 745-751, 2005, “English Edditon”. 7. Abbassi-Sourki F., Huneault MA., Bousmina M. “Effect of Compatibilization on the Deformation and Breakup of Drops in Step-Wise Increasing Shear Flow” Polymer 50. 645-653, 2009. 8. Abbassi-Sourki F., Huneault MA., Bousmina M. “Effect of interfacial modifier on single drop deformation and breakup in step increasing shear flow” Rheologica Acta., 51 (2), 111-126, 2011. Conference Papers 1. Abbasi Sourki F. Morshedian J. “Peroxide Crosslinking of Low Density Polyethylene” 2nd International Seminar on Polymer Science and Technology, Nov. 3-5, 1997, Iran Polymer Institute, Tehran, Iran. 2. Abbasi Sourki F., Jalilian M. “Hydrogenation of General Purpose Rubbers to Reach Special Purpose Rubbers” 7th Iranian Congress of Chemical Engineering, Oct. 28-31, 2002, Tehran, Iran , “Persian Eddition” . 3. Morshedian J., Abbasi Sourki F. “Nonlinear Creep Behavior of Peroxide Crosslinked Low Density Polyethylene” 6th Iranian Seminar on Polymer Science and Technology, May 12-15, 2003, Iran Polymer and Petrochemical Institute, Tehran, Iran. 4. Jalilian M., Abbasi Sourki F., Atai M., Ziaee F. “Investigation of Crystallinity of Chlorinated Polyethylene” 6th Iranian Seminar on Polymer Science and Technology, May 12-15, 2003, Iran Polymer and Petrochemical Institute, Tehran, Iran. 5. Karrabi M., Abbasi Sourki F., Atai M. “Effect of Tire Tread Compound Mixing Quality on the Air Pollution” 2nd National Seminar of Chemistry and Environment, Jan. 27-29, 2004, Isfahan, Iran, 4 Pages. 6. Karrabi M., Abbassi Sourki F. “Relationship between Mixing Quality and Viscoelastic Parameters Obtained from HAAKE mixer and RPA” Malaysian Chemical Congress (MCC2004) Sept. 27-29, 2004. 7. Mahdavian A.R., Abdollahi M., Abbassi Sourki F. “The Comparison between Initial Charge, Shot and Modified Shot Processes and their Effects on Macrostructure of Particles in Emulsion Copolymerization of Styrene- butadiene- acrylic acid” 9th National Congress of Chemical Engineering, Tehran, Iran, November 2004. 8. Ravati S., Ghoreishy M.H.R., Bakhshandeh Gh., Abbassi Sourki F. “A Mixing Dependent Approach for Rubber/Carbon Black Compounds in Internal Mixers” ISPST2005. Sept. 27-29, 2005, Tehran, Iran. 9. Ravati S., Ghoreishy M.H.R., Bakhshandeh Gh., Abbassi Sourki F. “Mathematical Model for Determination of the Real Content of Carbon Black in carbon Black/Rubber Agglomerates” ISPST2005. Sept. 27-29, 2005, Tehran, Iran. 10. Mahdavian A.R., Abdollahi M., Abbassi Sourki F. “The Effect of Carboxylic Groups on Properties of the Vulcanized Carboxylated SBR” 7th International Seminar on Polymer Science and Technology, ISPST, Tehran, Iran, October 2005. 11. Abbassi Sourki F., Bousmina M. “Deformation and Breakup Mode of Clean and Compatibilized immiscible Droplets Characterizing with a Large Viscosity Ratio” Centre for Applied Research on Polymers and Composites, CREPEC. Dec. 2006, Montreal, Canada. 12. Abbassi Sourki F., Bousmina M. “Effect of Compatibilization on Rheological Behavior of Immiscible Polymer Blends” Centre for Applied Research on Polymers and Composites, CREPEC. Dec. 2007, Montreal, Canada. 13. Abbassi Sourki F., Bousmina M. “Visualization of Compatibilized Drop Breakup in Immiscible Polymer Blends under Shear Flow” Centre for Applied Research on Polymers and Composites, CREPEC. Dec. 2008, Montreal, Canada. 14. Bakhshandeh GR., Abbassi Sourki F., Alimardani M. “The Effect of Functionality of CNT on the Rheological Propertioes of XSBR latex-MWCNT nanocomposites” 2nd National Seminar on the Application of Nanoscience in Defence, 15-16 Feb, 2012, Emam Hossein University, Tehran, Iran. 15. Bakhshandeh GR., Abbassi Sourki F., Alimardani M. “Preparation and Investigation of Rheological Properties of XSBR latex-MWCNT nanocomposites” 2nd National Seminar on the Application of Nanoscience in Defence, 15-16 Feb, 2012, Emam Hossein University, Tehran, Iran. Theses Co-Supervised 1. Kinetics and mathematical modeling of the changes in rheological behavior of carbon black filled compounds in internal mixers. 2. Design and optimization of white sidewall compounds for steel belted radial tires. 3. Synthesis of carboxilated styrene-butadiene rubber via emulsion polymerization. 4. Preparation and investigation of the effect of coupling agent and interfacial modifiers on SBR latex- MWCNT nanocomposite morphology. 5. Morphology investigation in high temperature thermal polymerization of Styrene. Courses Taught 1. Rubber technology workshop I. 2. Elastomer. 3. Physical and mechanical testing methods. 4. Rubber chemistry and technology. Trainings 5. Three-month training at Iran Tire Co. tire maker, Tehran, Iran. 6. Three-month training in PVC compounding at Iran Baika Co., Shiraz, Iran. 7. A short period Plastic Machinary Training organized by Cesap, Italy. References 1. Prof. Mosto Bousmina, Royal Academy of Science and Technology, INANOTECH (Institute of Nanomaterials and Nanotechnology), Rabat, Morocco, m.bousmina@academiesciences.ma 2. Prof. Michel Huneault, Chemical Eng. and Biotechnology Depart., Sherbrooke University, 2500, Boul. de l’Université, Sherbrooke (QC), Canada, J1K 2R1, Email address: michel.huneault@USherbrooke.ca 3. Prof. Diego Mantovani; Mine, Metallurgy, and Material Engineering Department, Laval University, Quebec (QC), Canada G1V 0A6, Email address: diego.mantovani@gmn.ulaval.ca Last Update: 2012/04/09 |
Abbasi Sourki, Foroud
Latest News