Curriculum Vitae

 

 

Jalal Barzin
(Ph.D., M.Sc., B.Sc.)

Full Professor  

 

 

Biomaterials Department, 

Polymer Science Faculty
PO Box 14965/115, Tehran, Iran,
Tel/ Fax:(9821) 48662509
E-mail
j.barzin@ippi.ac.ir
             


A. Education and Qualification:
 
B.Sc.; Chemical Engineering (Polymer Industries) , Isfahan University of Technology (IUT).
M.Sc.; Polymer Engineering, 
Iran Polymer and Petrochemical Institute (IPPI) .
Ph.D.; Polymer Engineering (2003), (IPPI).
Research Visiting: Collaboration with professor Takeshi Matsuura, Industrial Membrane Research Institute (IMRI), chemical engineering department, Ottawa University, Ottawa, Canada,2003.


B. Teaching Experience:
 
Membrane separation (M.Sc.)

Biomaterials (M.Sc.)

New application of polymeric materials (M.Sc.)

Polymer surface modification (Ph.D.)

Biocompatibility in nano scale (Ph.D.)

Mathematics for chemical engineering (B.Sc.)

 

C. Research Interests:
 
Hollow fiber and Flat sheet membranes manufacturing
Membranes for blood purification,

Biomaterials and Tissue engineering
Polymers in drug delivery systems
Hemodialysis, Reverse Osmosis, Ultra filtration, Micro filtration and Nano filtration
Thermodynamic of polymer solutions and Phase inversion studies
Membranes Renew and Cleaning
 

 

D. Journal Papers:


1) Barzin J., Madaeni S. S., Mirzadeh H., Mehrabzadeh M., Effect of polyvinyl pyrrolidone on morphology and performance of hemodialyssis membranes prepared from polyether sulfone, Journal of applied polymer science, 2004, 3804-3813.


2) Barzin J., Feng C., Khulbe K. C., Matsuura T., Madaeni S. S., Mirzadeh H., Characterization of polyethersulfone hemodialysis membrane by ultrafiltration and atomic force microscopy, Journal of Membrane science, 2004, 77-85.


3) Barzin J., Madaeni S. S., Mirzadeh H., Effect of Preparation Conditions on Morphology and Performance of Hemodialysis Membranes Prepared from Polyether Sulfone (PES) and Polyvinylpyrrolidone (PVP), Iranian polymer Journal, 2005, 353-360.


4) Madaeni S. S., Rahimpour A., Barzin J., Preparation of Polysulfone Ultrafiltration Membranes for Milk Concentration: Effect of Additives on Morphology and Performance, Iranian Polymer Journal, 2005, 421-428.


5) Barzin J., Azizi H., Morshedian J., Preparation of Silane-Grafted and MoistuCross-Linked Low Density Polyethylene: Part I: Factors Affecting Performance of Grafting and Cross-Linking, Polymer-Plastics Technology and Engineering, 2006, 979-983.


6) Barzin J., Madaeni S. S., Poormoghadasi S., Hemodialysis Membrane Prepared from Polyvinyl Alcohol: Effect of Preparation Conditions on Morphology and Performance, Journal of Applied Polymer Science, 2007, 2490-2497.


7) Azizi H., Barzin J., Morshedian J., Silane crosslinking of polyethylene: the effects of EVA, ATH and Sb2O3 on properties of the production in continuous grafting of LDPE, eXPRESS Polymer Letters, 2007, 378-384.


8) Barzin J., Azizi H. Morshedian J., Preparation of Silane-Grafted and Moisture Crosslinked Low Density Polyethylene, Part II: Electrical, Thermal and Mechanical Properties, Polymer-Plastics Technology and Engineering, 2007, 305-310.


9) Barzin J. Sadatnia B. Theoretical phase diagram calculation and membrane morphology evaluation for water/solvent/polyethersulfone systems, Polymer, 2007, 1620-1631.


10) Madaeni S. S., Esmaeili M., Barzin J., Preparation and Optimasation of Polyethersulphone- Based Composite Mmembranes for Air Separation at Low Pressures, Polymers & Polymer Composites, 2007, 579-590.

 

11) Zare M., Mobedi H., Barzin J., Mivehchi H., Jamshidi A., Mashayekhi R., Effect of Additives on Release Profile of Leuprolide Acetate in an In Situ Forming Controlled-Release System: In Vitro Study, Journal of Applied Polymer Science, 2008, 3781-3787.


12) Barzin J., Sadatnia B., Correlation between macrovoid formation and the ternary phase diagram for polyethersulfone membranes prepared from two nearly similar solvents. Journal of Membrane Science, 2008, 92-97.

 

13) Astaneh R., Erfan M, Barzin J., Mobedi H., Moghimi HR., Effect of ethyl benzoate on performance, morphology and erosion of PLGA implants formed in situ, Advances in Polymer Technology, 2008, 17-26.


14) Madaeni S. S., Barzin J., Jokar Z., Evaluation of the Morphology and Performance of Polyether Sulfone Reverse Osmosis Composite and Non-Composite Membranes, Polymers & Polymer Composites, 2009, 101-108.


15) Gholizadeh B., Arefazar A., Barzin J., Polycarbonate/ polyamide 6/ nanoclay ternary nanocomposite membranes: Preparation, characterization and gas separation properties, Polymers & Polymer Composites, 2009, 181-188.


16) Madaeni S. S., Rafiee E., Seyedzadeh Z., Barzin J., Effect of Dodeca_Tungstophosphric Acid on morphologh and performance of polyvinyl alcohol membrane for gas separation, Journal of Applied Polymer Science, 2009, 484-490.


17) Esmaeili M., Madaeni S. S., Barzin J., The dependence of morphology of solid polymer electrolyte membranes on transient salt type: effect of cation type, Polymer International, 2009, 1006-1013.


18) Farrokhzad H, Mobedi H, Barzin J, Poorkhalil A, Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in Situ Forming System based on Poly (lactide–co–glycolide), Iranian Jurnal of Polymer Siene and Technology ,2010, 495-505.


19) Chaee A, Shariaty – Niassar M, Barzin J, Matsuura T, Effects of chitosan membrane morphology on coper ion adsorption, Chemical Engineering Journal ,2010, 46-55.


20) Sorush A, Barzin J, Barikani M, The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration Composite Memranes Based on Polyether Sulfone, Iranian Jurnal of Polymer Siene and Technology, 2010, 213-222.


21) Madaeni S. S, Rafiee E, Seyedzadeh Z, Barzin J, Effect of Dodea – Tungstophosphoric Acid on Morphology and Performance of Polyethersulfone Membrane for Gaz Separation, Journal of polymer engineering, 2010, 109-133.

 

22) Mortazavi M., Mortaheb H. R., Barzin J., Mokhtarani B., Salehi Shahrabi S., Pervaporative Desulfurization of Thiophene/n- heptane by a composite membrane of PEG/PVP Blend on PES, World academy of science, engineering and technology, 2011, 202-206.

 

23) Esmaeili M., Madaeni S. S., Barzin J., Morphological dependency of polymer electrolyte membranes on transient salt type: effets of anion species, Polymer International, 2011, 362-370.

 

24) Pazokian H, Jelvani S, Barzin J, Mollabashi M, Abolhosseini S, Effect of spot size on cone formation in a XeCl laser ablation of polyethersulfone films, Optics Communications, 2011, 363-367.


25) H. Pazokian, S. Jelvani, M. Mollavashi, J. Barzin, G. Azizavadi Farahani, ArF laser surface modification of polyethersulfone film: Effect of laser fluence in improving surface biocompatibility, Applied Surface Science, 2011, 6186-6190.

 

26) H. Pazokian, M. Mollavashi, S. Jelvani, J. Barzin, SH. Abolhoseini, Etching of a polythersulfone film using a XeCl laser, Optical Engineering ,2011, 50, 84301-4.


27) H. Pazokian, A. Selimis, E. Stratakis, M. Mollabashi, J. Barzin, S. Jelvani, KrF laser ablation of a polyethersulfone film: Effect of pulse duration on structure formation, Applied Surface Science, 2011, 169-175.


28) N. Zare, M. Khorasani, K. Hemmesi, H. Mirzadeh, H. Azizi, B. Sadatnia, M. Hatami, S. Kiani, J. Barzin, H. Baharvand, Differentiation of Embryonic Stem Cells into Neural Cells on 3D Poly (D, L-lactic acid) Scaffolds versus 2D Cultures, International Journal of Artifical Organs, 2011,1012-1023.


29) M. Esmaeili, S. S. Madaeni, J. Barzin, N. Yousefimehr, Effect of silver ions coordination on morphology and performance of PES/PVP composite membrane in facilitated transport of ethylene, Separation and Purification Technology ,2011, 371– 383.

 

30) H. Pazokian, A. Selimis, J. Barzin, S. Jelvani, M. Mollabashi, C. Fotakis, E. Stratakis, Tailoring the wetting properties of polymers from highly hydrophilic to superhydrophobic using UV laser pulses, Journal of Micromechanics and Microengineering, 2012, 22.


31) S. Salehi Shahrabi, H. R. Mortaheb, J. Barzin, M. R. Ehsani, Pervaporative performance of a PDMS / blended PES composite membrane for removal of toluene from water, Desalination ,2012, 287, 281–289.


32) A. Soroush, J. Barzin, M. Barikani, M. Fathizadeh, Interfacially polymerized polyamide thin film composite membranes: Preparation characterization and performance evaluation, Desalination, 2012,287, 310–316.


33) H. Pazokian, J. Barzin, M. Mollabashi, S. Jelvani, S. Abolhosseini, Exploring the Influence of a XeCl Laser Treatment on Biocompatibility of Polyethersulfone Film, Laser Physics, 2012,22,5, 922–929.


34) B. Gholizadeh, A. Arefazar, J. Barzin, Morphology and gaz permeability of polymeric membrane by PC / PA6 / Nanoclay ternary nanocomposite, Polymers and polymer Composites, 2012, 271–278.


35) M. Massumi, M. Abasi, H. Babaloo, P. Terraf, M. Safi, M. Saeed, J. Barzin, M. Zandi, M. Soleimani, The Effect of Topography on Differentiation Fates of Matrigel – Coated Mouse Embryonic Stem Cells Cultured on PLGA Nanofibrous Scaffolds, Tissue Engineering Part A, 2012, 18, 609–620.

 

36) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A. Zarghan, Adsorption of copper and nickel ions on macroporous chitosan membrane: Equilibrium study, Applied Surface Science, 2012, 258, 7732–7743.


37) H. Pazokian, M. Mollabashi, A. Selimis, E. Stratakis, J. Barzin, S. Jelvani, Effect of pulse duration on KrF laser treatment of a polyether sulfone film: cell culture study, Applied Physics A, Material science and processing, 2013, 110, 633-637.

 

38) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, Laser Surface Modification of Polyethersulfone Films: Effect of Laser Wavelength on BiocompatibilityJournal of physics, 2013, 414.

 

39) S. S. Madaeni, M. Esmaeili, S. Attar Nosrati, J. Barzin, Preparation and Characterization of PES and PA Composite Membranes for Air Separation at Low Pressures, Intern. Polymer Processing, 2013, 28, 281–290.

40) M. Esmaeili, S. S. Madaeni, J. Barzin, Morphology and Gas-Permeation Analyses for Poly(ether sulfone) / Poly(vinyl alcohol) Electrolyte Composite Membranes in theFacilitated Transport Process, Journal of Applied Polymer Science, 2013, 129, 1569–1585.


41) M. Esmaeili, S. S. Madaeni, J. Barzin, The Effect of Carrier Salts Blending on the Morphology, Stability and Permeation Properties of PES/PEO Facilitated Transport Membranes, Separation and Purification Technology, 2013, 103, 289–305.


42) A. Mota, A. Sahebghadam Lotfi, J. Barzin, M. Massumi, M. Hatam, B. Adibi, Study of hBMSC Adhesion and Proliferation on RGD-modified Polycaprolactone/Gelatin Nanofibrous Scaffold, Modares Journal of Medical Sciences: Pathobiology, 2013, 16, 75-87.


43) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A. F. Ismail, Chitosan/Polyethersulfone composite nanofiltration membrane for industrial wastewater treatment, Int.J.Nanosci.Nanotechnol, 2013, 9, 213-220.

 

44) M. Naeimi, A. Karkhaneh, J. Barzin, M. T. Khorasani, A. Ghaffarieh, Novel PDMS-based Membranes: Sodium Chloride and Glucose Permeability, Journal of Applied Polymer Science, 2013, 127, 3940-3947.

 

45) H. Pazokian, S. Jelvani, M. Mollabashi, J. Barzin, Review of the biocompatibility and blood compatibility properties of polyethersulfone film modified by the excimer and CO2 lasers, Laser Physics, 2014, 24, 066001.


46) M. Amini-Fazl, H. Mobedi, J. Barzin, Incorporation of HSA Microparticles within the Taxol-Loaded In situ Forming PLGA Microspheres: Synthesis, Characterization and Drug Release, International Journal of Polymeric Materials and Polymeric Biomaterials, 2014, 63, 632-640.

 

47) M. Mortazavi, H.R. Mortaheb, J. Barzin Separation of thiophene from thiophene/n-heptane mixture by using composite membranes with active layer of PVP/PEG on PES support membrane, Journal of Applied Research in Chemistry (JARC),2014, 14.

 

48) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, S. Abolhoseini, Formation of different microstructures on a polyethersulfone film following XeCl laser irradiation, Iranian Journal of Physics Research (IJPR), 2014, 14.

 

49) M. Amini-Fazl, H. Mobedi, J. Barzin, Investigation of aqueous stability of taxol in different release media, Drug Development and Industrial Pharmacy, 2014, 40, 519–526.

 

50) Ranjbarzadeh-Dibazar, A., Shokrollahi, P., Barzin, J., Rahimi, A., Lubricant facilitated thermo-mechanical stretching of PTFE and morphology of the resulting membranes, Journal of Membrane Science, 2014, 470, 458-469.

 

51) Ghanian, M. H., Barzin, J., Zandi, M.Ehsani .M, KazemiAshtiani, M., Controlling the orientation of electrospun nanofibes by conductive-insulating hybrid collectors, Basparesh Journal( Persian Language), 2014, 4,2, 51-58.

 

52) Mota, A., Lotfi, A. S., Barzin, J., Hatam, M., Adibi, B., Khalaj, Z., Massumi, M., Human bone marrow mesenchymal stem cell behaviors on PCL/gelatin nanofibrous scaffolds modified with a collagen IV-derived RGD-containing peptide, Cell Journal (Yakhteh), 2014, 16, 1.

 

53) Saeed, M., Mirzadeh, H., Zandi, M., Irani, S., Barzin, J., Rationalization of specific structure formation in electrospinning process: Study on nanofibrous PCLand PLGAbased scaffolds, Journal of Biomedical Materials Research Part A, 2015, 103, 3927-3939.

 

54) Jafarinasab, M., Barzin, J., Mortaheb, H. R., Mobedi, H., Structure and performance characterization of PDMS/PES-based pervaporation membranes for ethanol/water separation, Iranian Polymer Journal, 2015, 24, 989-1002.

 

55) S. khezli, M. Zandi, J. Barzin, A review on Poly (ether-sulfone) electrospun nanofibers for membrane separation process, Basparesh Journal (Persian Language), 2015, 4, 4-15.

 

56) Ghanian, M. H., Farzaneh, Z., Barzin, J., Zandi, M., KazemiAshtiani, M., Alikhani, M., Baharvand, H., Nanotopographical control of human embryonic stem cell differentiation into definitive endoderm, Journal of Biomedical Materials Research Part A, 2015, 103, 3539-3553.

 

57) JafariNodoushan, M., Barzin, J., Mobedi, H., Size and morphology controlling of PLGA microparticles produced by electro hydrodynamic atomization, Polymers for Advanced Technologies, 2015, 26, 502-513.

 

58) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin,S. Abolhoseini , XeCl laser treatment of polyethersulfone membrane in the air and water, Iranian Journal of Physics Research (IJPR), 2015,594.

 

59) S. Khezli, M. Zandi, J. Barzin, Fabrication of electrospun nanocomposite polyethersulfone membrane for microfiltration, Polymer Bulletin, 2016, 73, 2265–2286.

 

60) Ghaee, A., Shariaty-Niassar, M., Barzin, J., Matsuura, T., Fauzi Ismail, A., Preparation of chitosan/cellulose acetate composite nanofiltration membrane for wastewater treatment, Desalination and Water Treatment, 2016, 57, 14453-14460.

 

61) Taghavi, S., Mohammadi, F., Barzin, J., Ionic Polymer-Metal Composites (IPMC) from recycled Flemion® membrane used in chlor-alkali industry, Scientia Iranica. Transaction C, Chemistry, Chemical Engineering, 2016, 23(3), 1117.

 

62) M. Kazemi Ashtiani, M. Zandi, J. Barzin, Y. Tahamtani, M. Hossein Ghanian, A. Moradmand, M. Ehsani, Substrate-mediated commitment of human embryonic stem cells for hepati differentiation, Journal of Biomedical Materials Research Part A, 2016,104A,2861-2872.

 

63) Vahedi M., Barzin J., Kowsari M., Fabrication of polyethersulfone-Based symmetric Membrane by Applying pause stage in coagulation, Iran. J. Polym. Sci. Technol, 2016, 28(5), 421-436,.

 

64) Pazokian, H., Mehrabadi, A. H., Barzin, J., Mollabashi, M., Controlling the porosity of a polyethersulfone membrane surface with an XeCl laser, Laser Physics, 2016, 26(3).

 

65) Jafari-Nodoushan, M., Barzin, J., Mobedi, H., A stability-indicating HPLC method for simultaneous determination of morphine and naltrexone, Journal of Chromatography B, 2016, 1011, 163-170.

 

66) Faramarzi, A. R., Barzin, J., Mobedi, H., Effect of solution and apparatus parameters on the morphology and size of electrosprayed PLGA microparticles, Fibers and Polymers, 2016, 17(11), 1806-1819.

 

67) Khorsand-Ghayeni, M., Barzin, J., Zandi, M., Kowsari, M., Fabrication of asymmetric and symmetric membranes based on PES/PEG/DMAc, Polymer Bulletin, 2017, 74(6), 2081-2097.

 

68) L. Mohammadi Amirabad, M. Massumi, M. Shamsara, I. Shabani, A. Amari, M. Mossahebi Mohammadi, S.Hosseinzadeh, S. Vakilian, S. K. Steinbach, M. R. Khorramizadeh, M. Soleimani, J. Barzin, Enhanced Cardiac Differentiation of Human Cardiovascular Disease Patient-Specific Induced Pluripotent Stem Cells by Applying Unidirectional Electrical Pulses Using Aligned Electroactive Nanofibrous Scaffolds, ACS Appl. Mater. Interfaces, 2017, 9, 6849-6864.

 

69) Saeed, S. M., Mirzadeh, H., Zandi, M., Barzin, J., Designing and fabrication of curcumin loaded PCL/PVA multi-layer nanofibrous electrospun structures as active wound dressing, Progress in biomaterials, 2017, 6(1-2), 39-48.

 

70) Faramarzi, A. R., Barzin, J., Mobedi, H., Producing PLGA fine particles containing high magnetite nanoparticles by using the electrospray technique, Journal of Polymer Research, 2017, 24(1), 13.

 

71) Alavijeh, R. Z., Shokrollahi, P., Barzin, J., A thermally and water activated shape memory gelatin physical hydrogel, with a gel point above the physiological temperature, for biomedical applications, Journal of Materials Chemistry B, 2017, 5(12), 2302-2314.

 

72) Alavijeh, R. Z., Shokrollahi, P., Barzin, J. (2017). A thermally and water activated shape memory gelatin physical hydrogel, with a gel point above the physiological temperature, for biomedical applications. Journal of Materials Chemistry B, 5(12), 2302-2314.

 

73) Ranjbarzadeh-Dibazar, A., Barzin, J., Shokrollahi, P., Microstructure crystalline domains disorder critically controls formation of nano-porous/long fibrillar morphology of ePTFE membranes, Polymer, 2017, 121, 75-87.

 

74) Shahrabi, S. S., Mortaheb, H. R., Barzin, J., Ehsani, M. R., Nanoporous Polyether Sulfone Membrane, Preparation and Characterization: Effect of Porosity and Mean Pore Size on Performance, Journal of Membrane and Separation Technology, 2017, 6(2), 71-84.

 

75) Y. Hamedani,N. Fazeli,J. Barzin,  Production and Characterization of Gelatin Based Electro-spun Nano-fibres as Burn Wound Dressings, Iranian Journal of Chemical Engineering (IJCHE), 2017, 14, 3.

 

76) A. R. Faramarzi , J. Barzin, H. Mobedi, Iron Oxide Loaded PLGA Particles for Contrast Enhancement in Magnetic Resonance Imaging (MRI), Global Journal of Pharmacy & pharmaceutical Science, 2017,2.

 

77) S. E. Maleki, P. Shokrollahi, J. Barzin, Impact of supramolecular interactions on swelling and release behavior of UPy functionalized HEMAbased hydrogels, Polymers for Advanced Technologies, 2018.

 

78) Shahrabi, S. S., Barzin, J., Shokrollahi, P., Blood cell separation by novel PET/PVP blend electrospun membranes, Polymer Testing, 2018, 66, 94-104.

 

79) Vahedi, M., Barzin, J., Shokrolahi, F., Shokrollahi, P., SelfHealing, Injectable Gelatin Hydrogels CrossLinked by Dynamic Schiff Base Linkages Support Cell Adhesion and Sustained Release of Antibacterial Drugs, Macromolecular Materials and Engineering, 2018, 1800200.

 

80) Barzin, J., Safarpour, M., Kordkatooli, Z., Vahedi, M., Improved microfiltration and bacteria removal performance of polyethersulfone membranes prepared by modified vaporinduced phase separation, Polymers for Advanced Technologies, 2018,1-20

 

81) M. A. Aroon, H. Beheshti, J. Barzin, M. Shariaty-Niassar, Purified and Functionalized MWCNTs: Application in CO2/CH4 Separation Using Mixed Matrix Membranes, International Journal of Nanoscience & Nanotechnology, 2018, 14, 251.

 

82) S. Salehi Shahrabi, J. Barzin, P. Shokrollahi, Statistical approach to estimate fiber diameter of PET/PVP blend electrospun using Taguchi method and fitting regression model, Materials Research Express, 2019,6.

 

83) M. Safarpour, J. Barzin, A. Khataee, and Z. Kordkatooli, Twostage phase separation of cellulose acetate membranes modified with plasmatreated natural zeolite: Response surface modeling, Polymers for Advanced Technologies, 2019.

 

84) S. Karimi, A. Ghaee, J. Barzin, Preparation and characterization of a piezoelectric poly (vinylidene fluoride)/nanohydroxyapatite scaffold capable of naproxen delivery, European Polymer Journal, 2019, 112, 442-451.

 

85) R. Dehghan and J. BarzinDevelopment of a polysulfone membrane with explicit characteristics for separation of low density lipoprotein from blood plasmaPolymer Testing, 2020, 85, 106438.

 

86) M. Vahedi, F. Shokrolahi,  J. Barzin, P. Shokrollahi,L. Taghiyar,M. Kazemi Ashtiani, Amylopectin Multiple Aldehyde Crosslinked Hydrogel as an Injectable and Self-Healing Cell Carrier for Bone Tissue Engineering , Macromolecular Materials and Engineering, 2020,305,4.

 

87) M. Zakeri,H. Mobedi,J. Barzin,A. Jamshidi,A. Mashak, Development of chitosan beads for controlled release of dexamethasone prepared by co-axial needle method, Journal of Polymer Research, 2020, 27, 254.

 

88) M. Moghiseh, M. Safarpour, J. Barzin, Cellulose acetate membranes fabricated by a combined vapor-induced/wet phase separation method: morphology and performance evaluation, Iranian Polymer Journal, 2020, 29, 1026.

 

89) S. Hasheminasab, J. Barzin, R. Dehghan., High-Performance Hemodialysis Membrane: Influence of Polyethylene Glycol ans Polyvinylpyrrolidone in the Polyethersulfone Membrane, Journal of Membrane Science and Research, 2020, 6, 438.

 

90) Mahdi Saeed,Hamid Mirzadeh,Mojgan Zandi, Jalal Barzin , PEGylated curcuminloaded nanofibrous mats with controlled burst release through bead knotonspring design, Progress in Biomaterials, 2020, 9, 175.

 

91) F. Haghdoost,S. Hajir Bahrami,J. Barzin,A. Ghaee,  Preparation and characterization of electrospun polyethersulfone/polyvinylpyrrolidone-zeolite core–shell composite nanofibers for creatinine adsorption, Separation and Purification Technology, 2021, 257,117881.

 

92)  R.Dehghan, J.Barzin,   Low density lipoprotein (LDL) apheresis from blood plasma via anti-biofouling tuned membrane incorporated with grapheme oxide- modified carrageenan, Journal of Membrane Science, 2021, 620, 118878.

 

93)  R.Dehghan, J.Barzin,   High cut‑off membrane: evaluation of pore collapse and the synergistic effect of low and high molecular weight polyvinylpyrrolidone, Journal of Polymer Research, 2021, 28.

 

94)  R.Dehghan, J.Barzin,   Membrane patterning through horizontally aligned microchannels developed by sulfated chopped carbon fiber for facile permeability of blood plasma components in low-density lipoprotein apheresis, Separation and Purification Technology, 2022, 278.

 

95) M. Mohseni, P. Shokrollahi and J.Barzin, Impact of supramolecular interactions on delivery of dexamethasone from a physical network of gelatin/ZnHAp composite scaffold, International Journal of Pharmaceutics, 2022, 615.

 

96)  R.Dehghan, J.Barzin, H.Abtahian, B Darabi, H.R. Ghaderi, PES membranes for Low density lipoprotein (LDL) apheresis from blood,  Research and Development of Polymer Technology Journal ( Persian language) , 2022, 7,1, 53-63.

 

97) A.Afroozan M.Akbari and J.Barzin, Development of an injectable self‑healing hydrogel based on N‑succinyl chitosan/ oxidized pectin for biomedical applications, Journal of Polymer Research, 2022, 29,165.

 

98) F. Haghdoost, M. Razbin, H. Bahrami, J.Barzin and A. Ghaee  Modeling and optimization of the core-shell nanofibrous composite mat as a scaffold via hybrid models, Industrial Textiles, 2022, 52, 1-28.

 

99)  R.Dehghan, J.Barzin, H.Abtahian, B Darabi, H.R. Ghaderi, Study on blood coagulation on biopolymers and an overview of the methods of measuring compatibility, Research and Development of Polymer Technology Journal ( Persian language) , 2023, 7,4,5-16.

100) F. Haghdoost,H. Bahrami, J.Barzin  and A. Ghaee  Development of biocompatible co-electrospun polyethersulfone/polyvinylpyrrolidone-Y zeolite hybrid nanofiber, International Journal of Polymeric Materials and Polymeric Biomaterials, 2023, 72,18,1546-1557.

 

E. Conference Papers:

 

1) J. Barzin., S. S. Madaeni, H. Mirzadeh., Effect of Polyvinylpyrrolidone (PVP) on Hemodialysis Performance of Flat membranes Prepared from Polyether Sulfone (PES), 7th Iranian Chemical Engineering Congress (IChEC 2002), October 27-29, Tehran University, Tehran, Iran.


2) J. Barzin., C. Feng, K. C. Khulbe, T. Matsuura, S. S. Madaeni, H. Mirzadeh, Characterization of polyethersulfone hemodialysis membrane by ultrafiltration and atomic force microscopy,
5th International Membrane science and Technology Conference (IMSTEC 2003) November 10-14, Sydney, Australia.


3) J. Barzin., S. S. Madaeni, H. Mirzadeh, Effect of Preparation Conditions on Morphology and Performance of Hemodialysis Membranes Prepared from Polyether Sulfone (PES) and Polyvinylpyrrolidone (PVP), Euromembrane 2004, September 27- October 1, Hamburg, Germany.


4) J. Barzin., S. S. Madaeni., H. Mirzadeh. Effect of Polyvinylpyrrolidone (PVP) on Support layer Morphology of Flat membranes Prepared from Polyether Sulfone (PES), 9th Iranian Chemical Engineering Congress (IChEC 2004), 23 November, Tehran, Iran.

 

5) S. S. Madaeni., A. Rahimpour., J. Barzin, Effect of acetone on morphology and performance of polysulfone ultrafiltration membranes for milk concentration, 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.


6) J. Barzin., S. S. Madaeni., H. Mirzadeh. Effect of Polyvinylpyrrolidone (PVP) on Support layer Morphology of Flat membranes Prepared from Polyether Sulfone (PES), 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.


7) S. S. Madaeni., A. Rahimpour., J. Barzin., Preparartion of Polysulfone Ultrafiltration Membranes for Milk Concentration: Effect of acetone on morphology and performance of polysulfone ultrafiltration membranes for milk oncentration, 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.


8) J. Barzin., H. Mirzadeh., S. S. Madaeni., T. Matsuura., Hollow Fiber Hemodialysis Membranes Prepared from Polyethersulfone and Polyvinylpyrrolidone, Engineering with Membranes, Medical & Biological Application, (EWM 2005), May 15-18, Cambogli-Portofino, Italy.


9) J. Barzin., S. S. Madaeni., H. Mirzadeh., T. Matsuura., C. Feng, K.C. Khulbe, Heat treated polyethersulfone-polyvinylpyrrolidone hollow fiber membrane for hemodialysis application, International Congress on Membrane and Membrane Processes 2005 (ICOM 2005) August 21-26, 2005, Seoul, Korea.


10) J. Barzin., H. Mirzadeh., S. S. Madaeni., T. Matsuura., Hollow fiber Membranes Prepared from Polyether Sulfone and Polyvinylpyrrolidone for Hemodialysis Application, 5th IBERO American Congress on Membrane Science and Technology (CITEM 2005), July 6-8, 2005, Valencia, Spain.


11) J. Barzin., S. S. Madaeni, H. Mirzadeh., T. Matsuura., Polyether Sulfone/Poly( vinyl pyrrolidone) Hollow Fiber Membranesfor Hemodialysis Application, The 4th International Seminar on Polymer Science and Technology (ISPST2005), September 27-29, 2005, Tehran, Iran, (Ranked between the first 5 excellent papers of more than 400 oral and poster papers).


12) S. S. Madaeni, A. Rahimpour, J. Barzin, Effect of Formamide on Morphology and Performance of Polysulfone Ultrafiltration Membranes for Milk Concentration. The 4th International Seminar on Polymer Science and Technology (ISPST2005), September 27-29, 2005, Tehran, Iran.


13) J. Barzin, H. Mirzadeh, S.S. Madaeni, T. Matsuura., Preparation and Modification of Polyethersulfone – Polyvinyl pyrrolidone Hollow Fiber Membranes for Hemodialysis, 10th Iranian Chemical Engineering Congress (IChEC 2005), November 15-17, Zahedan, Iran.


14) J. Barzin, S.S. Madaeni and S. Poormoghadasi., Fabrication of Polyvinyl alcohol and Polyether sulfone hemodialysis membranes and comparison of their performance and morphological characteristics, Advance Membrane Technology, June 11-6, 2006, Cetraro Italy.


15) S. S. Madaeni, M. Esmaeili, J. Barzin., Manufacturing polyamide composite membranes via interfacial polymerization for air separation at low pressures, 11th Iranian Chemical Engineering Congress (IChEC 2006), November 28-30, Tehran, Iran.


16) J. Barzin, B. Sadatnia, H. Mirzadeh., Correlation between theoretical phase diagram and membrane morphology for water/solvent/polyethersulfone systems, The 8th International Seminar on Polymer Science and Technology, (ISPST2007), Oct 23-25, Sharif University, Tehran, Iran.


17) J. Barzin, S. S Madaeni, M. Esmaeili1, Preparation of PES composite membrane using some glassy polymers active layer for air separation, The 8th International Seminar on Polymer Science and Technology (ISPST2007), Oct 23-25, Sharif University, Tehran, Iran.


18) S. S. Madaeni, M. Esmaeili, J. Barzin, Applying some kinds of glassy polymers as active layer of composite membranes for air separation, The 4th International Seminar on Polymer Science and Technology (ISPST2007), Oct 23-25, Sharif University, Tehran, Iran.


19) J. Barzin., H. Mirzadeh, S. S. Madaeni, T. Matsuura, Modification of Hemodialysis Hollow Fiber Membrane Prepared from PolyetherSulfone and Polyvinyl Pyrrolidone, 6th International Membrane science and Technology Conference (IMSTEC 2007) November 5-9, Sydney, Australia.

 

20) A. Mota, A. S. Lotfi, J. Barzin, M. Maasumi, M. Hatam, B. Adibi, Z. Khalaj, RGD Modified PCL/Gelatin Hybrid Nanofiber for Potential Applications in Tissue Engineering, 8th Royan International Congress on Stem Cell Biology & Technology, 5-7 September 2007, Tehran, Iran.

 

21) A. Abarghooee., J. Barzin., A. Jamshidi, M.T. Khorasani, Surface Modification of PES Hemodialysis Membrane for Reduction of Protein Fouling and Platelet Adhesion by Plasma, 14th Iranian conference on biomedical engineering (ICBME 2008), Feb 13-14, Shahed University, Tehran, Iran.


22) M. Esmaeili1., S. S. Madaeni., J. Barzin., Effects of glassy polymers as active layer of polyethersulphone membranes for optimisation of air separation process at low pressures, 13th Iranian Chemical Engineering Congress (IChEC 2008), October 2-23, Tabriz, Iran.


23) B. H. Gholizadeh., A. Arefazar, J. Barzin, Morphology and gas permeability of polymeric membrane by PC/PA6/ternary nanocomposite, 7th international conference on ,embrane science and technology (MST 2009), May 13-15, Kuala lumpur, Malaysia.


24) A. Ghaee., M. Shariaty- Niasar., J. Barzin., The effect of chitosan membrane preparation parameters on removal of copper ions, 7th international conference on membrane science and technology (MST 2009), May 13-15, Kuala lumpur, Malaysia.


25) B. Sadatnia, J. Barzin, Thermodynamic evaluation of quaternary membrane-forming system of water/NMP/PES/PV, The 9th International Seminar on Polymer Science and Technology (ISPST 2009).


26) M. Esmaeili1., J. Barzin., S.S. Madaeni., Evaluation the structural changes of PVP composite membranes as a function of salt addition for facilitated transport process, The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Oct 17-21, Tehran, Iran.


27) H. Pazppkian, J. Barzin, M. Mollabashi, S. Jelvani, Z. Zamanipour, ArF Laser Treatment of Polyethersulfone Films, The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Oct 17-21, Tehran, Iran.


28) A. Ghaee., M. Shariaty-Niasar., J.Barzin, Chitosan membrane performance, prepared by immersion-precipitation method, The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Oct 17-21, Tehran, Iran.


29) A. Abarghooee, J. Barzin, A. Jamshidi, T. Khorasani, Biocompatibility study of CO2 plasma treated PES membranes, The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Oct 17-21, Tehran, Iran.


30) A. Soroush, J. Barzin, M. Barikani, Investigation the structural variation of interfacially polymerized thin film composite membranes, The 9th International Seminar on Polymer Science and Technology (ISPST 2009), Oct 17-21, Tehran, Iran.


31) H. Farokhzad, A. Poorkhalil, J. Barzin, A. Mashak, H. Mobedi, The study of GPC conditions on molecular weight determination of poly (lactide-co-glycolide) 9th International Seminar on Polymer Science and Technology (ISPST 2009), Oct 17-21, Tehran, Iran.


32) J. Barzin, S. S. Madaeni, S. Poormoghadasi, Effect of polyethylene glycol on morphology and performance of Polyvinyl Alcohol hemodialysis Membranes, Euromembrane 2009, 6-10 September, Montpellier, France.


33) M. Esmaeili., J. Barzin., S.S. Madaeni., Morphological Analysis of PVP Composite Membranes for Facilitated Transport Process, 6th Internatinal Chemical Engineering Congress & Exhibition, (IChEC 2009), Nov 16-20, Kish Island, Iran.


34) A. Ghaee., M. Shariaty- Niasar, J. Barzin., The influence of membrane preparation parameters on chitosan membrane morphology, 6th International Chemical Engineering Congress (IChEC 2009), Nov 16-20, Kish Island, Iran.


35) M. Esmaeili, S. S. Madaeni, J. Barzin, N. Yousefimehr, Preparation and investigation of defect free PES/PVP composite membranes for ethylene recover process, Iran Membrane, 15-16 February 2011, Tehran, Iran.


36) S. Mokhtari, sh. Baghapoor, P. Parvin, A. Amkadi, J. Barzin, The effect of incoherent ultraviolet light on the renal capsule tissue using danamic mechanical analysis and FTIR sperctroscopy, Iran Lyzer Congress,2011


37) M. Esmaeili., S. S. Madaeni, J. Barzin, N. Yousefimehr, Evaluation of morphology and performance pf PES/PVP composite membrane for ethylene recovery process, 2th national convention on Fule, Energy and Environment (2010), May, 19-20, Kermanshah, Iran.


38) P. Terraf, M. Safi, J. Barzin, M. Masumi, Do matrigel – embedded transgenic mouse embryonic Es cells cultured on electro spun PLGA – PCL scaffolds Efficiently differentiate to dopaminergic neurons?, 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.


39) M. Massuni., P. Tarraf., H. Babaloo., M. Safi., M. Abasi., A. Divsalar., M. Saeed., J. Barzin., Combined influences of matrigel and electrospun PLGA nanofibrous scaffolds on differentiation of plutipotent mouse embryonic stem cells, 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center. Toronto, Ontario Canada.


40) F. Alipour, J. Barzin, S. Moradi, Effect of coagulation bath temperature on morphology and performance of PES – Aerosil nano particle ultrafiltration membranes, Asia/Australia Regional Meeting (PPS 2011), Kish Island, Iran. P–6-54.


41) F. Alipour, J. Barzin, S. Moradi, Effect of Delay time on morphology and performance of PES ultrafiltration membrane prepared by PES/SiO2/DMAC, Asia/Australia Regional Meeting (PPS 2011), Kish Island, Iran. P–6-55.


42) H. Babaloo, M. Abasi, Gh. Riazi, J. Barzin, M. Massumi, Can beta – boswellic acid synergize derivation of dopaminergic neuron from mouse embryonic Es cells cultured on matrigel coated electro spun PLAGA/PLC nanofibrous scaffold, 9th Annual Meeting International Society for Stern Cell Research (2011), June 15-18, Metro Toronto Convention Center, Toronto, Ontario Canada.


43) A. Haghighat Mesbahi, E. Khakrah, S. Nouri Khorasani, J. Barzin, H. Mobedi, Investigating Expert system parameters on modeling performance of release behavior form an injectable in situ forming Drug Delivery system, Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.

 

44) A. Haghighat Mesbahi, D. Semnani, J. Barzin, H. Mobedi, Investigating Expert system parameters on modeling performance of in situ forming controlled Drug Delivery system, Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.

 

45) A. Haghighat Mesbahi, S. Nouri Khorasani, J. Barzin, H. Mobedi, D. Semnani, Performance prediction of in situ forming controlled drug delivery system by Adaptive Neuro-Fuzzy Inference System (ANFIS), Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.

 

46) M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, H. Baharvand, M. Kazemi-Ashtiani, Optimizing topographical features of electrospun nanofibers for efficient endodermal differentiation of human induced pluripotent stem cells, 10th Annual Meeting International Society for Stem Cell Research (ISSCR), June 13-16, Japan, Yokohama, PACIFICO Yokohama.


47) M. H. Ghanian., M. Zandi., J. Barzin., M. Ehsani., M. Kazemi-Ashtiani, H. Baharvand, Reducing Diameter and Variability of Electrospun Poly ( -Caprolactone) Nanofibers Using Charged Additives, 14th Iranian National Chemical Engineering Congress (IChEC 2012), Oct 16-18, Tehran, Iran.


48) M. Jafarinasab., J. Barzin., H. Mobedi., H. Mortaheb., GH. Salehi Jouzani., S. Abbasalizadeh, Effect of Surface Roughness on the Pervaporative Performance of PDMS/PES Composite Membranes for Ethanol/Water Separation, 14th Iranian National Chemical Engineering Congress (IChEC 2012), Oct 16-18, Tehran, Iran.


49) P. Jafari, M. Keshavarz Moraveji, J. Barzin, Gh. Salehi Jouzani, S. Abbasalizadeh
, Simulation of the Composite Pervaporation Membrane Performance in the Separation of Ethanol from Water by Computational Fluid Dynamics (CFD), 14th Iranian National Chemical Engineering Congress (ICHEC 2012), Oct 16-18 Tehran, Iran.


50) P. Jafari, M. Keshavarz Moraveji, J. Barzin, Gh. Salehi Jouzani, S. Abbasalizadeh, Application of Response Surface Method (RSM) in the Optimization of the Composite Pervaporation Membrane Performance in the Separation of Ethanol from Water, 14th Iranian National Chemical Engineering Congress (ICHEC 2012), Oct 16-18 Tehran, Iran.


51) M. H. Ghanian., J. Barzin., M. Zandi., M. Ehsani., M. Kazemi-Ashtiani., H. Baharvand, Fabrication of Uniform Electrospun Poly (ε-caprolactone) Microfibers Using Cationic Surfactant, The 10th International Seminar on Amirkabir University of Technology (ISPST 2012), Oct 21-25, Tehran, Iran.


52) M. Kazemi-Ashtiani., M. Zandi., J. Barzin., M. H. Ghanian., H. Baharvand., Surface Functionalization and Characterization of Electrospun Polycaprolactone Nanofibers for Biomedical Application, The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.


53) M. Jafari-Nodoushan., H. Mobedi., J. Barzin., Monitoring the Effect of Flow rate on Size and Morphology of Microspheres Produced by the Means of Electrospraying Method, The 10th International Seminar on Amirkabir University of Technology (ISPST 2012), Oct 21-25, Tehran, Iran.


54) M. Jafari-Nodoushan., T. Ebrahimi., J. Barzin., H. Mobedi., Evaluation of Naltroxone Release Kinetic from In Situ-Forming Drug Delivery System (Investigation the Effect of Polymer End Group Functionality) The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.


55) M. Jafari-Nodoushan., T. Ebrahimi., H. Mobedi, J. Barzin, Effect of Polymer Blending on Morphology and Initial Burt Release of an in Situ-Forming Drug Delivery System, The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.


56) S. Taghavi., F. Mohammadi, J. Barzin, Ionic Polymer-metal composites (IPMC) from a recycled Flemion membrane, The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.


57) M. Jafari-Nodoushan., J. Barzin., H. Mobedi., H. Mortaheb., GH. SalehiJouzani., S. Abbasalizadeh., Effect of PDMS viscosity on the Pervaporative Performance of PDMS/PES composite membranes for ethanol/water separation, The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.


58) M. S. Amini-Fazl., H. Mobedi, J. Barzin, Controlled Release of Paclitaxel from In situ-Forming PLGA Gel, The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.


59) P. Jafari., J. Barzin., Gh. Salehi Jouzani., M. Keshavarz Moraveji, S. Abbasalizadeh, Optimization of PDMS/blended PES Composite Membrane Performance by Response Surface Methodology, The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.


60) P. Jafari., M. Keshavarz Moraveji., Gh. Salehi Jouzani., J. Barzin, S. Abbasalizadeh, Pervaporative Separation of Ethanol/Water Mixture Using PDMS/blended PES Composite Membrane: CFD Simulation, The 10th International Seminar on Amirkabir University of Technology (ISPST2012), Oct 21-25, Tehran, Iran.

 

61) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, KrF and XeCl Laser Induced Ripples on a Polyethersulfone Film, XIX International Symposium on High-Power Laser Systems and Applications 2012 ISTANBUL.

 

62) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A. Fauzi Ismail, Chitosan/Polyethersolfone Composite Nanofiltration Membrane for Removal Heavy Metal from Wastewater, The 11th International Conference on Membrane Science & Technology, Kuala Lampur, Malaysia, 27-29 Aug, 2013.

 

63) A. Ghaee, M. Shariaty-Niassar, J. Barzin, T. Matsuura, A. Fauzi Ismail, Synthesis and Application of Chitosan/Cellulose Acetate Coposite Membranes for Copper Ions Removal from Wastewater, The 11th International Conference on Membrane Science & Technology, Kuala Lampur, Malaysia, 27-29 Aug, 2013.

 

64) Sh. Tohidi, J. Barzin, A. Ghaee, Preparation and evaluations of electrospun poly (lactic-co-glycolic acid)/Chitosan composite nanofibrous for wound dressing applications, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

65) K. Khadem, J. Barzin, H. Pazokian, M. Mollabashi, K. Silakhor, Surface modification of polyethersulfone membrane by ArF lase fohydrophilicity improvement, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

66) M. Vahedi, J. Barzin, Effect of Temperature and Solvent Evaporation Delay Time on the Structure of PES Flat Sheet Membrane, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

67) R. sadat Eshraghi Naeeni, G. Amoabediny, A. Ghaee, J. Barzin, Effect of polyethylene glycol concentration as an additive on performance of polyether sulfone dialysis membranes, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

68) M. Jafarinasab, J. Barzin, H. Mobedi, H. Mortaheb, G. Salehi Jouzani, S. abbasalizadeh, Effect of Surface Nodular Structure on the PDMS/PES based Membranes Pervaporative Performances in Ethanol / Water Separation, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

69) B. Sadatnia, F. Mohammadi, J. Barzin, Preparation and characterization of PPO/ZIF-8mixed matrix membranes for propylene/propane separations, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

70) S. khezli, M. Zandi, J. Barzin, Effect of solvent system and environmental conditions on the electro spinning of Poly(ether-sulfone), 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

71) Y. Hamedani, N. Fazeli, J. Barzin, Investigation of Electro-spun PLGA/Lidocaine fibers, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

72) Y. Hamedani, J. Barzin, N. Fazeli, Investigation of drug release in sandwich structured PLGA-Lidocain/Gelatin-SSD/PLGA electro-spun fibers, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

73) A. Ranjbarzadeh Dibazar, P. Shokrollahi, A. Rahimi, J. Barzin, An investigation on Shrinkability of ePTFE Membrane Through Uniaxial Stretching, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute (IPPI).

 

74) M. Jafari-Nodoushan, J. Barzin, H. Mobedi, Microsphere Embedded Matrix: a New Method for Drug Co-Therapy, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

75) M. Khorsand, J. Barzin, M. Zand, Achieve to Asymmetric Polyethersulfone (PES) Membrane by Combined Phase Separation Method, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute (IPPI).

 

76) A. Hashemipanah, H. Pazokian, M. Mollabashi, J. Barzin, A. Tabatabaei, XeCl Laser Irradiation of PES/PVP Membranes, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

77) K Khadem, H. Pazokian, J. Barzin, M. Mollabashi, A. Tabatabaei, Study of surface and volume porosity of PES membranes with ArF Laser treatment, 3rd Confrance on Lasers and their applications, 3-4 September (2014), Tehran, Iran.

 

78) A. Hashemipanah, H. Pazokian, M. Mollabashi, J. Barzin, A. Tabatabaei, K Khadem, Effect of XeCl Laser on surface chemical structure of PES base Membranes, 3rd Confrance on Lasers and their applications, 3-4 September (2014), Tehran, Iran.

 

79) K Khadem, J. Barzin, M. Mollabashi, H. Pazokian, K. Silakhory, Effect of ArF laser on hydrophilisity of PES membranes, 3rd Confrance on Lasers and their applications, 3-4 September (2014), Tehran, Iran.

 

80) F. Banihashemi, H. Mobedi, J. Barzin, Investigation of effect of various drug loading and addition of a rate modifying agent on famotidine release from in situ forming implants, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).

 

81) M. Jafari-Nodoushan, H. Mobedi, J. Barzin‎, Electrospraying: A Tuneable Method of Microparticle Production, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014 ‎

 

82) M. Jafari-Nodoushan, J. Barzin, H. Mobedi, Design of a Combined Morphine Delivery System (Morphine Microsphere- ‎Embedded In-Situ Forming), The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014.

 

83) M. S. Amini-Fazl, H. Mobedi, J. Barzin, H. Abedini, Incorporation of HAS Microparticles within the Taxol-Loaded In situ Forming PLGA ‎Microspheres: Drug Release, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014.

84) Y. Hamedani, N. Fazeli, J. Barzin, Investigation of Drug Release in Gelation/Silver Sulfadiazine Electro-spun Fibers‎, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014) February 2014.

 

85) M. Jafarinasab, J. Barzin, H. Mobedi, H. R. Mortaheb, G. R. Salehi Jouzani, S. ‎Abbasalizadeh, Design of Support Layers based on PES Membrane to Improve the Permeability ‎Performance, The 8th International Chemical Engineering Congress & Exhibition (IChEC 2014) Kish, Iran, ‎‎24-27 February.

`‎

86) A. Mota, S. Lotfi, J. Barzin, M. Maasumi, M. Hatam, B. Adibi, Fabrication of PCL/Gelatin Hybrid Nanofibrous Scaffold Functionalized with Collagen IV-Derived RGD Peptide, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.

 

87) M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand, Nanofibrous Scaffolds with In Situ Pore Extension Potential, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.

 

88) Sh. Tohidi, A. Ghaee, J. Barzin, Electrospinning and Characterization of Chitosan Nanofibrous for Wound Dressing Application, 22nd Iranian Seminar of Organic Chemistry,19-21 August 2014, Tabriz, Iran.

 

89) M. Vahedi, J. Barzin, Effect of Polymer Concentration and Temperature of Delay Stage on the Structure of PES Membrane, Iran Membrane, 20-21 May 2015, Tehran, Iran.

 

90) A. Ranjbarzadeh, J. Barzin, P. Shokrollahi, Crystal/Morphology Correlation in the PTFE Membranes, Iran Membrane, 20-21 May 2015, Tehran, Iran.

 

91) A. Homavand, M. Moghiseh, J. Barzin, Effect of Solvent Type on Structure of Cellulose Acetate Membranes, Iran Membrane, 20-21 May 2015, Tehran, Iran.

 

92) M. Moghiseh, A. Homavand, J. Barzin, Effect of Cellulose Acetate and Polyvinylpyrrolidone Concentration on Membrane Structures, Iran Membrane, 20-21 May 2015, Tehran, Iran.

 

93) Sh. Tohidi, A. Ghaee, J. Barzin, Evaluations Effect of Concentration and Electrospinning Parameters on Electrospun Poly (D, L Lactic co-glycolic acid) Nanofibers, 22nd Iranian Seminar of Organic Chemistry, 19-21 August 2014, Tabriz, Iran.

 

94) S. M. Saeed, H. Mirzadeh, M. Zandi, J. Barzin, Preparation and Evaluation of Electrospun (Polycaprolactone/Pegylated Curcumin) Hybrid as Wound Dressing, International Conference & Exhibition on Advanced & Nano Materials (ICANM), 10-12 August 2015, Ottawa, Canada.

 

95) M. Khorsand, J. Barzin, M. Zandi, Porous Poly Ether Sulfone Composite Membrane with Highly Symmetric Interconnected Pores Structure, International Conference & Exhibition on Advanced & Nano Materials (ICANM), 10-12 August 2015, Ottawa, Canada.

 

96) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, Laser Surface Modication of Polyethersulfone Films: Effect of Laser Wavelength on Biocompatibility, 21st International Laser Physics Workshop Canada. (2015)

 

97) M. Jafari-Nodoushan, J. Barzin, H. Mobedi, Taking advantage of membranes in controlling drug initial burst release of sustained release drug delivery/microspheres, The 12th International Conference on Membrane Science and Technology MTS 2015, 1-3 November 2015.

98) Sh. Tohidi, A. Ghaee, J. Barzin, Preparation and modification of electrospined PLGA nanofibers for wound dressing application., Nanotechnology application in medicine, April 2015, Tehran, Iran.

 

99) B. Sadatnia, F. Mohammadi, J. Barzin, A. Ghadimi, Preparation, and characterization ofPEBA/ZIF-8mixedmatrix membranes for propylene/propane separations, The 12th International Conference on Membrane Science and Technology MTS 2015, 1-3 November 2015.

 

100) S. Karimi., A. Ghaee., J. Barzin., Improving the permeability of PVDF membranes by incorporating β-cyclodextrin modified silica nanoparticles, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.

 

101) M. Moghiseh., A. Homavand., J. Barzin., Investigation of preparation parameters on cellulose acetate membrane structures, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.

 

102) A. Homavand., M. Moghiseh., J. Barzin., Morphological study of cellulose acetate membranes based on hydrophilic additives, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.

 

103) M. Vahedi., J. Barzin., effects of delay time and relative humidity in coagulation process on the structure of PES membranes, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.

 

104) B. Sadatnia., F. Mohammadi., J. Barzin., Ghadimi A., preparation and characterization of PEBA/ZIF-8 mixed matrix membranes for propylene/propane separations, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.

 

105) M. Khorsand, J. Barzin, M. Zandi, Porous Poly Ether Sulfone Composite Membrane with Highly Symmetric Interconnected Pores Structure, International Conference & Exhibition on Advanced & Nano Materials (ICANM 2015)Canada.

 

106) A. Faramarzi, J. Barzin, H. Mobedi, Application of fine biocompatible polymer particles including magnetic nanoparticles for M.R.I imaging, Nanomedicine in the diagnosis and treatment of incurable diseases 18-19 February 2015, Tehran, Iran.

 

107) S. M. Saeed, H. Mirzadeh, M. Zandi, J. Barzin., Preparation and Evaluation of Electrospun (Polycaprolactone/Pegylated Curcumin) Hybrid as Wound Dressing, International Conference & Exhibition on Advanced & Nano Materials (ICANM 2015) Ottawa, Canada.

 

108) A. Faramarzi, J. Barzin, H. Mobedi, Processing Parameters of Electrosprayed Fe3O4 Loaded PLGA Nanoparticles for Utilizing in M.R.I, 14th Iranian Pharmaceutical Science Congress & 1st Symposium of Biopharmaceutics and Pharmacokinetics. (2015)

 

109) A. R. Faramarzi, J. Barzin, H. Mobedi, Characterization of magnetic PLGA nanofibers fabricated by electrospinning technique for hyperthermia and MRI, The 2nd Iranian Nanomedicine Congress 2016 (INMC 2016).

 

110)A. R. Faramarzi, J. Barzin, H. Mobedi, Preparation and characterization of electrospried PLGA nanoparticles for drug delivery systems. Iran Membrane 2015,Tehran,Iran. 

111) A. R. Faramarzi, J. Barzin, H. Mobedi, Size and morphology variation of electrosprayed contrast agent loaded PLGA microparticles, The 2nd Iranian Nanomedicine Congress (INMC 2016).

 

112) A. Faramarzi, J. Barzin, H. Mobedi, Preparation of PLGA biocompatible particles including magnetic materials for M.R.I imaging, Nanomedicine in the diagnosis and treatment of incurable diseases 18-19 February 2015, Tehran, Iran.

 

113) A. Ranjbarzadeh-Dibazar, J. Barzin, P. Shokrolahi, Expanded PTFE membrane preparation for vascular prosthesis, XLIII Annual Congress of the European Society for Artificial Organs  (ESAO2016),Warsa, Poland.

 

114) M. Mohseni Moghaddam, P. Shokrollahi, J. Barzin, Synthesis of nZnHApUPy for bone tissue engineering applications, XLIII Annual Congress of the European Society for Artificial Organs (ESAO2016), Warsa, Poland.

 

115) S. Maleki Esfandabadi, P. Shokrollahi, J. Barzin, Synthesis of a supramolecular hema hydrogel, XLIII Annual Congress of the European Society for Artificial Organs, (ESAO2016), Warsa, Poland.

 

116) M. Mohseni, P. Shokrollahi, J. Barzin, Synthesis and characterization of nZnHApUPy for bone tissue engineering applications, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

117) R. Zamani, P. Shokrollahi, J. Barzin, The effect of solvents system, medium cooling, syringe heating on electrospinning of supramolecular polycaprolactone, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

118) M. Vahedi, J. Barzin, F. Shokrolahi, P. Shokrollahi, Synthesis of Chitosan-Based Hydrogel with Simply Mixing Preparation Approach, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

119) A. Ranjbarzadeh, J. Barzin, P. Shokrollahi, Expanded PTFE Design for Guided Bone Regeneration Membranes, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

120) B. Sadatnia, J. Barzin, A. Soroush, Evaluating the role of thermodynamic and kinetic properties on the morphology of membranes prepared from water/DMAc/PES/PVP, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

121) B. Sadatnia, F. Mohammadi, J. Barzin, Poly (2,6-dimethyl-1,4-phenylene oxide)/zeolitic imidazolite framework-8 mixed matrix membranes for olefin/paraffin separations, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

122) S. Salehishahrabi, J. Barzin, P. shokrollahi, Effect of processing condition and polymer concentration on manufacturing of PET/ PVP fibrous membrane, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

123) A. R. Faramarzi, J. Barzin, H. Mobedi, Size and Morphology of Surfactant Capped Iron Oxide Nanoparticles Loaded in PLGA Fine Particles by Electrospraying, 12th International Seminar on Polymer Science and Technology (ISPST 2016).

 

124) A. R. Faramarzi, J. Barzin, H. Mobedi, Morphological Study of Magnetic Fibrous PLGA Biocomposites Produced by Electrospinning, The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5).

 

125) R. Dehghan, J. Barzin, Z. Kordkatooli, S. Mahdavi, Effect of Relative Energy Difference (RED) of coagulation bath on the structure of polysulfone membrane, 13th International Seminar on Polymer Science and Technology (ISPST 2018), Tehran, Iran.

 

126) R. Dehghan, J. Barzin, Simultaneous effect of low and high molecular weight of polyvinylpyrrolidone on the polysulfone ultrafiltration, The 16th Iranian National Congress of Chemical Engineering, Tehran, 2019.

 

127) Sh. Mahdavi, J. Barzin, M. Safarpour, Investigating the structure of polysulfone/polyvinyl pyrrolidone membrane by changing the phase separation process induced by nonsolvent, The 16th Iranian National Congress of Chemical Engineering, 2019, Tehran, Iran

 

128) F. Haghdoost, S. Hajir Bahrami, J. Barzin, A. Ghaee, preparation of flexible zeolite nanocomposite fibers by electrospining process, 14th International Seminar on Polymer Science and Technology (ISPST 2020), Tehran, Iran.

 

129) M. shojaipour, M. Ghaemy, J. barzin, S.M. Amininasab, M. Vahedi. Hydrogel base on chitosan recyclable ion exchanger for efficient removal of chromate and nitrate from water: Synthesis, characterization and application in membrane, 14th International Seminar on Polymer Science and Technology (ISPST 2020), Tehran, Iran.

 

 

F. Iran Patents:

 

1) J. Barzin, S. S. Madaeni, H. Mirzadeh (2005).Design and Preparation of lab-scale Polyether Sulfone Flat sheet Membranes for Hemodialysis process.No: 32720.

2) J. Barzin, S. S. Madaeni, H. Mirzadeh (2005).Design and Preparation of lab-scale Polyether Sulfone Hollow fiber Membranes for Hemodialysis process.No 32721.

3) S. S. Madaeni, M. Esmaili, J. Barzin (2007).Manufacturing and evaluating the asymmetric and composite polyamide membranes based polyethersulphone for air separation at low pressures, No 38688.

4) S. S. Madaeni, M. Esmaili, J. Barzin (2007).Manufacturing of composite membranes based polyethersulphone via immersion coating procedure for air separation at low pressures. No 38689.

5) J. Barzin, H. Mirzadeh, S. S. Madaeni (2007).Introduce and identification of flat sheet membrane defects and removing methods. No 38745.

6) J. Barzin, H. Mirzadeh, S. S. Madaeni (2007).A novel method for reduction of platelet adhesion on hemodialysis membranes for high performance application. Iran Patent, No 38746.

7) J. Barzin, H. Mirzadeh, S. S. Madaeni (2007).Preparation and Modification of Polyether Sulfone Hollow fiber Hemodialysis Membranes for high performance. No 38747.

8) J. Barzin, H. Mahdavi, M. Kermani (2008). Design and manufacture of automatic machine for hollow fiber collection. No 52655.

9) J. Barzin, H. Mahdavi, M. Kermani (2008).Design and manufacture of spinneret die for hollow fiber production. No 52656.

10) J. Barzin, H. Mahdavi, M. Kermani (2008).Design and manufacture of sorting machine for hollow fiber production. No 52657.

11) M. Naeimi seresht, A. Karkhaneh, J. Barzin (2010).Preparation of PDMS membrane for NaCl difiusion.No 67620

12) H. Farokhzad, H. Mobedi, J. Barzin, A. Poorkhalil (2010).Preparaton of dental in situe nanocomposite drag delivery system (In vitro study) No 65351.

13) J. Barzin, A. Ranjbarzadeh, P. Shokrollahi, A. Rahimi (2017).Fabrication and characterization of PTFE membrane by use of oligomeric plastisizer with the boiling and degradation temperature upper than 150, Iran Patent, No 91043.

14) J. Barzin, H. Mirzadeh, M. zandi, S. M. Saeid (2016).Preparation of threelayer curcumin loaded wound healing by use of electrospray methods, No 88710.

15) J. Barzin, M.Kowsari, M.Vahedi, (2016).Preparation of symmetric and asymmetric membranes and mixed structure. No; 89361

16) J. Barzin, M. Jaafari-Nadoushan, H. Moubedi (2017). Micro particles production devise by electrostatic sputtering, No 92792.

17)  J. Barzin, H. Mobedi, A.Faramarzi, Preparation of PLGA fine particles including paramagnetic nano particles coated by oleic acid with electrospray method. No: 98922.

18) M.Vahedi, F.Shokrollahi, J. Barzin, P.Shokrollahi, Preparation of injectable and self-healing hudrogelbased on natural polymer. No: 99704.

19) P.Shokrollahi, J. Barzin, A.Ranjbarzadeh, Making all instruments for producing artificial vascular based on PTFE. No: 104721

 

 

G. Books:
 
1) J. Barzin, M. Esmaeili. "Membrane cleaning and renew methods", (in Persian), IPPI Press, 2010.
 
2) A. Ghaee, M. Shariaty-Niassar, J. Barzin.
 The effect of chitosan membrane preparation parameters on removal of copper ions (Chapter 12).   "Sustainable Membrane Technology for Energy, Water, and Environment ", Wiley, 2012.

 

3) Faramarzi, A. R., J. Barzin., Mobedi, H., Gorji, M. Polymeric pharmaceutical nanoparticles developed by electrospray (Chapter 6).  "Nanostructures for Novel Therapy .Synthesis, Characterization and Applications" Elsevier, 2017.

 

4) Jafari-Nodoushan, M., Mobedi, H., J. Barzin. Encapsulation via electrohydrodynamic atomization spray technology (Electrospray) (Chapter 22).  "Handbook of encapsulation and controlled release" CRC Press, Boca Raton, Florida, 2015.

 

H. Honors:

 - Winner of "The 12th Razi Research Festival on Medical Sciences" (December 2006)

 - First place winner of "The 3th national symposume of young elites" (2009)

  - Selected as The Excelent lecture  presentation in “ The 4th International Seminar on Polymer   Science and Technology" (ISPST 2005)

 - Selected as the Best Book (work worthy of recognition) in “The Oil Industry Book Festival “ (2013)

 I. M.Sc. & Ph.DStudents:

Ahmad Abarghooei, Atefeh Afroozan, Peyman Akbari, Fahimeh Alipoor, Zahra Ashraf, , Shaghayegh Baghapour, Hamideh Babaloo, Fahimeh Bani Hashemi, Farnaz Bayervand, Hoda Beheshti, Rahim Dehghan, Rashheh Eshraghi, Majid Esmaeili, Rahim Faramarzi, Azadeh Ghaee,Mohammad Hosein Ghanian, Hoda Gholizadeh, Fatemeh Haghdoost, Ali Haghighat, Mahsa Hakkani, Yasaman Hamedani, Somayeh Hashemi Nasab, Adeleh Hashemi Panah, Anahita Homavand, Pooya Jafari, Milad Jafari Nadooshan, Mina Jafari Nasab, Majid Kamali, Saeed Karimi, Mohammad Kazemi Ashtiani, Kiana Khadem, Mahdi Khalifeh loo, Sakineh Khezli, Shahla Mahdavi, Sara Maleki, Marzieh Moghiseh, Mahshad Mohseni Moghadam, Mahdieh Mortazavi, Susan  Mokhtari, Ali Mota, Mitra Naeimi Seresht, Ahad Rabbani Doost, Arash Ranjbarzadeh, Mahdi Saeed, Sara Salehi Shahrabi, Mahdieh Safarpour, Maryam Shojaeepour, Adel Soroush, Saeed Taghavi, Mahsa Talebi, Ali Taslimi, Pania Terraf, Shabnam Tohidi, Mohammad Vahedi, Melika Zakeri, Reza Zamani,