Soheil Dariushi Assistant Proffesor
Soheil Dariushi, Assistant Proffesor, Polymer Processing Department, Composite Group, Iran Polymer and Petrochemical Institute Pajouhesh Blvd., Tehran, Iran, P.O. Box: 14975-112 Tel: (+9821) 48662485, E-mail: s.dariushi@ippi.ac.ir USEFUL LINKS:
1. N. Mosleh, A. M. Rezadoust, S. Dariushi* “Determining process-window for manufacturing of continuous carbon fiber-reinforced composite using 3d-printing”, Materials and Manufacturing Processes, 36 (4), 409-418, 2021. 2. S. Rezaei, J. Kadkhodapour*, R. Hamzehei, B. Taherkhani, A.P. Anaraki, S. Dariushi “Design and modeling of the 2D auxetic metamaterials with hyperelastic properties using topology optimization approach”, Photonics and Nanostructures-Fundamentals and Applications, 43, 100868, 2021. 3. S. Dariushi*, S. Farahmandnia, A.M. Rezadoust “An experimental investigation on infusion time and strength of fiber metal laminates made by vacuum infusion process”, Proceeding of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, https://doi.org/10.1177/1464420720941890. 4. S. Dariushi*, A.M. Rezadoust, R. Kashizadeh “Effect of processing parameters on the fabrication of fiber metal laminates by vacuum infusion process”, Polymer Composites, 40 (11), 4167-4174, 2019. 5. H. Khoramishad*, H. Alikhani, S. Dariushi, "An experimental study on the effect of adding multi-walled carbon nanotubes on high-velocity impact behavior of fiber metal laminates", Composite Structures, 201, 561-569, 2018. 6. R. Hamzehei, J. Kadkhodapour*, A.P. Anaraki, S. Rezaei, S. Dariushi, A.M. Rezadoust, "Octagonal auxetic metamaterials with hyperelastic properties for large compressive deformation", International Journal of Mechanical Sciences 145, 96-105, 2018. 7. S.J. Salami*, S. Dariushi, "Geometrically nonlinear analysis of sandwich beams under low velocity impact: analytical and experimental investigation", Steel and Composite Structures, 27 (3), 273-283, 2018. 8. S. Dariushi*, M Sadighi, "Analytical/Empirical Study on Indentation Behavior of Sandwich Plate with Foam Core and Composite Face Sheets", Iranian Journal of Polymer Science and Technology, Vol. 30, No. 3, 235-245, 2017 (Persian). 9. S. Rashiddadash, M. Sadighi, S. Dariushi*, "Experimental and numerical investigation of sandwich panels with bilateral connection under static loading", Jouranl of science &Technology of Composites, DOI: 10.22068/JSTC.2018.72568.1375 10. S. Rashiddadash, M. Sadighi, S. Dariushi*, "An Experimental and numerical investigation on low velocity impact properties of sandwich panels with bilateral connection", Modares Mechanical Engineering, 18 (4), 23-31, 2018 (Persian). 11. S.Jedari Salami*, S.Dariushi, M. Sadighi, M.Shakeri, “An advanced high-order theory for bending analysis of moderately thick faced sandwich beams”, European Journal of Mechanics / A Solids, , 56, 1-11, 2016. 12. S. Dariushi, M. Sadighi* “A new nonlinear high order theory for Sandwich beams: an analytical and experimental investigation”, Composite Structures, 108, 779-788, 2014. 13. S. Dariushi, M. Sadighi* “A Study on Flexural Properties of Sandwich Structures with Fiber/Metal Laminate Face Sheets”, Applied Composite Materials, 20(5), 839-855, 2013. 14. E.Sadeghpour, M. Sadighi*, S. Dariushi “An Investigation on Blunt Notch Behavior of Fiber Metal Laminates Containing Notch with Different Shapes”, Journal of Reinforced Plastics and Composites, 32(15), 1143-1152, 2013. 15. S. Ebrahim Moussavi-Torshizi, Soheil Dariushi, Mojtaba Sadighi*, Pedram Safarpour “A study on tensile properties of a novel fiber/metal laminates”, Materials Science and Engineering A, 527, 4920–4925, 2010. 16. M. Sadighi*, S. Dariushi “An Experimental Study of the Fiber Orientation and Laminate Sequencing Effects on Mechanical Properties of GLARE”, Proc. IMechE, part G. Journal of Aerospace Engineering, 222(7), 1015-1024, 2008. 17. S. Dariushi and M. Sadighi*, “Analytical/Empirical Study on Indentation Behavior of Sandwich Plate with Foam Core and Composite Face Sheets”, Iranian Journal of Polymer Science and Technology, 30, 235-245, 2017 (Persian). 18. S. Dariushi, M. Sadighi*, "Analysis of Composite Sandwich Beam with Enhanced Nonlinear High Order Sandwich Panel Theory", Modares Mechanical Engineering, 14 (16), 1-8, 2015 (Persian). 19. M. Sabzikar Boroujerdy, S. Dariushi, M. Sadighi*, “Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet”, Iranian Journal of Polymer Science and Technology, 25(5), 375-382, 2012 (Persian). 20. M. Sabzikar Boroujerdy, S. Dariushi, M. Sadighi*, “Fiber Metal Laminates under Low Velocity Impact:An Experimental / Analytical Approach”, Iranian Journal of Polymer Science and Technology, 24(1), 69-78, 2011 (Persian). 21. M. Sadighi*, M. Tajdari, S. Dariushi, “An investigation on tensile properties of Glass fiber/Aluminum Laminates”, Iranian Journal of Polymer Science and Technology, 22(1), 31-39, 2008 (Persian). 22. M. Sadighi*, S. Dariushi, “An experimental study on impact behabior of Fiber/Metal Laminates”, Iranian Journal of Polymer Science and Technology, 21(4), 315-327, 2008 (Persian). 1. N. Mosleh, S. Dariushi, M.Esfandeh “Investigation of Flexural Properties of 3D Printed Continuous Fiber-Reinforced Composites”, International Seminar on Polymer Science and Technology (2020). 2. N. Raghbati, N. Mosleh, S. Dariushi, M. Esfandeh, “An Investigation on Flexural Properties of 3D Printed Composites”, International Seminar on Polymer Science and Technology (2020). 3. Zahra Shirband, Morteza Behzadnasab, Soheil Dariushi, “The Effect of Different Post-Curing Methods on Hardness and Swelling Properties of Stereolithography 3d Printed Parts”, International Seminar on Polymer Science and Technology (2020). 4. S Kaviani-Samani, S Bagheri-Khoulenjani, H Mirzadeh, S Dariushi, “Biodegradable 3D Printed Scaffolds Based on PLA for Bone Tissue Engineering”, International Seminar on Polymer Science and Technology, (2018). 5. Soheil Dariushi, “Influence of Cut-out Shape on Buckling Behavior of Composite Beams”, 13th International Seminar on Polymer Science and Technology (2018). 6. S. Alirezaei, Soheil Dariushi, M.H. Beheshty, “Tensile Properties of Jute/Epoxy/Aluminum hybrid Laminates”, 13th International Seminar on Polymer Science and Technology (2018). 7. Soheil Dariushi, Melika Ahmadi, Amir Masoud Rezadoust, “Deformation and Energy Absorption of 3D Printed Curved Panels”, 12th International Seminar on Polymer Science and Technology (2016). 8. Soheil Dariushi, Mojtaba Sadighi, “Impact on Sandwich Structures with Fiber/Metal Laminates Face Sheets”, 12th International Seminar on Polymer Science and Technology (2016). 9. Soheil Dariushi, “Effect of Aluminum Surface Treatment Process on Shear Strength of GLARE”, 12th International Seminar on Polymer Science and Technology (2016). 10. S. Dariushi, M. Sadighi “A Study on Flexural Properties of Sandwich Structures with Fiber/Metal Laminate Face Sheets”, 17th International Conference, Mechanics of Composite Materials (2012). 11. S. Dariushi, M. Sadighi “Study Impact Loading on Hybrid Glass-Epoxy/Aluminum Laminate”, International Seminar of Polymer Science and Technology (2012). 12. M. Sadighi, S. Dariushi “Improving Impact Properties of Fiber/Metal Laminates by Using Suitable Layer Arrangement According to Different Standard Test Methods”, Proc. ASME. 43772, Volume 4: Design and Manufacturing 69 (2009). M. Sadighi, S. Dariushi “Effect of Fiber Orientation and Stacking Sequence on Bending Properties of Fiber/Metal Laminates”, Proc. ASME. 48654, Volume 4: Design and Manufacturing 85 (2008).
Title: 3D-printing of continuous carbon fiber reinforced thermoplastic composites (Awarded a national grant from Iran’s Vice-Presidency for Science and Technology) Date: 2019-now Title: Experimental investigation on natural fiber composites and sandwich panels Date: 2018-2020 Title: Fabrication of Fiber Metal Laminates with vacuum infusion Method Date: 2016-2018 Title: Effect of various aluminum surface treatments on mechanical properties of Fiber Metal Laminates Date: 2015-2016 |
Aryanic webdesign توسط highportal aryanic